Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>
Nut and Bolt Kit for Propshafts Ref: PROPFIX01
Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Gasket for Differential to Axle Casing (Ref: 7316)
2. Swivel Pin Conversion Kit (Ref: 532268D)
3. Seal Axle Tube (Ref: 217400)
Nut and Bolt Kit for Propshafts
Replacement Universal Joint Kit Ref: RTC3291=
Application: Series 1 and Series 2/2A to approximately 1964.
Description: Universal joint repair kit including 4 circlips and a grease nipple.
Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").
Original part number 43023.

Price: 9.62 (11.54 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Replacement Universal Joint Kit
GKN boxed Universal Joint Kit Ref: RTC3346
Application: Late Series 2A, Series 3, Classic Range Rover to 1985 and early 90/110.
Description: GKN Driveline U100 universal joint repair kit including 4 circlips and a grease nipple.
Approximate Dimensions: Distance across faces of joint 82mm (3.23"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").

Price: 9.95 (11.94 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
GKN boxed Universal Joint Kit
Replacement Universal Joint Kit Ref: RTC3346D
Application: Late Series 2A, Series 3, Classic Range Rover to 1985 and early 90/110.

Description: Replacement universal joint repair kit including 4 circlips and a grease nipple.

Approximate Dimensions: Distance across faces of joint 82mm (3.23"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").

Price: 7.00 (8.40 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Replacement Universal Joint Kit
Genuine Propshaft Gaiter Ref: 276484
Application: Series 1, Series 2/2A, Series 3, early 90/110, Classic Range Rover.

Description: Genuine gaiter and 2 clips for sliding joint on front and rear propellor shafts.

Price: 22.58 (27.10 Including VAT at 20%)



Genuine Propshaft Gaiter
Replacement Propshaft Gaiter Kit Ref: 276484D
Application: Series 1, Series 2/2A, Series 3, early 90/110, Classic Range Rover.

Description: Replacement gaiter and 2 clips for sliding joint on front and rear propellor shafts.

Price: 3.00 (3.60 Including VAT at 20%)




People who bought this item also bought:
1. Rear Shock Absorber (Ref: RTC4442D)
2. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
3. Replacement Suspnsion Bush (Ref: 90577434D)
Replacement Propshaft Gaiter Kit
Yoke for Propshaft Ref: 8407L
Application: Late Series 2A and Series 3.

Description: Yoke and sliding joint sheath for propellor shaft. This is for the later propshafts that use RTC3346 universal joints. Sheath has 16 splines.

Approximate dimensions: Overall length 15.2cm(6"), across yoke 8.8cm(3.5"), shaft diameter 42.8mm(1.7")

Price: 34.86 (41.83 Including VAT at 20%)





Related products:
1. GKN boxed Universal Joint Kit (Ref: RTC3346)
2. Replacement Universal Joint Kit (Ref: RTC3346D)
Yoke for Propshaft
Flange for Propshaft Ref: 600656
Application: Late Series 2A and Series 3.

Description: Replacement drive flange for propshafts that use the RTC3346 type of universal joint.

Approximate dimensions: Overall diameter 97mm(3.8"), across flats of yoke 89.4mm(3.5"), height 55.7mm(2.2").

Price: 8.00 (9.60 Including VAT at 20%)





Related products:
1. GKN boxed Universal Joint Kit (Ref: RTC3346)
2. Replacement Universal Joint Kit (Ref: RTC3346D)
Flange for Propshaft
Splined Shaft for Propshaft Ref: 601790
Application: Late Series 2A and Series 3.

Description: Splined male shaft for repair of propellor shafts with 16 splines. Please note the use of this item requires welding to be fitted. If this shaft is not fiited 'true' to main tube of propshaft, the propshaft will be out of balance and will cause considerable vibration. A job for the experienced engineer only!

Approximate dimensions: Overall length 15.5cm(6.1")

Price: 12.00 (14.40 Including VAT at 20%)





Related products:
1. Yoke for Propshaft (Ref: 8407L)
Splined Shaft for Propshaft
Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings Ref: WHEELBRGKIT01N
Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

Price: 33.28 (39.94 Including VAT at 20%)




People who bought this item also bought:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
2. Bolt 3/8" BSF x 1 1/4" long (Ref: 90576510)
3. Swivel Pin Conversion Kit (Ref: 532268D)
Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -