Dingocroft Other tools

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Special Tools for Land Rover > Churchill Tools > Other tools

Remover Fuel Pump and Sender Units Ref: LRT-19-001
Application: Plastic fuel tanks on Range Rover Classic, Range Rover 2, Discovery 1, Discovery2 and Defender.
Description: Wrench for removing plastic retaining ring on plastic fuel tanks.
Old tool number: LST.131
New tool number: 310-112
Approximate dimensions: overall diameter 16cm (6.3"), height 13cm (5.1")
Price: £72.28 (£86.74 Including VAT at 20%)

Fuel Pressure Guage Ref: LRT-19-004A
Application: Pretty much universal.
Description: Fuel pressure guage reading to 4 bar (60psi). Supplied with hoses and 'T' piece to allow connection to fuel line.
Price: £92.95 (£111.54 Including VAT at 20%)

Wrench, Fuel Tank Sender/Pump Unit Ref: LRT-19-009
Application: Defender TD5, Discovery 2, Freelander 1 and Range Rover 38A
Description: Wrench for removing the fuel tank sender/pump unit. On these models the sender unit (which incorporates fuel pump in most cases) is retained by a large plastic threaded ring. This is difficult to remove without damage unless this tool is used.
Price: £120.23 (£144.28 Including VAT at 20%)

Replacer Pinion Oil Seal on Rover Type Diffs Ref: LRT-51-001
Application: Ser2A, Ser3, Range Rover Classic, Defender and Discovery.
Description: Pinion oilseal installer for use on Rover type differentials. Allows seals to be fitted square and to the correct depth.
Old part number: LST.106
Price: £49.71 (£59.65 Including VAT at 20%)

Replacer Pinion Oil Seal - Salisbury Axles Ref: LRT-51-002
Application: Salisbury axles on Series 3 and Defender.
Description: Pinion oilseal installer for use on Salisbury type differentials. Allows seals to be fitted square and to the correct depth.
Approximate dimensions: length 86mm (3.4"), overall diameter 78mm (3.1").
Old part number: RO1008A
Price: £67.67 (£81.20 Including VAT at 20%)

Adjustable Flange Holding Tool Ref: LRT-51-003
Description: Tool for holding the input flange of differentials. This facilitates the removal of the flange retaining nut or bolt.
Application: All models.
Old tool part number: 18G.1205.
Approximate dimensions: overall length 55.5cm.
Price: £124.10 (£148.92 Including VAT at 20%)

Remover for the Differential Flange Centraliser Ref: LRT-51-008
Description: The tool to remove the centraliser in the rear differential propshaft drive flange. Those fitted with the rubber doughnut joint.
Application: Discovery I from approx 1994 to 1999.
Price: £144.80 (£173.76 Including VAT at 20%)

Replacer Pinion Oil Seal Ref: LRT-51-009
Application: Defender 90 rear axle with 4 pin diff carrier, Range Rover 38A 1995 to 2002 both diffs.
Description: Tool for replacing the pinion oil seal on differentials. The tool fits the seal square and to the correct depth.
Approximate dimensions: length 106mm (4.2"), overall diameter 90mm (3.54").
Price: £39.06 (£46.87 Including VAT at 20%)

Height Guage Rear Differential Ref: LRT-51-018/1
Application: Defender Rear Differential approx 2003 onwards.
Description: Pinion bearing height setting tool. Use with LRT-51-018/7.
New tool number: 205-696

Price: £238.48 (£286.18 Including VAT at 20%)

Mounting Bridge Ref: LRT-51-018/7
Application: Defender rear axle from 2002 onwards.
Description: Mounting bridge for pinion height guage. Use with LRT-51-018/1.
New tool number: 205-702
Price: £241.85 (£290.22 Including VAT at 20%)

Related products:

1. Height Guage Rear Differential (Ref: LRT-51-018/1)

Adaptor for the Removal of Pinion Bearing Cone Ref: LRT-51-500
Application: Salisbury axles as fitted to Series 2A, Series 3 and Defender models.
Description: Adaptor for the removal of the pinion bearing cone on Salisbury axles. Used in conjunction with Special Tool LRT-99-002.
Old part number: 18G.47BK
Price: £122.15 (£146.58 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Differential Case Compressor Ref: LRT-51-503
Application: Salisbury axles on Series 3 and Defender. (Also aplicable to some Jaguar models!!)
Description: Tool for compressing the Salisbury axle casing in the vertical plane. This allows the differential to be removed.
This tool does the same job as the earlier spreader and pins referred to in some workshop manuals.
Old parrt numbers: 18G131c, 18G131F & GKN131
Price: £286.53 (£343.84 Including VAT at 20%)

Adaptor for Replacement of Hub Oil Seals Ref: LRT-54-001
Application: Range Rover Classic, Defender and Discovery 1.
Description: Adaptor for use with LRT-99-003, to set hub oil seals squarely to the correct depth.
Old tool number: LST550-5
Price: £40.35 (£48.42 Including VAT at 20%)

Related products:

1. Replacer Bearings and Oilseals - Main Tool (Ref: LRT-99-003)

Hub nut box spanner (not Churchill's) Ref: LRT-54-002
Application: Series I-III, Defender, Discovery I and Range Rover Classic.
Description: Hub adjustment wrench. NB this is not a Churchill tool
Old part number: RO.606435A

Price: £10.17 (£12.20 Including VAT at 20%)

Installer Hub Oil Seal Ref: LRT-54-003
Application: Range Rover Classic 1986 on including early models with ABS.
Description: Hub oilseal installer. Allows seals to be fitted square and to the correct depth.
Weight: 0.858kg

Price: £45.18 (£54.22 Including VAT at 20%)

Remover/Installer Knuckle Ball Joints Ref: LRT-54-008B
Application: Discovery 2 and Range Rover 2 (38A).
Description: Hydraulic hand press and set of mandrils for removing and installing the suspension knuckle ball joints on these models.
New tool number: 205-719
Price: £833.04 (£999.65 Including VAT at 20%)

Replacer Upper Ball Joint Ref: LRT-54-021
Application: Discovery 2.
Description: Tool for replacing upper swivel ball joint on front axle. Use in conjunction with LRT-54-008-M/
New tool number: 205-732
Price: £99.84 (£119.81 Including VAT at 20%)

Ball Joint bSplitter Ref: LRT-54-027
Application: Discovery 2, Discovery 3, Range Rover 3, Range Rover Sport and vFreelander 2.
Description: Large Capacity ball joint splitter for suspension and steering ball joints.
New part number: 205-754A
Price: £282.97 (£339.56 Including VAT at 20%)

Hub oil seal Replacer Ref: LRT-54-501
Application: Ser2A, Ser3, Range Rover Classic, Defender.
Description: Hub oilseal replacer for vehicles up to 1985. Allows seals to be fitted square and to the correct depth.
Weight: 0.80kg
Old part number: 18G1349

Price: £42.10 (£50.52 Including VAT at 20%)

Pinion Head Bearing Remover/Replacer Ref: LRT-54-502
Application: Rover type differentials on Series vehicles, Classic Range Rover, Discovery 1 and Defender.
Description: Used with hand press ZZLRT-99-002 to remove and replace the pinion head bearing.
Old tool number: 18G47-6
Price: £119.22 (£143.06 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Pinion Height Gauge Ref: LRT-54-503
Application: Rover and Salisbury type differentials. So most models except very latest and Freelander 1.
Description: Pinion height setting tool with steps of 30.93mm, 38.10mm and 39.50mm. Used in conjunction with dial gauge.
Old tool number: 18G191-4
New tool number: 205-743
Price: £79.16 (£94.99 Including VAT at 20%)

Extractor Pinion Bearing Cup Ref: LRT-54-505
Application: All models using Rover type differentials, ie Series 1, 2, 2A, 3, Classic Range Rover, Defender and Discovery 1.
Description: Main tool for extracting pinion bearing cups from differential housings. Used in conjunction with LRT-54-506 and LRT-54-507.
Old part number: RO.262757A
Price: £113.51 (£136.21 Including VAT at 20%)

Related products:

1. Adaptor for Pinion Head Bearing Cup (Ref: LRT-54-506)

2. Adaptor for Pinion Tail Bearing Cup (Ref: LRT-54-507)

Adaptor for Pinion Head Bearing Cup Ref: LRT-54-506
Application: All models using Rover type differentials, ie Series 1, 2, 2A, 3, Classic Range Rover, Defender and Discovery 1.
Description: Adaptor for extracting pinion head bearing cup from differential housings. Used in conjunction with LRT-54-505.
Old part number: RO.262757-1.
Approximate dimensions: Overall diameter 81mm (3.19"), thickness 20mm (0.79").
Price: £40.70 (£48.84 Including VAT at 20%)

Related products:

1. Extractor Pinion Bearing Cup (Ref: LRT-54-505)

Adaptor for Pinion Tail Bearing Cup Ref: LRT-54-507
Application: All models using Rover type differentials, ie Series 1, 2, 2A, 3, Classic Range Rover, Defender and Discovery 1.
Description: Adaptor for extracting pinion tail bearing cup from differential housings. Used in conjunction with LRT-54-505.
Old part number: RO.262757-2.
Approximate dimensions: Overall diameter 66mm (2.6"), thickness 10mm (0.375").
Price: £41.67 (£50.00 Including VAT at 20%)

Related products:

1. Extractor Pinion Bearing Cup (Ref: LRT-54-505)

Adjusting Screw Tool for Steering Box Ref: LRT-57-006
Application: Adwest and Gemmer power steering boxes as fitted to Defender, Range Rover Classic and Discovery 1.
Description: Adaptor to allow easy adjustment on these steering boxes. Takes 1/2" drive socketry.
Approximate dimensions: 41mm (1.61") hexagon across flats, 30mm (1.18") high.
Old part number: LST119A
Price: £98.88 (£118.66 Including VAT at 20%)

'C' Spanner for Steering Box Ref: LRT-57-007
Application: Defender, Range Rover Classic and Discovery 1 when fitted with Adwest power steering box.
Description: 'C' wrench (or spanner) for adjusting the lock nut on these sterring boxes.
Old part number: LST120
Approximate dimensions: overall length 233mm (9.2"), pin centres 75mm (2.95").
Price: £62.87 (£75.44 Including VAT at 20%)

Torque Setting Tool for Steering Box Ref: LRT-57-017
Application: Adwest and Gemmer power and manual steering boxes as fitted to Defender, Range Rover Classic and Discovery 1.
Description: Tool to allow correct torque setting of the above steering boxes.
Old Part number: RO1016
Approximate dimensions: overall diameter 63.5mm (2.5"), internal diameter 19mm (0.75"), height 25mm (1.0")
Price: £31.83 (£38.20 Including VAT at 20%)

Ring Expander for Seals Ref: LRT-57-019
Application: Adwest and Gemmer power steering boxes as fitted to Range Rover Classic, Discovery 1 and Defender.
Description: Ring expander for steering box valve and worm seals.
Approximate dimensions: Length 104mm (4.1"), diameter 37.8mm (1.49")
Old part number: RO.606602
Price: £43.77 (£52.52 Including VAT at 20%)

Power Steering Test Hose Ref: LRT-57-030
Application: Discovery 1, Range Rover Classic and Defender.
Description: Pressure test hose for power steering. Used with LRT-57-005 gauge unit.
New tool number: 211-308
Price: £177.00 (£212.40 Including VAT at 20%)

Camber Setting Tool Ref: LRT-57-045
Application: Range Rover Generation 3, 2002 onwards.
Description: Camber setting tool.
New tool number: 211-318.
Price: £76.57 (£91.88 Including VAT at 20%)

Puller for Steering Drop Arm Ref: LRT-57-500
Application: Series 2, 2A and 3.
Description: Puller for the removal of the drop arm from the main steering box.
Old part number: RO.600000.
Approximate dimensions: Jaw width 60mm (2.36"), overall width 91mm (3.6"), height excluding bolt 70mm (2.76"),
thickness 24mm (0.95").
Price: £143.46 (£172.15 Including VAT at 20%)

Height Guage Set Range Rover Ref: LRT-60-003
Application: Range Rover 38A (2nd Generation) 1995 to 2000)
Description: Suspension height guage set, comprising 4 short blocks and 4 tall blocks in black plastic carry case.
Approximate dimensions: Overall diameterof each guage 50mm (2"), short block height 70mm (2.76"), tall block height 136mm (5.35")
Price: £205.63 (£246.76 Including VAT at 20%)

Remover/Replacer Radius Arm Bush Ref: LRT-60-004
Description: Tool for the removal and replacement of radius arm bushes. Probably for use with a hydraulic press.
Application: Range Rover 2nd Generation (38A) 1995 to 2002.
Price: £119.83 (£143.80 Including VAT at 20%)

Remover/Installer Radius Arm Bushes Ref: LRT-60-011
Application: Discovery 2.
Description: 3 part kit of tools for removing and installing radius arm to chassis bushes. Works on both front and rear radius arms. Tools used in conjunction with a press.
New tool number: 204-502.
Price: £161.22 (£193.46 Including VAT at 20%)

Replacer/Remover Upper Arm Bushes Ref: LRT-64-024
Application: Range Rover Generation 3, 2002 onwards.
Description: Tools for removing and replacing the upper arm bushes on the rear suspension.
Price: £170.81 (£204.97 Including VAT at 20%)

Remover/Replacer Hub Bush Upper Ref: LRT-64-025
Application: Range Rover Generation 3, 2002 onwards.
Description: Tools for removing and replacing the upper hub bush on the rear suspension.
Price: £115.77 (£138.92 Including VAT at 20%)

Remover/Installer Hub Bush Lower Ref: LRT-64-026
Application: Range Rover 3 (L322), Range Rover Sport and Discovery 3.
Description: Tool for removing and replacing lower hub bushes. Also used in conjunction with tool 204-530 to remove/install suspension ball joints on Range Rover Sport and Discovery3.
New tool number: 204-516
Price: £140.27 (£168.32 Including VAT at 20%)

Compressor for Caliper Pistons Ref: LRT-70-500
Application: Range Rover Classic, Defender and Discovery 1.
Description: Tool for pushing pistons back into brake caliper and also for fitting piston seals and retainers.
Old part number: 18G.672
Price: £144.68 (£173.62 Including VAT at 20%)

Key for Alpine Radio Removal Ref: LRT-86-006
Application: Range Rover 38A (2nd generation) and other models where 'Alpine' brand radios are fitted.
Description: Single key for radio removal, but TWO keys are needed to remove radio.
Approximate dimensions: overall length 98mm.
Price: £19.26 (£23.11 Including VAT at 20%)

Hand Press Ref: LRT-99-002
Application: Universal tool, used in conjunction with many tools in all areas of the vehicles.
Description: Hand press.
Approximate dimensions: Overall height 54cm (21.3"), maximum opening 15cm (5.9"), between pillars 14.5cm (5.7")
Price: £514.99 (£617.99 Including VAT at 20%)

Replacer Bearings and Oilseals - Main Tool Ref: LRT-99-003
Application: Universal.
Description: Main tool for replacing bearings and oil seals, used with various adaptors for specific tasks.
Old tool number: 18G134
Price: £37.50 (£45.00 Including VAT at 20%)

Impuse Extractor (Slide Hammer) - Main Tool Ref: LRT-99-004
Application: General purpose tool, used in conjunction with various other tools where impulse extraction is needed.
Description: Hefty slide hammer weighing 3.5kg. End collars threaded 5/8"UNF and 7/8"UNF. Overall length 40cm (15.75").
Price: £80.75 (£96.90 Including VAT at 20%)

Puller for Locking Wheelnut Caps Ref: LRT-99-018
Application: Defender, Discovery 1 and Range Rover Classic with alloy wheels.
Description: Tool for removing the cap over locking wheel nuts on alloy wheels. This is a steel version of the plastic remover supplied as standard equipment. This version should survive considerably longer than the plastic one.
New tool number: 100-049.
Approximate dimensions: overall length 10cm (4"), diameter 42mm (1.65").
Price: £79.40 (£95.28 Including VAT at 20%)

Bracket for Dial Guage Ref: LRT-99-503
Application: Universal.
Description: Bracket for mounting dial guage (clock guage), used in many applications across most models.
New tool number: 100-053
Price: £110.85 (£133.02 Including VAT at 20%)

Related products:

1. Metric Dial Guage (Ref: ZZDG25M)

Digital Dispensary > Special Tools for Land Rover > Churchill Tools > Other tools

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO