Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Suspension Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>
U Bolt for Front Springs Ref: 562637
Application: Front springs on Series 2A and Series 3 short wheel base models.

Description: Replacement U bolt threaded 7/16"BSF.

Approximate dimensions: Overall height 17.6cm(7"), leg centre 86.6mm(3.4")

Price: 1.50 (1.80 Including VAT at 20%)





Related products:
1. Pack of 10 7/16" BSF Nyloc Nuts (Ref: 251323x10)
U Bolt for Front Springs
U Bolt for Rear Spring Ref: 592183
Application: 109 1Ton models.

Description: Reproduction 'U' bolt for rear springs. Threaded M12 x 1.75pitch.

Approximate dimensions: Overall length 21cm(8.3"), leg centres 91mm(3.6").

Price: 1.80 (2.16 Including VAT at 20%)





Related products:
1. M12 Nyloc Nuts - bag of 10 (Ref: NY112041Lx10)
U Bolt for Rear Spring
Front Shock Absorber Ref: RTC4230D
Application: Series 1 1954 onwards, Series 2 and 3 short wheel base models.
Description: Replacement front shock absorber by Armstrong.
Approximate dimensions: Overall length closed 31.2cm(12.3"), overall length open 45.7cm(18").
Original part number 501444

Price: 12.95 (15.54 Including VAT at 20%)




People who bought this item also bought:
1. Washer Shock Absorber Bush (Ref: RYF500160)
2. Rear Shock Absorber (Ref: RTC4232D)
3. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Front Shock Absorber
Rear Shock Absorber Ref: RTC4232D
Application: Series 1 1954 onwards, Series 2 and 3 short wheel base models.
Description: Replacement rear shock absorber by Armstrong.
Approximate dimensions: Overall length closed 36.2cm(14.3"), overall length open 55.5cm(21.9").
Original part number 501445

Price: 13.95 (16.74 Including VAT at 20%)




People who bought this item also bought:
1. Washer Shock Absorber Bush (Ref: RYF500160)
2. Front Shock Absorber (Ref: RTC4230D)
3. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Rear Shock Absorber
Rear Shock Absorber Ref: RTC4442D
Application: Series 2A and Series 3 109"(LWB) models.

Description: Armstrong boxed rear shock absorber with eye mounting at top and spigot at bottom. Supplied with bushes for top, and bushes, washers and nut for bottom.

Approximate dimensions: Overall length fully open 52.6cm(20.7"), overall length fully closed 36.2cm(14.3"), tube diameter 56mm(2.2").

Old part numbers: GSA200, 276937

Price: 14.00 (16.80 Including VAT at 20%)



Rear Shock Absorber
Bush for Shock Absorber Ref: 552818
Application: Series 1 (LWB only!), Series 2/2A, Series 3, Defender, Discovery 1 and Range Rover Classic.

Description: Original Equipment specification shock absorber bush. This bush is used on spigot type fixings.

Approximate dimensions: Outside diameter 32mm(1.25"), inside diameter 14mm(0.55"), thickness 18.7mm(0.75").

Price: 1.15 (1.38 Including VAT at 20%)



Bush for Shock Absorber
Replacement Bush for Shock Absorber Ref: 552818D
Application: Series 1 (LWB only!), Series 2/2A, Series 3, Defender, Discovery 1 and Range Rover Classic.

Description: Replacement shock absorber bush - softer than OE version. This bush is used on spigot type fixings.

Approximate dimensions: Outside diameter 32mm(1.25"), inside diameter 14mm(0.55"), thickness 18.7mm(0.75").

Price: 0.45 (0.54 Including VAT at 20%)



Replacement Bush for Shock Absorber
Bush for Shock Absorber Ref: 552819
Application: Series 1 1954 - 1958, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar linkage.

Description: Original Equipment shock absorber bush. For eye ended shockers.

Approximate dimensions: outside diameter at widest 36.5mm(1.4"), inside diameter 19mm(0.75"), length 22mm(0.9")

Old part number: 243057

Price: 0.80 (0.96 Including VAT at 20%)




People who bought this item also bought:
1. Retainer and Fixings for Hi/Lo Gaiter (Ref: 303817KIT)
2. Spring High/Low Selector Shaft (Ref: 217445)
3. Blanking Gommet for Bell Housing (Ref: 232604)
Bush for Shock Absorber
Bush for Shock Absorber Ref: 552819D
Application: Series 1 1954 - 1958, Series 2 and Series 3. Defender, Discovery 1 and Range Rover Classic anti-roll bar linkage.

Description: Replacement shock absorber bush. For eye ended shockers. Softer material than the O E version.

Approximate dimensions: outside diameter at widest 36.5mm(1.4"), inside diameter 19mm(0.75"), length 22mm(0.9")

Old part number: 243057

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Washer Shock Absorber Bush (Ref: RYF500160)
2. Split Pin - Shocker Retention (Ref: 4063A)
Bush for Shock Absorber
Washer Shock Absorber Bush Ref: RYF500160
Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Split Pin - Shocker Retention (Ref: 4063A)
2. Engine Mount Front (Ref: NRC2054)
3. Washer for Drain Plug (Ref: 515599)
Washer Shock Absorber Bush
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Suspension Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Door Mirror Right Hand

Door Mirror Right Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -