Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Electrical Parts
Page:   <<   <  1  2  3
Rear 'D' Lamp - single bulb holder Ref: 217618DD
Application: Series 1 models.

Description: Reproduction 'D' lamp. Rear facing lens is red glass, number plate lens is clear plastic. Fitted with 1x 21/5watt bulb for stop, tail and number plate illumination. NB single red lens with no separating bar.

Price: 58.00 (69.60 Including VAT at 20%)




People who bought this item also bought:
1. Grommet for Steering Column (Ref: 301283)
Rear 'D' Lamp - single bulb holder
Wiper Arm Ref: 261503
Application: Series One - all years.
Description: Reproduction wiper arm from Tex Classic. Adjustable length from 22 to 29cm (8.7" to 11.4"), 1/4" collet fixing

Price: 22.55 (27.06 Including VAT at 20%)




People who bought this item also bought:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
2. Wiper Blade (Ref: 261504)
3. Wiper Motor with switch (Ref: ZZS14602)
Wiper Arm
Wiper Blade Ref: 261504
Application: Series One - all years.
Description: Reproduction wiper blade by Tex Classic. Length 23cm (9"), peg fixing (peg not included).

Price: 8.52 (10.22 Including VAT at 20%)




People who bought this item also bought:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
2. Wiper Arm (Ref: 261503)
3. Wiper Motor with switch (Ref: ZZS14602)


Related products:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
Wiper Blade
Rubber Peg for Wiper Blade Ref: ZZB00100
Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")

Price: 0.79 (0.95 Including VAT at 20%)




People who bought this item also bought:
1. Wiper Blade (Ref: 261504)
2. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
3. Wiper Arm (Ref: 261503)
Rubber Peg for Wiper Blade
Speedo Drive Cable Ref: RTC3484D
Application: Series One, Series 2 and 2A.
Description: Speedo cable assembly incorporating both inner and ouiter cables.
Approximate dimensions: Overall length 73"(85cm)
Original part numbers: 234536 & 234537, 270717 and 270718.

Price: 8.00 (9.60 Including VAT at 20%)




People who bought this item also bought:
1. Retainer and Fixings for Hi/Lo Gaiter (Ref: 303817KIT)
2. Spring High/Low Selector Shaft (Ref: 217445)
3. Blanking Gommet for Bell Housing (Ref: 232604)
Speedo Drive Cable
Combined Guage Ref: 519827
Application: Series 1 1954-1958, Series 2 & 2A to suffix C inclusive.

Description: Old stock original guage comprising ampmeter, fuel guage and main beam warning lamp.

Approximate dimensions: Overall diameter 104mm(4.1")

Price: 105.40 (126.48 Including VAT at 20%)



Combined Guage
Grommet - wiring Ref: 3H822L
Application: Series1, Series2, Series3 and Defender.

Description: Black buber wiring grommet.

Approximate dimensions: Outside diameter 25mm(1"), inside diameter 12mm(0.5"), thickness 6mm(0.25")

Price: 0.60 (0.72 Including VAT at 20%)



Grommet - wiring
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Electrical Parts
Page:   <<   <  1  2  3

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -