Terms & Conditions

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

TERMS AND CONDITIONS OF TRADING.

(The small print)

MAIL ORDER SALES

Whilst we will do our utmost to keep to promised delivery times they are to be treated as estimates only. We cannot guarantee same day dispatch but goods will be dispatched at the earliest opportunity. The company accepts no responsibility for loss or damage resulting from delay in delivery of goods.
Every effort is made to supply parts correctly; it is the customer's responsibility to check that parts are correct prior to fitting or carrying out preparatory work to the parts. It is our policy to accept returned parts for credit or exchange, incorrectly supplied or otherwise, provided they are returned undamaged and in the case of body parts unpainted. And in the same condition as sold. They must be returned in their original packaging and fit for re-sale. If obtained on special order they may only be returned by prior agreement – if accepted a handling charge of up to 50% may be levied.
We will replace or credit the purchaser with the value of any defective goods supplied by the Company. The Company will only do this if it is satisfied such defects arose solely through faulty material or workmanship in manufacture, and such goods are returned immediately upon discovery of the defect. We will normally not consider any claims made after 6 months from the date of supply. The Company will accept no liability for any consequential loss or damage.
We offer a free delivery service within 20 miles of our premises provided the order exceeds £25.00
All goods must be paid for prior to delivery.
Payment by credit card is accepted providing the order exceeds £10.00.
If you wish to pay by cheque, goods will not be despatched until the cheque has cleared. A cheque can take up to 10 days to clear.
A charge of £6.00 will be levied each time a cheque is returned unpaid by the bank.

VAN DELIVERY SALES

Whilst we will do our utmost to keep to promised delivery times they are to be treated as estimates only. We cannot guarantee same day delivery on orders place after 9.30 am, however, we will still deliver on the same day on later orders where and when we can. The company accepts no responsibility for loss or damage resulting from delay in delivery of goods.
Every effort is made to supply parts correctly; it is the customer's responsibility to check that parts are correct prior to fitting or carrying out preparatory work to the parts. It is our policy to accept returned parts for credit or exchange, incorrectly supplied or otherwise, provided they are returned undamaged and in the case of body parts unpainted. And in the same condition as sold. They must be returned in their original packaging and fit for re-sale. If obtained on special order they may only be returned by prior agreement – if accepted a handling charge of up to 50% may be levied.
We will replace or credit the purchaser with the value of any defective goods supplied by the Company. The Company will only do this if it is satisfied such defects arose solely through faulty material or workmanship in manufacture, and such goods are returned immediately upon discovery of the defect. We will normally not consider any claims made after 6 months from the date of supply. The Company will accept no liability for any consequential loss or damage.
We offer a free delivery service within 20 miles of our premises provided the order exceeds £25.00.
All goods must be paid for prior or on delivery. Goods will not be left unless arrangements have been made for payment.
If you wish to pay by business cheque with a value in excess of £100.00 please ask for a Business Cheque / Credit Account application form. A cheque can take up to 10 days to clear.
A charge of £6.00 will be levied each time a cheque is returned unpaid by the bank.
Personal cheques will only be accepted if you have a valid cheque guarantee card. Cheques will not be accepted if they exceed the limit on the card.

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO