Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>
Distributor Cap Ducellier 4 Cylinder Ref: RTC4932D
Application: Ducellier 4cylinder distributor as fitted to Series 3 petrol engines.

Description: Commercial Ignition boxed distributor cap with 'push in' HT leads.

Approximate dimensions: overall diameter 69.5mm (2.74 inches), height 63.5mm (2.5 inches)

Price: 4.20 (5.04 Including VAT at 20%)



Distributor Cap Ducellier 4 Cylinder
Pair of Clips for Distributor Cap Ref: 502287
Application: Lucas 25D 4 cylinder ditributor as used on Series 2, Series 2A and Series 3.

Description: Nicely made reproduction clips for distributor cap. Sold as a pair.

Approximate dimensions: Overall length 77mm(3"), width 9mm(0.35")

Lucas part number: 421824

Price: 10.00 (12.00 Including VAT at 20%)



Pair of Clips for Distributor Cap
Rotor Arm Lucas 25D Ref: RTC3612
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines. Also applicable to the DM2 distributor to Series 1 1954 to 1958.

Description: Reproduction rotor arm.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 16.5mm (0.65 inches)

Lucas part number: 460051

Price: 8.00 (9.60 Including VAT at 20%)



Rotor Arm Lucas 25D
Red Rotor Arm for Lucas 25D Ref: RTC3612R
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines. Also applicable to the DM2 distributor to Series 1 1954 to 1958.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 16.5mm (0.65 inches)

Lucas part number: 460051

Price: 6.00 (7.20 Including VAT at 20%)



Red Rotor Arm for Lucas 25D
Rotor Arm Lucas 45D Ref: RTC3614
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.

Description: Lucas boxed rotor arm.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 20mm (0.79 inches)

Lucas part number: 54422803

Price: 2.20 (2.64 Including VAT at 20%)



Rotor Arm Lucas 45D
Red Rotor Arm for Lucas 45D Ref: RTC3614R
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 20mm (0.79 inches)

Lucas part number: 54422803

Price: 6.00 (7.20 Including VAT at 20%)



Red Rotor Arm for Lucas 45D
Rotor Arm Lucas 6 Cylinder Ref: RTC4542
Application: Series 2A and Series 3, 6 cylinder petrol with Lucas 25D6 distributor and Lucas 45D6.

Description: Replacement rotor arm.

Previous part numbers: GRA102, 262704

Lucas Part number: 418726

Price: 2.00 (2.40 Including VAT at 20%)



Rotor Arm Lucas 6 Cylinder
Red Rotor Arm for 6 cylinder Distributor Ref: RTC4542R
Application: Series 2A and Series 3, 6 cylinder petrol with Lucas 25D6 distributor and Lucas 45D6.

Description: Replacement rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Previous part numbers: GRA102, 262704

Lucas Part number: 418726

Price: 6.00 (7.20 Including VAT at 20%)



Red Rotor Arm for 6 cylinder Distributor
Contact Breakers Lucas 25D Ref: RTC3270
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

Price: 2.50 (3.00 Including VAT at 20%)




People who bought this item also bought:
1. Condensor Ducellier (Ref: RTC6620)
2. Spark Plug Champion N12YC (Ref: RTC3570)
3. Ignition Coil for Series 2A and Series 3 (Ref: PRC9858)


Related products:
1. Low Tension Lead 25D (Ref: 600329)
Contact Breakers Lucas 25D
Contact Breakers Lucas 45D Ref: RTC364
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Contact breaker set (or points) with fixed contacts and red insulator. Supplied with wiper felt.

Price: 2.20 (2.64 Including VAT at 20%)



Contact Breakers Lucas 45D
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -