Dingocroft Water pumps and viscous units

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Regular Service and Repair Parts > Cooling System > Water pumps and viscous units

Water Pump Series1 Petrol Ref: 269974
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Reproduction cast iron water pump, supplied with gaskets.
Price: £38.85 (£46.62 Including VAT at 20%)

Gasket Water Pump S1 Ref: 9118
Application Series 1 1.6ltr &2.0Ltr petrol (gasolene) engine.
Description: Original cork gasket between water pump and cylinder block.
Price: £2.00 (£2.40 Including VAT at 20%)

Replacement Water Pump S2a & S3 Ref: STC3758D
Replacement water pump for 2.25 litre petrol and diesel engines. This is the '9 hole' pump for civillian Land Rovers. Military Land Rovers quite often have a '7 hole' pump. The holes refer to the mounting holes for the pump. Supplied with gasket.
Application: Series 2A (not Series 2) and Series 3 2.25litre engines.
Approximate dimensions: 27cm x 14cm, height of spindle 10cm.
Photo of pump's rump
Price: £24.00 (£28.80 Including VAT at 20%)

Repair kit for Water Pump S2 & S3 Ref: RTC3072D
Replacement repair kit for water pump. This is for the masochist who has a hydraulic press!
Application: Series 2A and Series 3 2.25 litre petrol and diesel engines. Also applicable to Ser2 and military engines with appropriate gasket.
Kit comprises shaft with bearing, impellor, eal, fan hub and 9 hole gasket.
Price: £10.95 (£13.14 Including VAT at 20%)

Rebuild Kit for Water Pump 2.6ltr 6cyl Ref: 605716
Application: 2.6ltr straight 6 engine fitted to Series 2A & Series 3.
Description: Rebuild kit for water pump containing spindle & bearing, carbon seal, locating screw, and gaskets. Spindle or impellor may need machining as there have been different spindle/impellor diameters over time. Hub and impellor are no longer available.
Price: £19.57 (£23.48 Including VAT at 20%)

Replacement Water Pump for Defender Ref: STC635D
Replacement water pump for Defender, supplied with gasket.
Application: 2.5 litre diesel and 2.5 litre petrol with air con and A127 alternator. 2.5 diesel turbo standard and air con versions.
Approximate dimensions: 29cm x 15cm, spindle height 13cm
Rump of the pump ....
Price: £35.00 (£42.00 Including VAT at 20%)

Replacement Water Pump Defender 200TDi Ref: STC639D
Replacement water pump with gasket.
Application: Defender 200TDi.
Approximate dimensions: 29cm x 15cm, spindle height 12.5cm
Rump of the pump ....
Price: £41.85 (£50.22 Including VAT at 20%)

Replacement Viscous Unit 2.5Dt & 200TDi Ref: ETC7238=
Replacement viscous unit.
Application: Defender 2.5DT UK & Europe, 200TDI UK & Europe in Defender, Discovery and Classic Range Rover.
Approximate dimensions: overall diameter 15cm, height 5.7cm, left hand thread mounting nut 32mm across flats.
View of the other side ....
Price: £56.25 (£67.50 Including VAT at 20%)

Replacement Water Pump V8 Ref: STC1611D
Replacement water pump supplied with gasket. Non viscous unit type, fan is bolted directly to pump.
Application: Range Rover Classic carb engines to approx 1980, Defender V8 non air con.
Approximate dimensions: 27cm x 20cm, spindle height 16.5cm.
Rump of the pump ....
Price: £24.00 (£28.80 Including VAT at 20%)

Gasket for V8 Water Pump Ref: 610756
Application: Rover P5, P6 and SD1.
Description: Gasket for V8 water pump as fitted to Rover P5, P6 and SD1. (And occasionally as retrofitted to Land Rovers)
Price: £1.95 (£2.34 Including VAT at 20%)

Replacement Water Pump for V8 Defender Ref: STC488D
Replacement water pump for Defender V8 with air conditioning. From 1984 to approx 1994.
Approximate dimensions: 27.5cm x 20cm, spindle height 14cm
Supplied with gasket.
Rear view
Price: £44.10 (£52.92 Including VAT at 20%)

Replacement Water Pump for V8 EFI Ref: STC483D
Replacement water pump for V8 EFi engines, both 3.5 and 3.9 litre. Supplied with gasket.
Application: Discovery 1 1989 to 1994, Range Rover Classic 1986 to 1994.
Aproximate dimensions: 27.5cm x 20cm , spindle height 14cm
View of the rump of the pump
Price: £47.50 (£57.00 Including VAT at 20%)

Replacement Water Pump for 200TDi Ref: RTC6395D
Replacement water pump for 200TDi engines. Supplied with gasket.
Application: Discovery and Range Rover Classic, NOT Defender.
Approximate dimensions: 27cm x 17cm, spindle height 12.5cm
Rear view of pump
Price: £45.00 (£54.00 Including VAT at 20%)

Genuine Water Pump 300TDi Ref: PEB500090
Genuine Land Rover water pump with gasket.
Application: 300TDi engine when fitted to Defender, Discovery or Range Rover Classic.
Approximate dimensions: 21.5cm x 12.5cm, spindle height 6cm.
Engine side of pump .....
Price: £43.58 (£52.30 Including VAT at 20%)

Replacement Vscous Unit 300TDi Ref: ERR2266=
Replacement viscous unit for 300TDi engines.
Application: Discovery 1994 to 1999, Defender 1994 to 2002ish, Range Rover Classic 1994 to 1995.
Approximate dimensions: overall diameter 165mm, height 70mm. Left hand thread mounting nut 32mm across flats.
View of the other side
Price: £55.20 (£66.24 Including VAT at 20%)

Replacement Water Pump V8 Serpentine Engines Ref: STC4378D
Application: Rover V8 engines in the following models; Discovery 1 1995 to 1998, Discovery 2, Range Rover 38A (second generation). These are the serpentine belt engines 4.0 litre and 4.6 litre.
Description: Replacement water pump and gasket.
Approximate dimensions: Overall length 260mm (10.2"), end of spindle to casting face 110mm (4.33"), overall width 150mm (5.9").
Click for view of rear .....
Price: £55.00 (£66.00 Including VAT at 20%)

Replacement Viscous Unit - V8 Serpentine Engine Ref: ERR3443=
Replacement viscous drive unit for cooling fan.
Application: Discovery V8 from 1994 to 1999, Range Rover Classic 1994 to 1995, Defender V8i (not NAS models). This is for engines using a multi-groove serpentine auxilliary drive belt.
Approximate dimensions: overall diameter 17cm, height 7cm, mounting has left hand thread and is 36mm across flats.
View of the other side
Price: £75.00 (£90.00 Including VAT at 20%)

Digital Dispensary > Regular Service and Repair Parts > Cooling System > Water pumps and viscous units

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO