Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Engine Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Copper Ring Water Pump to Thermostat Housing Ref: 9197
Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")

Price: 6.20 (7.44 Including VAT at 20%)




People who bought this item also bought:
1. 'O' Ring for Thermostat (Ref: 527235)
2. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
3. Seal Kit for Brake Master Cylinder (Ref: ZZSP1975-5)


Related products:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
Copper Ring Water Pump to Thermostat Housing
Fan Belt Ref: STC3673
Application: Series 1 with 1.6 litre and 2.0 litre petrol engines.
Description: New type fan belt coggedinner face for better grip.
Approximate dimensions: outer width 19mm(0.75"), depth 11mm(0.4"), length 93cm( 36.6")
Original part number 218576

Price: 19.79 (23.75 Including VAT at 20%)



Fan Belt
'O' Ring for Thermostat Ref: 527235
Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645

Price: 0.46 (0.55 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Thermostat 82 degrees (Ref: 602687)
3. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
'O' Ring for Thermostat
Thermostat 82 degrees Ref: 602687
Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

Price: 8.84 (10.61 Including VAT at 20%)




People who bought this item also bought:
1. 'O' Ring for Thermostat (Ref: 527235)
2. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
3. Timing Chain - AE boxed (Ref: ETC4499)
Thermostat 82 degrees
Clutch Plate 9" Ref: 591704
Application: Series 1, Series 2 and 2A. Where 9" clutch is used.

Description: Nine inch diameter clutch plate by 'Automotive Products' (HB8748). This has a ten spline centre.

Approximate dimensions: overall diameter 230mm.

Previous part number: GCP109

Price: 36.20 (43.44 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Timing Chain - AE boxed (Ref: ETC4499)
3. Gasket Oil Retaining Cap to Block (Ref: 9089)
Clutch Plate 9
Clutch Cover 9" Ref: 591705
Application: Series 1, Series 2 and 2A. Where 9" clutch is used.
Description: Clutch cover plate (pressure plate) for nine inch diameter friction disc. By 'Automotive Productsi' (HA2520).

Currently unavailable - 'tooling broken'

Price: 67.88 (81.46 Including VAT at 20%)


Clutch Cover 9
Bush, Clutch Pedal Lever Ref: 240838
Application: Series 1

Description: Reproduction bronze bush for clutch pedal lever and for left hand drive brake pedal lever.

Approximate dimensions: Overall length 29mm(1.14"), outside diameter 30mm( 1.18"), inside diameter 25.4mm(1").

Price: 13.03 (15.64 Including VAT at 20%)




People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Felt Seal for Series 1 Pedals (Ref: 70621)
3. Grommet Series 1 Pedals (Ref: 70620)
Bush, Clutch Pedal Lever
Gasket Carburetter to Inlet Manifild Ref: 212233
Application: 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Gasket for base of Solex carburetter.

Price: 2.25 (2.70 Including VAT at 20%)



Gasket Carburetter to Inlet Manifild
Gasket Inlet Manifold to Cylinder Head Ref: 9179
Application: 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Gasket for outer legs of inlet manifold, 2 per engine.

Price: 4.65 (5.58 Including VAT at 20%)



Gasket Inlet Manifold to Cylinder Head
Gasket Water Branch to Cylinder Head Ref: 210447
Application: 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Gasket for centre of inlet manifold (the water branch) to cylinder head.

Price: 2.18 (2.62 Including VAT at 20%)



Gasket Water Branch to Cylinder Head
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Engine Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -