Dingocroft Land Rover Series One Ignition and Engine Electrics

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Land Rover Series One Parts > Land Rover Series One Ignition and Engine Electrics

Contact Breakers Lucas 25D Ref: RTC3270
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines.
Description: Lucas boxed contact breaker set also known as 'points'.
Original part number 269987.

Price: £2.50 (£3.00 Including VAT at 20%)

Condensor Lucas 25D Ref: RTC3472
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.
Description: Lucas boxed condensor.
Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).
Original part numbers 269988 & 245007.
Price: £2.23 (£2.68 Including VAT at 20%)

Spark Plug Champion N5C Ref: RTC3571
Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
Price: £1.50 (£1.80 Including VAT at 20%)

Condenser S1 1.6 litre Ref: 260070
Application: Series 1 1600cc engine 1948 to 1953.
Description: Condenser for distributor, equivalent to Lucas 407044
Approximate dimensions: ovelall length 44mm(1.7"), overall diameter 17mm(0.7")
Price: £28.81 (£34.57 Including VAT at 20%)

Contact Breaker Points Set 1.6 Ref: 260073
Application: Series 1 with 1.6 litre petrol engine 1948 to 1953.
Description: Lucas points 407050
Price: £10.95 (£13.14 Including VAT at 20%)

Contact Breaker Points Set Ref: 245006
Application: Lucas 420196 distributor fitted to 2.0ltr engine 1954-1955.
Description: Contact breaker points set for distributor in original Lucas packaging.
Price: £6.77 (£8.12 Including VAT at 20%)

Replacement Distributor Cap Series One Ref: 261240D
Application: Series One 1948 to 1953.
Description: The original cap with side exit HT leads has become very difficult (and expensive) to source. This period cap with vertical exit HT leads is a good, functional alternative.
Approximate dimensions: overall diameter 81.5mm(3.2"), height 65mm(2.56")
Price: £27.50 (£33.00 Including VAT at 20%)

Distributor Cap Series One Ref: 245004
Application: Series One 1954 to 1958 Lucas 40504A distributor.
Description: Luas distributor cap.
Approximate dimensions: overall diameter 77.5mm(3.05"), height 38mm(2.7")
Price: £24.65 (£29.58 Including VAT at 20%)

Acorn for HT Leads Ref: 214278
Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
Price: £1.24 (£1.49 Including VAT at 20%)

Related products:

1. Split Brass Washer (Ref: 214279)

Split Brass Washer Ref: 214279
Application: Series One and Series Two. 1948 to 1961 approx.
Description: Split brass washer for retaining high tensions leads to distributor caps and plug caps. Use with 217278 acorn nut and copper cored high tension cable.
Approximate dimensions: overall diameter 10mm(0.375")
Price: £0.45 (£0.54 Including VAT at 20%)

Pinion for Starter Motor Ref: 244711
Application: Lucas starter 25533D as fitted to Series 1 petrol 1955-58.
Description: Pinion assembly for starter motor.
Lucas part number 255194
Price: £18.20 (£21.84 Including VAT at 20%)

Bush for Starter Ref: 244714
Application: Lucas 25533D starter as fitted to Series 1 petrol engines.
Description: Bush for pinion end of starter.
Approximate dimensions: outside diameter 25.4mm (1"), inside diameter 22.3mm (7/8"), length 33.6mm (1.3").
Lucas part number 270038.
Price: £1.99 (£2.39 Including VAT at 20%)

Sundry Parts Kit - Starter Ref: 244718
Application: Lucas 25533D starter as fitted to Series 1 petrol engines.
Description: Kit of screws, washers etc for rebuilding starter motor.
Lucas part number 256762.
Price: £11.00 (£13.20 Including VAT at 20%)

Bush - Starter Motor Ref: 242958
Application: Lucas 25533D Starter.
Description: Bush for commutator end of armature.
Lucas part number: 255491.
Approximate dimensions: overall length 19mm (0.75"), outside diameter 19mm (0.75"), inside diameter 16mm (5/8").
Price: £0.80 (£0.96 Including VAT at 20%)

Pinion - Starter Motor Ref: RTC4241
Application: Diesel starter motor M45G26147A.
Description: Engegement pinion for starter motor. Comes without clutch plates.
Lucas part number 291875.
Original Land Rover part number 279011.
Price: £15.00 (£18.00 Including VAT at 20%)

Pulley for Dynamo Ref: 272704
Application: C45 dynamo on 2.0litre diesel engines.
Description: Cast iron pulley for dynamo.
Price: £28.00 (£33.60 Including VAT at 20%)

Brush Set for Starter Motor Ref: 270225
Application: Series 1 & 2 with diesel engine.
Description: Set of brushes for Lucas M45G26147A starter motor.
Lucas part number 271735.
Price: £5.69 (£6.83 Including VAT at 20%)

Seal for Solenoid on Starter Ref: 519006
Application: Series 1 & 2, 2.0ltr diesel with Lucas M45G26147A starter.
Description: Seal between end cap and solenoid.
Lucas part number 765842.
Price: £1.45 (£1.74 Including VAT at 20%)

Digital Dispensary > Land Rover Series One Parts > Land Rover Series One Ignition and Engine Electrics

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Rear Brake Cylinder

£7.98

Application: Freelander One to 'YA'.
Description: Original equipment rear brake cylinder for vehicles to approx 2000. These cylinders are not handed.
Approximate dimensions: Casting 4.7cm(1.85") long
find out more

Caliper Seal Kit

£6.29

Application: Freelander One from '1A'.
Description: Replacement seals to service both front calipers on later vehicles with vented discs.
Approximate dimensions: 2 seals with outside diameter of 7cm(2.8"), 2 'O' rings with outside diameter of 6cm(2.4")
find out more

Kit of Brake Caliper Guide Pins

£17.58

Application: Freelander One from '1A'.
Description: Genuine kit of guide pins to service pair of front brake calipers.
Approximate dimensions: 2 pins 5.9cm(2.3") long, 2 pins 7.0cm(2.8") long.
find out more

Front Brake Disc - Vented

£14.03

Application: Freelander One from '1A'.
Description: Replacement vented brake disc for front wheels. Priced as single disc, but strongly recommended to be fitted in pairs.
Approximate dimensions: Overall diameter 27.6cm(10.9"), 2.0cm(0.8") thick, offset 3.2cm(1.3")
find out more

Fixing Clip kit for Front Pads

£2.96

Application: Freelander One from '1A'.
Description: Genuine set of 4 fixing clips for front brake pads on vehicles with vented front discs.
Approximate dimensions: Each clip is 7.5cm(3") long.
find out more

Front Brake Pad Set - Genuine

£42.74

Application: Freelander One from '1A'.
Description: Genuine boxed front brake pad set for later models with vented discs. Supplied with 4 new fixing bolts.
Approximate dimensions: Each pad is 13cm(5.1") long by 5.5cm(2.1") wide.
Original part number: SFP500100.
find out more

Front Brake Pad Set

£20.69

Application: Freelander One from '1A'.
Description: Mintex boxed front brake pad set for later models with vented discs.
Approximate dimensions: Each pad is 13cm(5.1") long by 5.5cm(2.1") wide.
find out more

Brake Disc - non vented

£11.40

Application: Freelander One to 'YA'.
Description: Replacement solid brake disc for front wheels. Priced as single disc, but stronglt recommended to be fitted in pairs.
Approximate dimensions: Overall diameter 26.2cm(10.3"), 1.4cm(0.55") thick, offset 4cm(1.6")
find out more

Front Brake Pad Set

£25.16

Application: Freelander One to YA.
Description: Delphi boxed set of front brake pads for early models with solid discs.
Approximate dimensions: Each pad is 13cm(5.1") long by 6.7cm(2.6") wide.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO