Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2  3  4  5   >   >>
Crank Timing Pin BMW Ref: LRT-12-108
Application: 2nd Generation Range Rover (38A) 1995 to 2001 when fitted with BMW diesel engine.
Description: Crankshaft timing pin. Used in conjunction with LRT-12-115 and LRT-12-172.
BMW tool number: 11-2-300
Approximate dimensions: overall length 129mm (5.1"), overall diameter 12.5mm (0.5").

Price: 29.20 (35.04 Including VAT at 20%)





Related products:
1. Timing Chain Tensioner Release (Ref: LRT-12-115)
2. Pair of Locking Pins (Ref: LRT-12-172)
Crank Timing Pin BMW
Camshaft Position Plate - BMW Ref: LRT-12-112
Application: 2nd Generation Range Rover (38A) 1995 to 2001 when fitted with BMW diesel engine.
Description: Tool to lock camshaft in position for timing and similar operations.
BMW tool number: 11-3-320

Price: 206.52 (247.82 Including VAT at 20%)



Camshaft Position Plate - BMW
Pair of Tensioner Pins - BMW Ref: LRT-12-114
Application: 2nd Generation Range Rover (38A) 1995 to 2001 when fitted with BMW diesel engine.
Description: Pair of pins for retaining the timing chain tensioners.
BMW tool number: 11-3-340

Price: 16.42 (19.70 Including VAT at 20%)



Pair of Tensioner Pins - BMW
Timing Chain Tensioner Release Ref: LRT-12-115
Application: Range Rover 2nd generation (38A) fitted with BMW 2.5 litre diesel engine.
Description: Tool to release timing chain tensioner, used in conjunction with LRT-12-172 and LRT-12-108.
New tool part number: 303-919
BMW tool number: 11-3-360
Overall length: 33.5cm (13.2")

Price: 64.64 (77.57 Including VAT at 20%)





Related products:
1. Pair of Locking Pins (Ref: LRT-12-172)
2. Crank Timing Pin BMW (Ref: LRT-12-108)
Timing Chain Tensioner Release
Wrench for Injector Pipes Ref: LRT-12-117
Application: BMW diesel in Range Rover 2, 1995 to 2001.
Description: wrench for injector pipes.

Price: 65.02 (78.02 Including VAT at 20%)



Wrench for Injector Pipes
Injection Pump Adjuster Ref: LRT-12-118
Application: Range Rover 2nd generation (38A) fitted with BMW 2.5 litre diesel engine.
Description: Tool for adjusting injection pump timing, use in conjunction with LRT-12-119.
New tool part number: 303-922.
BMW tool number: 13-5-062
Overall length: 18cm (7.1")

Price: 52.94 (63.53 Including VAT at 20%)





Related products:
1. Injector Pump Remover - BMW (Ref: LRT-12-119)
Injection Pump Adjuster
Injector Pump Remover - BMW Ref: LRT-12-119
Application: Range Rover 38A (1994- 2001) fitted with BMW 2.5 diesel engine.

Description: Tool to remove fuel injection pump from BMW diesel engine. It also holds drive gear for pump in position until pump is replaced.

BMW tool number: 13-5-120

Price: 110.18 (132.22 Including VAT at 20%)





Related products:
1. Injection Pump Adjuster (Ref: LRT-12-118)
Injector Pump Remover - BMW
Socket Injector Nozzle BMW Ref: LRT-12-120
Application: Range Rover 2nd Generation (38A) with 6cylinder diesel 2.5 litre.
Description: 1/2" drive socket for the removal of injector nozzles.
New tool number: 303-924

Price: 73.62 (88.34 Including VAT at 20%)



Socket Injector Nozzle BMW
Injection Pump Timing Guage Holder Ref: LRT-12-121
Application: Range Rover 38A 1995 to 2001 fitted with BMW diesel engine.
Description: To fit timing gauge onto fuel injector pump.
BMW tool number: 13-5-330

Price: 69.87 (83.84 Including VAT at 20%)



Injection Pump Timing Guage Holder
Speed Sensor Mandrel Ref: LRT-12-122
Application:: Range Rover 38A 1995 to 2001 when fitted with BMW 2.5 litre diesel engine.
Description: Mandrel for aligning the crankshaft speed sensor.
BMW tool number: 13-6-020

Price: 30.41 (36.49 Including VAT at 20%)



Speed Sensor Mandrel
Page:  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -