Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Suspension Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>
Shackle Plate 109 1Ton Front Ref: 90577718A
Application: Standard fit to 109 1Ton, optional fit to other models where larger wheels fitted or additional ground clearance required.

Description: Replacement outer shackle plate. Top and bottom holes drilled 9/16"(14.3mm). Middle hole drilled 13.4mm(0.53").

Approximate dimensions: Overall length 178mm(7"), width 40.5mm(1.6"), thickness 10.6mm(0.42").

Price: 7.10 (8.52 Including VAT at 20%)



Shackle Plate 109 1Ton Front
Shackle Plate 109 Rear Ref: 279970
Application: Series 2A and Series 3 109"(LWB) models.

Description: Replacement outer shackle plate with plain holes.

Approximate dimensions: Overall length 13.8cm(5.4"), hole centres 10.3cm(4 1/16").

Price: 2.00 (2.40 Including VAT at 20%)



Shackle Plate 109 Rear
Shackle Plate 109 1Ton Rear Ref: 537734D
Application: Standard fit to 109 1Ton, optional fit to other models where larger wheels fitted or additional ground clearance required.

Description: Replacement inner shackle plate with threaded holes. Top and bottom holes threaded 9/16"UNF. Middle hole drilled 13.2mm(0.52").

Approximate dimensions: Overall length 165mm(6.5"), width 38mm(1.5"), thickness 10.2mm(0.4")

Price: 5.13 (6.16 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Suspension Bush (Ref: 569746D)
2. Repacement Spring Bush for 2.5" wide Springs (Ref: 548205D)
3. Spring Bush for 2.5" wide Springs (Ref: 548205)
Shackle Plate 109 1Ton Rear
Shackle Plate 109 1Ton Rear Ref: 537778D
Application: Standard fit to 109 1Ton, optional fit to other models where larger wheels fitted or additional ground clearance required.

Description: Replacement outer shackle plate with plain holes. Top and bottom holes drilled 9/16"(14.3mm). Middle hole drilled 13.4mm(0.53").

Approximate dimensions: Overall length 165mm(6.5"), width 38mm(1.5"), thickness 10.2mm(0.4")

Price: 5.13 (6.16 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Suspension Bush (Ref: 569746D)
2. Repacement Spring Bush for 2.5" wide Springs (Ref: 548205D)
3. Spring Bush for 2.5" wide Springs (Ref: 548205)
Shackle Plate 109 1Ton Rear
Spring Dowel Bolt Ref: 243129
Application: Series 1 1954-1958, Series 2 and Series 3 front springs.
Description: Centre bolt of front spring. Holds spring together and locates spring on axle.
Approximate dimensions: 5/16" BSF thread, spindle is 1 15/16" long (49mm), head is 1/2"(12.5mm) diameter and 3/8" (9.5mm) long.

Price: 2.90 (3.48 Including VAT at 20%)




People who bought this item also bought:
1. Pack of 10 5/16" BSF Plain Nuts (Ref: 2828x10)
2. Replacement Suspnsion Bush (Ref: 90577434D)
3. Replacement Suspension Bush (Ref: 569746D)
Spring Dowel Bolt
Rear Spring Dowel Bolt Ref: 243130
Application: Series 1 1954 to 1958, Series 2 & 3 short wheel base models.
Description: Centre bolt for rear spring. Holds spring together and locates spring to axle,
Approximate dimensions: Shank is 69mm(2.75") long with 38/" BSF thread on end, head is 5/8"(15.9mm) diameter and 3/8"(9.5mm) high.

Price: 0.90 (1.08 Including VAT at 20%)




People who bought this item also bought:
1. U Bolt for Front Spring (Ref: 543108)
2. Pack of 10 5/16" BSF Plain Nuts (Ref: 2828x10)
3. Pack of 10 7/16" BSF Nyloc Nuts (Ref: 251323x10)
Rear Spring Dowel Bolt
Second Leaf for Front Spring Ref: 243126
Application: Series 1 1954 to 1958, Series 2 & 3.
Description: 2nd leaf for front springs. Why replace the whole spring when just one leaf has broken?
Approximate dimensions: overal length 90cm(35"), width 6.4cm(2.5")

Price: 20.30 (24.36 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Suspnsion Bush (Ref: 90577434D)
2. Replacement Suspension Bush (Ref: 569746D)
3. Spring Bush for 2.5" wide Springs (Ref: 548205)
Second Leaf for Front Spring
Locker for Spring U Bolts Ref: 234734
Application: Series One 1952 to 1958, Series Two.
Description: Locker plate for road spring 'U' bolts. These are for the later 2.5" wide springs.
Approximate dimensions: Hole centre to hole centre 3 1/16"( 77.8mm), hole diameter 7/16" (11.5mm)

Price: 4.30 (5.16 Including VAT at 20%)




People who bought this item also bought:
1. Split Pin - Shocker Retention (Ref: 4063A)
2. Spring High/Low Selector Shaft (Ref: 217445)
3. Blanking Gommet for Bell Housing (Ref: 232604)
Locker for Spring U Bolts
U Bolt for Front Spring Ref: 543108
Application: Series 2A and Series 3.

Description: Replacement U bolt for front springs. Threaded 7/16"BSF.

Approximate dimensions: Overall length 18.5cm(7.3"), bar diameter 10.2mm(0.4")

Price: 1.50 (1.80 Including VAT at 20%)




People who bought this item also bought:
1. Pack of 10 5/16" BSF Plain Nuts (Ref: 2828x10)
2. Pack of 10 7/16" BSF Nyloc Nuts (Ref: 251323x10)
3. Pack of 10 3/8"BSF Nyloc Nuts (Ref: 251322x10)


Related products:
1. Pack of 10 7/16" BSF Nyloc Nuts (Ref: 251323x10)
U Bolt for Front Spring
U Bolt for Front Springs Ref: 569028A
Application: Series 2A and Series 3.

Description: Replacement U bolt for front springs. Threaded 7/16"BSF.

Approximate dimensions: Overall length 19.1cm(7.5"), bar diameter 10.2mm(0.4")

Price: 1.50 (1.80 Including VAT at 20%)





Related products:
1. Pack of 10 7/16" BSF Nyloc Nuts (Ref: 251323x10)
U Bolt for Front Springs
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Suspension Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Door Mirror Right Hand

Door Mirror Right Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -