Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Pack of 10 3/8"BSF Nyloc Nuts

Pack of 10 3/8

1.92

Pack of ten 3/8"BSF nyloc nuts, 19/32"(15mm) across flats, 0.45"(11.5mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Ignition and Engine Electrics
Page:   <<   <  1  2  3   >   >>
Replacement Distributor Cap Series One Ref: 261240D
Application: Series One 1948 to 1953.

Description: The original cap with side exit HT leads has become expensive - see above. This period cap with vertical exit HT leads is a good, functional alternative.
Approximate dimensions: overall diameter 81.5mm(3.2"), height 65mm(2.56")

Price: 27.50 (33.00 Including VAT at 20%)



Replacement Distributor Cap Series One
Distributor Cap Series One Ref: 245004
Application: Series One 1954 to 1958 Lucas 40504A distributor.
Description: Luas distributor cap part number 54412480
Approximate dimensions: overall diameter 77.5mm(3.05"), height 38mm(2.7")

Price: 20.25 (24.30 Including VAT at 20%)




People who bought this item also bought:
1. Red Rotor Arm for Lucas 25D (Ref: RTC3612R)
2. Replacement Condensor for Lucas 25D (Ref: RTC3472)
3. Black High Tension Lead, Copper Cored (Ref: 80603)
Distributor Cap Series One
Rotor Arm Ref: 261242
Application: Series 1 1600petrol with Lucas D3A4 or DVX4A distributor.

Description: Reproduction rotor arm.

Approximate dimensions: Overal length 43.5mm(1.8"), height 17mm(0.66")

Lucas part number: 408355

Price: 11.58 (13.90 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Cover (Ref: ZZSB05F)
2. Head Gasket Set 1600cc (Ref: ZZCB310)
3. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
Rotor Arm
Red Rotor Arm for Lucas 25D Ref: RTC3612R
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines. Also applicable to the DM2 distributor to Series 1 1954 to 1958.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 16.5mm (0.65 inches)

Lucas part number: 460051

Price: 6.00 (7.20 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Condensor for Lucas 25D (Ref: RTC3472)
2. Black High Tension Lead, Copper Cored (Ref: 80603)
3. Distributor Cap Series One (Ref: 245004)
Red Rotor Arm for Lucas 25D
Vacuum Unit - DM2 type Ref: 269989
Application: Series 1 1954 to 1958 with Lucas DM2 distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the DM2 (40504A) distributor.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part numbers: 421943 and 54411727



Price: 58.00 (69.60 Including VAT at 20%)



Vacuum Unit - DM2 type
Acorn for HT Leads Ref: 214278
Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")

Price: 1.24 (1.49 Including VAT at 20%)




People who bought this item also bought:
1. Split Brass Washer (Ref: 214279)
2. Black High Tension Lead, Copper Cored (Ref: 80603)
3. Replacement Condensor for Lucas 25D (Ref: RTC3472)


Related products:
1. Split Brass Washer (Ref: 214279)
Acorn for HT Leads
Split Brass Washer Ref: 214279
Application: Series One and Series Two. 1948 to 1961 approx.
Description: Split brass washer for retaining high tensions leads to distributor caps and plug caps. Use with 217278 acorn nut and copper cored high tension cable.
Approximate dimensions: overall diameter 10mm(0.375")

Price: 0.45 (0.54 Including VAT at 20%)




People who bought this item also bought:
1. Acorn for HT Leads (Ref: 214278)
2. Black High Tension Lead, Copper Cored (Ref: 80603)
3. Replacement Condensor for Lucas 25D (Ref: RTC3472)
Split Brass Washer
Black High Tension Lead, Copper Cored Ref: 80603
Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre

Price: 1.46 (1.75 Including VAT at 20%)




People who bought this item also bought:
1. Acorn for HT Leads (Ref: 214278)
2. Replacement Condensor for Lucas 25D (Ref: RTC3472)
3. Split Brass Washer (Ref: 214279)
Black High Tension Lead, Copper Cored
Ignition Coil Ref: 263732D
Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")

Price: 25.09 (30.11 Including VAT at 20%)



Ignition Coil
Pinion for Starter Motor Ref: 244711
Application: Lucas starter 25533D as fitted to Series 1 petrol 1955-58.
Description: Pinion assembly for starter motor.
Lucas part number 255194

Price: 18.20 (21.84 Including VAT at 20%)



Pinion for Starter Motor
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Ignition and Engine Electrics
Page:   <<   <  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -