Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>
Rear Half-Shaft Right Hand Ref: 591378D
Application: Series 2A with Rover type rear axle, Series 3 short wheel base to June 1980.

Description: Replacement right hand rear half shaft. 10 spline drive at both ends, outer splines with location ears. Outer ended threaded 5/8"BSF and drilled for split pin.

Approximate dimensions: Overall length 66.3mm(26.1"), splined outer diameters 28mm( 1.1"), shaft diameter 27mm(1.06")

Price: 18.50 (22.20 Including VAT at 20%)



Rear Half-Shaft Right Hand
Rear Half-Shaft Left Hand Ref: 591379D
Application: Series 2A with Rover type rear axle, Series 3 short wheel base to June 1980.

Description: Replacement left hand rear half shaft. 10 spline drive at both ends, outer splines with location ears. Outer ended threaded 5/8"BSF and drilled for split pin.

Approximate dimensions: Overall length 88.6mm(34.9"), splined outer diameters 28mm( 1.1"), shaft diameter 27mm(1.06")

Price: 19.90 (23.88 Including VAT at 20%)



Rear Half-Shaft Left Hand
Rear Half-Shaft Right Hand Ref: FRC1644D
Application: Series 3 short wheel base (88") from July 1980 onwards.

Description: Replacement right hand half-shaft for rear axle. This is the later type with 24 spline outer end secured by circlip. Inner end is 10 spline.

Approximate dimensions: Overall length 65cm(25.6"),

Price: 18.50 (22.20 Including VAT at 20%)



Rear Half-Shaft Right Hand
Rear Half-Shaft Left Hand Ref: FRC1645D
Application: Series 3 short wheel base (88") from July 1980 onwards.

Description: Replacement left hand half-shaft for rear axle. This is the later type with 24 spline outer end secured by circlip. Inner end is 10 spline.

Approximate dimensions: Overall length 87.3cm(34.3"),

Price: 18.50 (22.20 Including VAT at 20%)



Rear Half-Shaft Left Hand
Rear Half-Shaft Right Hand Ref: 576767D
Application: Late Series 2A and Series 3 109 Long Wheelbase models with Salisbury back axle.

Description: Replacement right hand (short) half-shaft with 24 sline ends. Outer end grooved for circlip.

Approximate dimensions: Overall length 65.3cm(25.7"), maximum diameter of splined ends 31.3mm(1.23"), shaft diameter 30.3mm(1.19")

Price: 22.50 (27.00 Including VAT at 20%)



Rear Half-Shaft Right Hand
Rear Half-Shaft Left Hand Ref: 576768D
Application: Late Series 2A and Series 3 109 Long Wheelbase models with Salisbury back axle.

Description: Replacement left hand (long) half-shaft with 24 sline ends. Outer end grooved for circlip.

Approximate dimensions: Overall length 83.2cm(32.8"), maximum diameter of splined ends 31.3mm(1.23"), shaft diameter 30.3mm(1.19")

Price: 24.00 (28.80 Including VAT at 20%)



Rear Half-Shaft Left Hand
Front Inner Half-Shaft Left Hand Ref: 276720
Application: Series 2A and Series 3.

Description: Genuine inner half-shaft left hand. 10 spline inner end.

Approximate dimensions: Overall length 72cm(28.3"), yoke 81mm(3.2") across faces.

Price: 85.00 (102.00 Including VAT at 20%)



Front Inner Half-Shaft Left Hand
Replacement Stubshaft Front Axle Ref: 608023D
Application: Series 3 long wheel base up to October 1980.

Description: Replacement outer stub half-shaft for front axle. 24 spline outer end.

Approximate dimensions: Overall length 26.5cm(10.4"), thread 7/8"UNF.

Price: 22.91 (27.49 Including VAT at 20%)



Replacement Stubshaft Front Axle
Universal Joint for Front Half-Shafts Ref: RTC3690
Application: Series 1 1952 onwards, Series 2 & 3 front axles.
Description: GKN boxed universal joint for front half-shafts.
Approximate dimensions: 75.5mm (3") across caps, 27mm (1.06") diameter caps.
Original part number: 242521

Price: 12.00 (14.40 Including VAT at 20%)




People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Special Stud - Swivel Pin Housing (Ref: 90508153)
3. Retaining Collar Half-Shaft Bearing (Ref: 90217398D)
Universal Joint for Front Half-Shafts
Drive Flange 10 Spline Ref: 571235
Application: Series 1 and Series 2 - all models. Series 3 short wheel base models to mid 1980.

Description: Original equipment specification 10 spline drive flange.

Approximate dimensions: Overall diameter 11.4cm(4.5"), height 50mm(2").

Old part number 217378.

Price: 16.00 (19.20 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
2. Brake Drum for 10" Brakes (Ref: 591661D)
3. Clamp Kit for Steering Rods (Ref: 577898KIT)
Drive Flange 10 Spline
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -