Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

111.91

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

11.04

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Fixings kit for Standard Set 02

Fixings kit for Standard Set 02

32.57

The set of nuts, bolts and washers for fitting Polybush Set02.

Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.

These fixings can also be used with the original suspension bushes.

find out more

Clevis for Hand Brake Linkage

Clevis for Hand Brake Linkage

3.66

Application: Series 1, 2 & 3.
Description: Reproduction clevis with pin for hand brake linkage. Threaded for 5/16"UNF rod.
Approximate dimensions: overall length 46mm (1.8")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Land Rover Paint Colours and Codes

Over the last sixty years Land Rover have used an enormous range of colours. So here we have gathered together as much information as we can on those colours, with part numbers, colour codes etc. This list may not be complete, but we have done our best. However if you spot an omission or error please let us know so we can add/correct things.

We have provided the list in four formats;

 Follow the links for  Full list in alphabetical order by colour name

List sub-divided  by model and then in colour group order

List sub-divided by colour groups

List in colour code order

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Diff Pinion Bearing, Outer

Diff Pinion Bearing, Outer

32.20

Application: Series 1 and early Series 2.

Description: Taper roller bearing on outer end of pinion gear in differential.

Approximate dimensions: Outside diameter 72.7mm(2.86"), inside diameter 31.8mm(1.25"), thickness 30.3mm(1.19")

Bearing numbers: Inner 4T-31888, outer 4T-3120

Previous part number: 219550

find out more

Shim for Outer Bearing of Diff Pinion, 0.020"

Shim for Outer Bearing of Diff Pinion, 0.020

1.44

Application: Series 1 and Series 2 differentials.

Description: 0.020" thick shim for setting position of differntial pinion and bearing pre-load.

Approximate dimensions: outside diameter 41mm (1.6"), inside diameter 32.5mm (1.28").

find out more

Bypass Hose Series 1

Bypass Hose Series 1

14.54

Application: Series 1 with 2 litre petrol engine.

Description: Reproduction thermostat bypass hose.

Approximate dimensions: Length 23cm(9"), internal diameter 35mm(1.4")

find out more

Carburettor Balancer

Carburettor Balancer

33.94

Description: For syncronizing multiple carburettor engines. Works with side draught, downdraught and anything in between. Supplied with instructions.

Approximate dimensions: Outside diameter of suction head 75mm(3")

find out more

Instrument Panel - 80"

Instrument Panel - 80

52.80

Application: Series 1 1948 to 1953.

Description: Reproduction in pressed aluminium of instrument panel.

Approximate dimensions: Overall length 38cm(15"), height 12.6cm(5"), depth 1cm(3/8")

Old part number: 238027

find out more

Lens Stop/Tail

Lens Stop/Tail

7.80

Application: Series 2A and Series3.

Description: Lens for stop/tail laml with reflector in centre and window in bottom for number plate illumination.

Approximate dimensions: Overall diameter 89mm(3.5"), height 52mm(2")

find out more

Top Shock Mount Rear RH

Top Shock Mount Rear RH

43.66

Description: Top shock absorber mount for rear right hand on Discovery 2.


find out more

Top Shock Mount Rear LH

Top Shock Mount Rear LH

43.66

Description: Top shock absorber mount for rear left hand on Discovery 2.

find out more

Solid Aluminium Rivets - 3/8" long - bag of 50

Solid Aluminium Rivets - 3/8

13.20

Application: Series 1, Series 2 and Series 3.

Description: Bag of 50 solid aluminium round head rivets 3/16" diameter by 3/8" long stem. The head is 8.5mm diameter and overall length of rivet is 13mm.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -