Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Pack of 10 3/8"BSF Nyloc Nuts

Pack of 10 3/8

1.92

Pack of ten 3/8"BSF nyloc nuts, 19/32"(15mm) across flats, 0.45"(11.5mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5   >   >>
Gudgeon Pin Tool Ref: LRT-12-126
Application: All Rover V8 engines.
Description: Tool to remove and replace gudgeon pins (wrist pins) on V8 pistons. Also needs 12mm or 1/2" diameter bolt and nut approx 30cm (12") long.

Price: 125.76 (150.91 Including VAT at 20%)



Gudgeon Pin Tool
Remover Crankshaft Oil Seal Ref: LRT-12-133
Application: Freelander 1 with 1.8 petrol (gasolene) engine, Freelander 2 with 2.2 litre diesel engine.
Description: Tool for the removal of the crankshaft oil seal, used in conjunction with LRT-37-010
Approximate dimensions: overall diameter 40mm (1.6"), overall length of body 76mm (3.0").
New tool part number: 303-935

Price: 48.26 (57.91 Including VAT at 20%)





Related products:
1. Adaptor for Removal of Oil Seal Collar (Ref: LRT-37-010)
Remover Crankshaft Oil Seal
Camshaft Locking Tools Ref: LRT-12-134
Pair of locking tools for camshafts on twin overhead camshaft engine.
Application: Freelander 1.8 petrol engine (18k)

Price: 23.30 (27.96 Including VAT at 20%)



Camshaft Locking Tools
Cylinder Pressurisation and Collet Removal Kit Ref: LRT-12-142
Application: Freelander 1.8 litre petrol 1997 to 2006.
Description: Used with LRT-12-071 & LRT-12-139 for the removal and replacement of valve stem seals. Adaptor screws into spark plug hole and pressurises cylinder via airline. This keeps valves closed and allows sleeve part to remove spring collets.

Price: 101.02 (121.22 Including VAT at 20%)





Related products:
1. Remover Valve Stem Seal (Ref: LRT-12-071)
Cylinder Pressurisation and Collet Removal Kit
Tensioning Tool for Camshaft Belt Ref: LRT-12-143
Tensioning tool for camshaft/timing belt.
Application: Freelander fitted with L series 2.0litre diesel engine.

Price: 37.68 (45.22 Including VAT at 20%)



Tensioning Tool for Camshaft Belt
Flywheel Locking Tool 1.8P Freelander Ref: LRT-12-145
Application: Freelander 1.8 Petrol.
Description: Flywheel locking tool for Freelander 1.8 petrol engine.

Price: 56.55 (67.86 Including VAT at 20%)



Flywheel Locking Tool 1.8P Freelander
Remover, Camshaft Oilseals Ref: LRT-12-147
Remover for the camshaft oilseals on twin overhead camshaft engine.
Application: Freelander 1.8 petrol engine (18K).

NB. this tools needs to be used in conjunction with LRT-12-129 or metric fine bolt M16 1.5mm pitch by 100mm long (ANR2570 is a possible alternative)
New tool number: 303-949

Price: 58.68 (70.42 Including VAT at 20%)



Remover, Camshaft Oilseals
Replacer Camshaft Oilseals Ref: LRT-12-148A
Replacer for camshaft oilseals on twin overhead camshaft engine.
Application: Freelander 1.8 petrol engine (18K)

Price: 15.53 (18.64 Including VAT at 20%)



Replacer Camshaft Oilseals
Clutch Centralising Tool TD5 Ref: LRT-12-152
Description: Tool to centralise clutch disc to flywheel.
Application: Defender 2002 on fitted TD5 engine, Discovery II 2002 on fitted with TD5 engine

Price: 25.36 (30.43 Including VAT at 20%)



Clutch Centralising Tool TD5
Injector Remover TD5 Ref: LRT-12-154-1
Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

Price: 98.16 (117.79 Including VAT at 20%)




People who bought this item also bought:
1. Timing Pins - TD5 (Ref: ZZLAS4052)
2. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
3. Gasket Water Pump S1 (Ref: 9118)
Injector Remover TD5
Page:   <<   <  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -