Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Books and Publications
Series1, 2 & 3 Technical Publications on DVD Ref: ZZLTP3001
Comprehensive contents covering parts books, owners manuals and workshop manuals for Series 1 1948 to 1958, Series 2/2A 1958 to 1971, Series 3 1972 to 1985. Includes military models, 2A and 2B Forward Control models and 109V8.

Product Features
> Printable - print only the pages you need. (Windows only)
> Searchable - search the entire section in seconds.
> Zoom - zoom in to see the exact details.
> Bookmarked - manuals are bookmarked to quickly locate sections.

System Requirements
PC Windows 2000 or later; DVD Reader, PDC viewer; must have administration rights to allow installation.
Mac OS X Mac OS X 10.4 or above. For OS X 10.6 (Snow Leopard) DVD Reader, PDC viewer
Important - Documents are viewable but not printable through Mac OSX. To print using a Mac you must be running a Windows installation e.g. using PC emulation software




Price: 51.66 (61.99 Including VAT at 20%)



Series1, 2 & 3 Technical Publications on DVD
Series 1 Workshop Manual Ref: 4291
Land-Rover 1948-58 Series 1 Workshop Manual.
Brooklands Books reprint of Official Land Rover manual.
This covers both petrol and diesel models up to 1958, with many diagrams, drawings and charts.
Soft back X" x Y", 384 Pages


Price: 27.50



Series 1 Workshop Manual
Parts Catalogue 1948-53 Series 1 Ref: 4051
A Brooklands book reprint of the Official Land Rover parts book.
The parts book is an absolute must for anyone embarking on a rebuild. The exploded diagrams alone more than justify it's purchase.
The manual is in 3 sections; section I 1948-51, section II 1952-53 and section III extra equipment and special vehicles. Each section has it's own numerical index.
Soft back 7.8" x 10.6", 434 pages
Models covered Series I 1948-53

Price: 27.50



Parts Catalogue 1948-53 Series 1
Parts Catalogue 1954-58 Series I Models Ref: 4107
A Brooklands book reprint of the Official Rover Co parts book.
The parts book is an absolute must for anyone embarking on a rebuild. The exploded diagrams alone more than justify it's purchase.
The manual covers standard and optional equipment parts. Includes sections on the Fire Tender and Trailer.
Soft back 7.9" x 10.7", 436 pages
Models covered Series I 1954-58 86, 88, 107 & 109

Price: 27.50



Parts Catalogue 1954-58 Series I Models
Instruction Manual Land-Rover 1948-58 Series I -Petrol Ref: 4277
By the Rover Company Ltd., reprinted by Brookland Books
Instruction manual for all petrol engined Series I's. With General Data, Controls and Instruments, Standard Body Fittings, Routine Maintenance, Fault Finding and Wiring Diagrams.
Soft bound 8.5" x 11", 58 Pages
Models covered Series I

Price: 13.95



Instruction Manual Land-Rover 1948-58 Series I -Petrol
Instruction Manual Land-Rover Series I & II Diesel Ref: 4343
Owners manual published by The Rover Company Ltd. reprinted by Brookland Books.
Instruction manual for Series I and Series II 88 and 109 models fitted with the Rover 2-litre diesel engine. With General Data, Controls and Instruments, Standard Body Fittings, Routine Maintenance, Fault Finding and Wiring Diagrams.
Soft bound 8.5" x 11", 58 Pages
Models covered Series I & Series II

Price: 13.95



Instruction Manual Land-Rover Series I & II Diesel
Series1, 2 & 3 Technical Publications on DVD Ref: ZZLTP3001
Comprehensive contents covering parts books, owners manuals and workshop manuals for Series 1 1948 to 1958, Series 2/2A 1958 to 1971, Series 3 1972 to 1985. Includes military models, 2A and 2B Forward Control models and 109V8.

Product Features
> Printable - print only the pages you need. (Windows only)
> Searchable - search the entire section in seconds.
> Zoom - zoom in to see the exact details.
> Bookmarked - manuals are bookmarked to quickly locate sections.

System Requirements
PC Windows 2000 or later; DVD Reader, PDC viewer; must have administration rights to allow installation.
Mac OS X Mac OS X 10.4 or above. For OS X 10.6 (Snow Leopard) DVD Reader, PDC viewer
Important - Documents are viewable but not printable through Mac OSX. To print using a Mac you must be running a Windows installation e.g. using PC emulation software




Price: 51.66 (61.99 Including VAT at 20%)



Series1, 2 & 3 Technical Publications on DVD
Series 1 Restoration - Practical Classics Ref: ZZBOOKA-LRPC
practical CLASSICS & Car Restorer on
LAND ROVER RESTORATION
Reprinted from Practical Classics magazine. Updated reprint August 2007.
A collection of 19 articles following the rebuilding of 'K for Katie' a 1957 swb series I that features on the front cover. 
Soft back 7.9" x 10.6", 72 Pages.
Models covered: Series I


Price: 12.56



Series 1 Restoration - Practical Classics
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Books and Publications

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -