Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>
Nut - Front Halfshaftr 109 Series3 Ref: 549475
Application: Series 3 109.

Description: Special nut for outer end of front halfshaft on Series3 long wheelbase models and short wheel base models from July 1980.

Approximate dimensions: Overall diameter 38mm(1.5"), height 14.3mm(0.6")

Price: 3.25 (3.90 Including VAT at 20%)



Nut - Front Halfshaftr 109 Series3
Cap for Hub Flange Ref: 219098
Application: Series 1, Series 2 and Series 3.
Description: Replacement protection cap for half shaft nut. Finish may be either shiney or dull plating as stock varies.

Price: 0.95 (1.14 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
2. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
3. Series 3 Hub Bearing Kit (Ref: WHEELBRGKIT02)
Cap for Hub Flange
Retaining Collar Half-Shaft Bearing Ref: 90217398D
Application: Series 1, 2 & 3 front axle.
Description: Replacement retaining collar for inner race of bearing for front half shafts.
Approximate dimensions: outside diameter 44.4mm(1.75"), inside diameter 34.8mm (1.25"), length 25mm (1.0")
Original part number: 217398

Price: 7.66 (9.19 Including VAT at 20%)




People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Universal Joint for Front Half-Shafts (Ref: RTC3690)
3. Inner Wheel Hub Seal (Ref: RTC3510)
Retaining Collar Half-Shaft Bearing
Bush for Front Stub Axle Ref: 217354
Application: Series 1 and early Series 2.

Description: Bronze bush in stub axle to support outside end of front halfshaft.

Approximate dimesions: Outside diameter 55mm(1 3/8"), inside diameter 32mm(1 1/4"), depth 19mm(3/4").

Price: 17.37 (20.84 Including VAT at 20%)



Bush for Front Stub Axle
Swivel Pin Conversion Kit Ref: 532268D
Application: All Series 1 models and Series 2 where fitted with the sprung cone top swivel pin.

Description: Replacement kit to convert sprung cone type top swivel bearings to the later style 'Railko' bush type. This kit converts both top swivel bearings on the front axle.

Price: 32.03 (38.44 Including VAT at 20%)




People who bought this item also bought:
1. Spigot Bush (Ref: LFB500050)
2. Exhaust Mounting Bracket Assembly (Ref: BRKT3)
3. Exhaust Mounting Bracket Assembly (Ref: BRKT1)
Swivel Pin Conversion Kit
Replacement Swivel Pin Kit for S2A & S3 Ref: SWIVELPINKIT02
Application: Series 2A from mid 1960s with non-pendent ball joints and Series 3 (except 109 V8).
Description: Kit to rebuild one swivel housing. Contians top pin, bush and thrust washer, Timken (or NTN depending on availability) bottom bearing, swivel seal, gasket to axle tube, 'O' ring for bottom pin, 4x lock tabs and 7x assorted shims.

Price: 33.83 (40.60 Including VAT at 20%)




People who bought this item also bought:
1. Retainer Swivel Housing Oil Seal (Ref: 235968D)
2. Genuine One Shot Swivel Housing Grease (Ref: STC3435)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Replacement Swivel Pin Kit for S2A & S3
Special Stud - Swivel Pin Housing Ref: 90508153
Application: Series 1 and early Series2 and 2A.

Description: Special stud for retaining top and bottom swivel pins. 3/8" BSF with overall length of 1 7/8" (47.6mm), but with central unthreaded part 10.1mm(0.4") diameter to give exact fit for pins. Used in conjunction with 90508152.

Previous part number 508153

Sorry, currently we have no supplier for these.

Price: 1.85 (2.22 Including VAT at 20%)



People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Universal Joint for Front Half-Shafts (Ref: RTC3690)
3. Retaining Collar Half-Shaft Bearing (Ref: 90217398D)
Special Stud - Swivel Pin Housing
Replacement Swivel Housing S1, S2a & S3 Ref: 539741D
Application: Series 1, Series 2 & 2A, Series 3 (except 109 V8).

Description: Replacement swivel housing for front axle with chrome finish.

Original part number: 234789.

Price: 95.47 (114.56 Including VAT at 20%)



Replacement Swivel Housing S1, S2a & S3
Genuine One Shot Swivel Housing Grease Ref: STC3435
Application: Series 1, Series 2 & 2A, Series 3, Defender, Discovery 1, Range Rover Classic.

Description: 375ml sachet of semi-fluid grease. Correct volume to fill one swivel housing. Replaces EP90 oil and is considerably less prone to leak.

Price: 6.71 (8.05 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Swivel Pin Kit for S2A & S3 (Ref: SWIVELPINKIT02)
2. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
3. Inner Wheel Hub Seal (Ref: RTC3510)
Genuine One Shot Swivel Housing Grease
Gaiter Kit for Swivel Housings Ref: 276954D
Application: Series 1, Series2, Series 2A and Series 3.

Description: Replacement pair of leather gaiters and fixing kit for the swivel housings on the front axle. Protect your swivel housings from road salt and other forms of corrosion.



Price: 15.85 (19.02 Including VAT at 20%)




People who bought this item also bought:
1. Gasket, front Stub Axle to Swivel Housing (Ref: 277289)
2. Seal Axle Tube (Ref: 217400)
3. Gasket Swivel Housing to Axle Tube (Ref: 232413)
Gaiter Kit for Swivel Housings
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -