Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5   >   >>
Sleeve for 'O' Ring Fitting Ref: LRT-12-154/2
Application: Defender and Discovery 2 where fitted with TD5 engine.
Description: Sleeve to guide 'O' rings into groove on injectors.
Approximate dimensions: Overall length 10cm (4"), overall diameter 29.5mm (1.16").

Price: 36.98 (44.38 Including VAT at 20%)



Sleeve for 'O' Ring Fitting
Insertion Tool for Injector Washer Ref: LRT-12-154/3
Application: Defender and Discovery 2 where fitted with TD5 engine.
Description: Tool for correct insertion of injector sealing washer.
Approximate dimensions: Length 25mm (1"), overall diameter 25mm (1").

Price: 13.85 (16.62 Including VAT at 20%)



Insertion Tool for Injector Washer
Removal Tool for Injector Washers on TD5 Ref: LRT-12-154-4
Application: Defender 2002 on fitted TD5 engine, Discovery II 2002 on fitted with TD5 engine.
Description: Removal tool for injector washers.

Price: 82.25 (98.70 Including VAT at 20%)



Removal Tool for Injector Washers on TD5
Installer Front Crankshaft Seal Ref: LRT-12-156
Application: Discovery 2 and Defender with TD5 engine.
Description: Tool for installing front crank seal to correct depth.
New tool number: 303-959

Price: 40.52 (48.62 Including VAT at 20%)



Installer Front Crankshaft Seal
Crank Timing Pin for TD5 Ref: LRT-12-158
Application: TD5 engine fitted to Defender and Discovery 2.
Description: Tool for locking crankshaft whilst working on valve train.
Overall length approximately 11.4cm.

Price: 30.82 (36.98 Including VAT at 20%)



Crank Timing Pin for TD5
Wrench for Locking Crank Pulley Ref: LRT-12-161
Application: Freelander with KV6 2.5 litre V8 engine.
Description: Wrench to lock/hold crankshaft pulley during timing operations. Used with LRT-12-199 extention handle.
Approximate dimensions: Length 21.5cm (8.46"), hexagonal 69mm (2.72").

Price: 105.02 (126.02 Including VAT at 20%)





Related products:
1. Handle for Crank Pulley Wrench (Ref: LRT-12-199)
Wrench for Locking Crank Pulley
Wrench Belt Tensioner TD4 Ref: LRT-12-163
Application: Freelander 1 from 2001 with TD4 engine.
Description: Long armed wrench for tensioning drive belt.
Approximate dimensions: overall length 58cm (22.8").

Price: 70.50 (84.60 Including VAT at 20%)



Wrench Belt Tensioner TD4
Pair of Locking Pins Ref: LRT-12-172
Application: TD4 diesel engine in Freelander, TD6 diesel engine in Range Rover Generation 3.
Description: Pair of locking pins to lock timing chain tensioner. Used in conjunction with LRT-12-108 and LRT-12-115
Overall length 11cm.

Price: 16.42 (19.70 Including VAT at 20%)





Related products:
1. Crank Timing Pin BMW (Ref: LRT-12-108)
2. Timing Chain Tensioner Release (Ref: LRT-12-115)
Pair of Locking Pins
Camshaft Locking Tool TD4 Ref: LRT-12-173
Application: Freelander 1 from 2001 fitted with TD4 engine.
Description: Locking tool for camshaft for timing purposes.
Approximate dimensions: overall length 170mm (6.7"), height 92mm (3.6"), thickness 10mm (0.375").

Price: 173.39 (208.07 Including VAT at 20%)



Camshaft Locking Tool TD4
Camshaft Holding Tool TD4 Ref: LRT-12-174
Application: Freelander 1 from 2001 fitted with TD4 engine.
Description: Camshaft holding tool for timing and rebuilding purposes.

Price: 102.31 (122.77 Including VAT at 20%)



Camshaft Holding Tool TD4
Page:   <<   <  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -