Dingocroft Land Rover Series One Engine Parts

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Land Rover Series One Parts > Land Rover Series One Engine Parts

Sump Gasket Series 1 Ref: 267780
Application: Series 1 1600cc or 2000cc petrol (gasolene) engine.
Description: Original cork sump gasket, manufactured in the 1950's.
Price: £4.50 (£5.40 Including VAT at 20%)

Sump Gasket Series 1 - pack of 5 Ref: 267780x5
Application: Series 1 1600cc and 2.0litre petrol engines, alsdo Series 2 2.0Litre engine.
Description: Pack of 5 engine sump gaskets in original military packaging from the 1950's. Packed so well that the gaskets are still in perfect condition.
Price: £12.76 (£15.31 Including VAT at 20%)

Gasket, Cylinder Head 2.0 litre Petrol Ref: 269476
Application: Series 1 2.0 litre petrol 1955 onwards. Series 2 2.0litre petrol.
Description: New reproduction copper composite cylinder head gasket.
Price: £47.13 (£56.56 Including VAT at 20%)

Set of Big End Bearings 2ltr Series1, 0.010" Ref: 523302SET
Application: Series1 2000cc petrol engine.
Description: Engine set of Big End bearing shells (connecting rod to crankshaft), 0.010" undersize (first regrind). Glacier boxed.
Price: £48.00 (£57.60 Including VAT at 20%)

Set of Main Bearings 2ltr Series1, 0.020" Ref: 523308SET
Application: Series 1 fitted with 2000cc petrol (gasolene) engine.
Description: Engine set of Main Bearings (crankshaft main journal bearings) 0.020" undersize. Glacier boxed.
Price: £85.00 (£102.00 Including VAT at 20%)

Set of Big End Bearings 1.6ltr Series 1, 0.020" Ref: ZZB4169/020
Application: Series1 1600cc petrol engine.
Description: Engine set of Big End bearing shells (connecting rod to crankshaft), 0.020" undersize (second regrind). Glacier boxed.
Price: £48.00 (£57.60 Including VAT at 20%)

Set of 4 Pistons for 2.0 Litre Petrol Engine Ref: S1PISTONSET
Application: Series 1 engine with 2.0 litre petrol engine.
Description: Reproduction set of 4 pistons with piston rings, gudgeon pins and circlips. Available in standard, .020", 0.030", 0.040" and 0.060" oversize.
Price: £481.25 (£577.50 Including VAT at 20%)

Size:

Standard
0.020" oversize
0.030" oversize
0.040" oversize
0.060" oversize

Set of 4 Pistons for 2.0 Litre Petrol Engine

Exhaust Valve Ref: 264137
Application: Series 1 petrol engines.
Description: Reproduction exhast valve.
Approximate dimensions: overall length 10.7cm(4.2"), head diameter 32mm(1.3"), stem diameter 8.8mm(0.35")
Price: £19.58 (£23.50 Including VAT at 20%)

Piston Ring Set 2.0ltr Diesel Ref: RTC2416
Application: Series 1 & 2, 2.0ltr diesel engine.
Description: Piston set of rings in standard size. Each piston set consists of 1x chromed top ring, 2x further compression rings and 2x oil control rings. Manufactured by Sheepbridge Engineering Co - British made.
Price: £10.00 (£12.00 Including VAT at 20%)

Top Piston Ring 2.0ltr Diesel Ref: 247170
Application: Series 1 & 2, 2.0ltr diesel engine.
Description: Chromed top compression ring standard size, genuine boxed.
Price: £3.84 (£4.61 Including VAT at 20%)

Connecting Rod 2.0ltr Diesel Ref: 518808
Application: Series 1 & 2 with 2.0 litre diesel engine.
Description: Connecting rod still in remains of protective wax. Unfortunately we have only 2 of these.
Price: £25.00 (£30.00 Including VAT at 20%)

Gasket Oil Retaining Cap to Block Ref: 9089
Application: Series 1 fitted with 1600cc petrol (gasolene) engine and 1954 only 2000cc petrol (gasolene) engine.
Description: Cork gasket for oil retaining cap to rear of cylinder block.
Approximate dimensions: internal diameter 108mm (4.25")
Price: £2.47 (£2.96 Including VAT at 20%)

Locker Starter Dog to Crankshaft Ref: 247771
Application: Series 1 with 1.6ltr petrol, 2.0ltr petrol or 2.0ltr diesel engine.
Description: Locker for starter dog to crankshaft nose.
Price: £2.58 (£3.10 Including VAT at 20%)

Locker Camshaft Bolt Ref: 9210
Application: 1.6ltr petrol, 2.0ltr petrol and 2.0ltr diesel engines.
Description: Locker for bolt retaining camshaft wheel to camshaft.
Price: £0.40 (£0.48 Including VAT at 20%)

Woodruff Key Camshaft Ref: 230313
Application: 1.6ltr petrol, 2.0ltr petrol and 2.0ltr diesel engines.
Description: Woodruff key for keying camshaft wheel to camshaft
Price: £0.90 (£1.08 Including VAT at 20%)

Rocker Cover Gasket Ref: 267781
Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.
Description: Gasket for rocker cover to cylinder head.
Price: £3.95 (£4.74 Including VAT at 20%)

Timing Chain - AE boxed Ref: ETC4499
Application: Series 1 1.6ltr & 2ltr petrol engines, Series 2&3 2.25ltr petrol & diesel engines.
Description: Duplex timing chain with 78 links and pitch of 3/8". From Federal Mogul as an AE product.
Original part number: 09156
Price: £10.45 (£12.54 Including VAT at 20%)

Gasket Side Cover Ref: 267779
Application: 1600 & 2000cc petrol (gasolene) engines.
Description: Gasket between side cover and cylinder block.
Price: £3.44 (£4.13 Including VAT at 20%)

Oil Seal between Crankshaft and Front Cover Ref: ERR6490
Application: S1 1600 & 2000 petrol, 2ltr diesel, Series 2 & 3 4 and 6 cylinder engines, 200Tdi and 300TDi.
Description: Oil seal by Corteco for engine front cover.
Approximate dimensions: outside diameter 63.5mm (2.5"), thickness 10mm (3/8").
Original part number 213744.
Price: £3.15 (£3.78 Including VAT at 20%)

Genuine Oil Filter Element RTC3183 Ref: RTC3183
Application: Series1 2 litre petrol, S2A & S3 2.6 litre 6 cylinder petrol.
Approximate dimensions: 70mm diameter x 173mm long.
Price: £3.90 (£4.68 Including VAT at 20%)

Gasket Water Pump S1 Ref: 9118
Application Series 1 1.6ltr &2.0Ltr petrol (gasolene) engine.
Description: Original cork gasket between water pump and cylinder block.
Price: £2.00 (£2.40 Including VAT at 20%)

Gasket Cylinder Head End Plates Ref: 213811
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Original cork gasket for cylinder head end plates.
Price: £2.00 (£2.40 Including VAT at 20%)

Gasket By-pass Hose Ends Ref: 210419
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Original gasket to water pump and cylinder head for end tubes of by-pass hose.
Price: £2.43 (£2.92 Including VAT at 20%)

Gasket Oil Filter Housing to Block Ref: ERR3607
Application: Series 1 1.6 & 2.0 litre petrol, 2.0ltr diesel, Series 2 & 3 4 and 6 cylinder engines.
Description: Gasket between oil filter housing and cylinder block.
Original part number 272839.
Price: £0.93 (£1.12 Including VAT at 20%)

Oil Pressure Switch Ref: 90519864
Application: Series 1 2.0ltr petrol & 2.0ltr diesel, S2&3 2.25ltr petrol & diesel.
Description: Oil pressure switch for oil pressure warning light.
Original part number 505152
Price: £1.96 (£2.35 Including VAT at 20%)

Gasket Inlet Pipe to Water Pump Ref: 213724
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Reproduction gasket.
Price: £0.89 (£1.07 Including VAT at 20%)

Copper Washer Oil Feed Pipe Ref: 232039
Application: Series 1 1.6ltr & 2.0ltr petrol and 2.0ltr diesel, S2&3 2.25ltr petrol & diesel engines.
Description: sealing washer for oil feed pipe to cylinder head.
Approximate dimensions: internal diameter 10mm (3/8")
Price: £0.17 (£0.20 Including VAT at 20%)

Water Pump Series1 Petrol Ref: 269974
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Reproduction cast iron water pump, supplied with gaskets.
Price: £38.85 (£46.62 Including VAT at 20%)

Sealing Ring Water Pump to Cylinder Head Ref: RTC1975
Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
Price: £3.40 (£4.08 Including VAT at 20%)

Copper Ring Water Pump to Thermostat Housing Ref: 9197
Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
Price: £5.10 (£6.12 Including VAT at 20%)

Related products:

1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)

Fan Belt Ref: 218576
Application: Series 1 with 1.6 litre and 2.0 litre petrol engines.
Description: New old stock fan belt, but still pliable and not cracked.
Approximate dimensions: outer width 18mm(0.7"), inner width 12mm(0.5"), outer circumference 98cm( 38.6")
Price: £16.50 (£19.80 Including VAT at 20%)

'O' Ring for Thermostat Ref: 527235
Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
Price: £0.46 (£0.55 Including VAT at 20%)

Thermostat 82 degrees Ref: 602687
Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.
Description: Waxstat 82degree thermostat.
Original part number: 504560.
Price: £2.35 (£2.82 Including VAT at 20%)

Water Outlet Ref: 263607
Application: Series 1 1.6ltr & 2.0ltr petrol engines.
Description: Water outlet on top of engine over thermostat.
Price: £14.56 (£17.47 Including VAT at 20%)

Clutch Plate 9" Ref: 591704
Application: Series 1, Series 2 and 2A. Where 9" clutch is used.
Description: Nine inch diameter clutch plate by 'Borg & Beck - Delphi' (HB8748). This has a ten spline centre.
Approximate dimensions: overall diameter 230mm.
Price: £43.50 (£52.20 Including VAT at 20%)

Clutch Cover 9" Ref: 591705
Application: Series 1, Series 2 and 2A. Where 9" clutch is used.
Description: Clutch cover plate (pressure plate) for nine inch diameter friction disc. By 'Borg & Beck - Delphi' (HA2520).
Price: £66.54 (£79.85 Including VAT at 20%)

Gasket Carburetter to Inlet Manifild Ref: 212233
Application: 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Gasket for base of Solex carburetter.
Price: £2.25 (£2.70 Including VAT at 20%)

Gasket Inlet Manifold to Cylinder Head Ref: 9179
Application: 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Gasket for outer legs of inlet manifold, 2 per engine.
Price: £4.65 (£5.58 Including VAT at 20%)

Gasket Water Branch to Cylinder Head Ref: 210447
Application: 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Gasket for centre of inlet manifold (the water branch) to cylinder head.
Price: £0.89 (£1.07 Including VAT at 20%)

Gasket Set Exhaust Manifold Ref: RTC3326
Application: 1.6ltr & 2.0ltr Series 1 petrol and 2.6ltr Series 2A & 3 petrol.
Description: Set of 3 gaskets. All 3 used for 6 cylinder engine, only 2 outer gaskets for the 4 cylinder engine.
Price: £5.25 (£6.30 Including VAT at 20%)

Gasket Exhaust Manifold to Down Pipe Ref: 213358
Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
Price: £0.80 (£0.96 Including VAT at 20%)

Exhaust Manifold Ref: 216548
Application: Series 1 with 1.6 litre petrol engine,
Description: Reproduction cast iron exhaust manifold.
Price: £145.00 (£174.00 Including VAT at 20%)

Exhaust Manifold Ref: 237978
Application: Series 1 2.0ltr petrol (gasolene) engine.
Description: Reproduction exhaust manifold, supplied without studs.
Price: £145.00 (£174.00 Including VAT at 20%)

Spigot Bush Ref: LFB500050
Application: All 4 and 6 cylinder engines fitted to Series 1, 2 & 3. Also 200 & 300TDi fitted to Defender, Discovery 1 and Range Rover Classic.
Description: Bronze bush fitted to rear of crankshaft to take nose of first motion shaft of gearbox.
Original part number 8566.
Price: £1.21 (£1.45 Including VAT at 20%)

Gasket Cover Plate to Timing Window Ref: 50216
Application: S1, S2 & S3 4 cylinder engines.
Description: Cork gasket for cover plate on flywheel housing.
Price: £0.88 (£1.06 Including VAT at 20%)

Digital Dispensary > Land Rover Series One Parts > Land Rover Series One Engine Parts

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO