Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:
  •  

Product Sections


Best Sellers

Spider Bypass Link Cable

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender. 
Description: 52mm deep socket, 1/2" drive for hub locking nuts.



find out more

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Polybush suspension bushes > Polybush full vehicle sets
Standard Polybush Set Defender to 1993 Ref: ZZPOLYBUSHSET01
Standard set of Polybush covers both ends of front radius arms, both ends of rear lower link and Panhard rod bushes.
Application: Defender 90, 110 and 130 to 1993
Available in Classic and Comfort Formulas.
Formula information .....
Price: £116.14 (£139.37 Including VAT at 20%)

Choose Classic, Comfort or Dynamic
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Polybush Set Defender to 1993
Fixing kit for standard set 01 Ref: ZZPOLYBUSHSET01FIX
The set of nuts, bolts and washers for fitting Polybush Set01.
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £23.40 (£28.08 Including VAT at 20%)



Fixing kit for standard set 01
Standard Set Plus for Defender to1993 Ref: ZZPOLYBUSHSET01A
Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 90, 110 and 130 to 1993
Available in Classic and Comfort Formulas.
Formula information .....
Price: £135.09 (£162.11 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Set Plus for Defender to1993
Fixing kit for Standard Set Plus 01A Ref: ZZPOLYBUSHSET01AFIX
The set of nuts, bolts and washers for fitting Polybush Set01A.
(Standard Set Plus for Defender to 1993)
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £26.20 (£31.44 Including VAT at 20%)



Fixing kit for Standard Set Plus 01A
Standard Set for Classic Range Rover, Disco I and Defender Ref: ZZPOLYBUSHSET02
Standard set of Polybush covers both ends of front radius arms, both ends of rear lower link and Panhard rod bushes.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
Formula information .....
Price: £116.14 (£139.37 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Set for Classic Range Rover, Disco I and Defender
Fixings kit for Standard Set 02 Ref: ZZPOLYBUSHSET02FIX
The set of nuts, bolts and washers for fitting Polybush Set02.
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £27.14 (£32.57 Including VAT at 20%)



Fixings kit for Standard Set 02
Standard Set Plus for Defender, Classic Range Rover and Discovery Ref: ZZPOLYBUSHSET02A
Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
Formula information .....
Price: £135.09 (£162.11 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Set Plus for Defender, Classic Range Rover and Discovery
Fixing kit for Polybush Set02A Ref: ZZPOLYBUSHSET02AFIX
The set of nuts, bolts and washers for fitting Polybush Set02A.
(Standard Set Plus for Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999)
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £29.95 (£35.94 Including VAT at 20%)



Fixing kit for Polybush Set02A
Standard Set for Range Rover Classic to 1985 Ref: ZZPOLYBUSHSET03
Standard set of Polybush covers both ends of front radius arms, both ends of rear lower link and Panhard rod bushes.
Application: Range Rover Classic to 1985.
N.B. this set does not include the triangular plates for bottom link to chassis bushes. These are available as part set KIT1FP - see part sets section.
Available in Classic and Comfort Formulas.
Formula information .....
Price: £104.13 (£124.96 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Set for Range Rover Classic to 1985
Fixings kit for Standard Set 03 Ref: ZZPOLYBUSHSET03FIX
The set of nuts, bolts and washers for fitting Polybush Set03.
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £23.40 (£28.08 Including VAT at 20%)



Fixings kit for Standard Set 03
Standard Set Plus for Range Rover Classic to 1985 Ref: ZZPOLYBUSHSET03A
Standard set of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis bushes.
Application: Range Rover Classic to 1985.
N.B. this set does not include the triangular plates for bottom link to chassis bushes. These are available as part set KIT1FP - see part sets section.
Available in Classic and Comfort Formulas.
Formula information .....
Price: £123.07 (£147.68 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Dynamic - Orange   
Comfort - Blue   



Standard Set Plus for Range Rover Classic to 1985
Fixings kit for Standart Set Plus 03A Ref: ZZPOLYBUSHSET03AFIX
The set of nuts, bolts and washers for fitting Polybush Set03A.
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £26.20 (£31.44 Including VAT at 20%)



Fixings kit for Standart Set Plus 03A
Full set Ser1, Ser2 and SWB Ser3 Ref: ZZPOLYDYNASET04
Full Set of Polybush covers the spring end bushes plus the chassis bushes for springs.
Application: Series 1 (except early narrow leaf types), Series 2 & 2A, short wheel base Series3.
Available in only in Dynamic Formula.
Formula information .....
Price: £81.63 (£97.96 Including VAT at 20%)



Full set Ser1, Ser2 and SWB Ser3
Full Set for LWB Series3. Ref: ZZPOLYDYNASET05
Full Set of Polybush covers the spring end bushes plus the chassis bushes for springs.
Application: Series 3 long wheel base.
Available in only in Dynamic Formula.
Formula information
Price: £81.62 (£97.94 Including VAT at 20%)



Full Set for LWB Series3.
Fixings kit for Set04 and Set05 Ref: ZZPOLYDYNASET04FIX
The set of nuts, bolts and washers for fitting Polybush Set03.
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Application: Ser1, Ser2, Ser2A and Ser3.
Price: £18.81 (£22.57 Including VAT at 20%)



Fixings kit for Set04 and Set05
Standard Set for Range Rover 38A Ref: ZZPOLYDYNASET19
Standard set covers both ends of the front radius arms and the chassis end of the rear radius arms. It also covers front and rear Panhard rods.
Application: 2nd Generation Range Rover 1995 to 2002.
Available in Dynamic and Comfort formulations.
Formula information .....
Price: £143.56 (£172.27 Including VAT at 20%)

Choose Classic or Comfort
Dynamic   
Comfort   



Standard Set for Range Rover 38A
Fixings kit for R/Rover 38A standard set Ref: ZZPOLYDYNASET19FIX
The set of nuts, bolts and washers for fitting Polybush Set19 (standard set for Range Rover 38A, 1995 to 2002)
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £87.80 (£105.36 Including VAT at 20%)



Fixings kit for R/Rover 38A standard set
Standard Set Plus for Range Rover 38A Ref: ZZPOLYDYNASET19A
Standard set plus covers both ends of the front radius arms and the chassis end of the rear radius arms. It also covers front and rear Panhard rods. In addition front anti-roll clamp bushes are included.
Application: 2nd Generation Range Rover 1995 to 2002.
Available in Dynamic and Comfort formulations.
Formula information .....
Price: £157.05 (£188.46 Including VAT at 20%)

Choose Classic or Comfort
Dynamic   
Comfort   



Standard Set Plus for Range Rover 38A
Fixings kit for standard set Plus, R/Rover 38A Ref: ZZPOLYDYNASET19AFIX
The set of nuts, bolts and washers for fitting Polybush Set19A (standard set plus for Range Rover 38A, 1995 to 2002)
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £94.67 (£113.60 Including VAT at 20%)



Fixings kit for standard set Plus, R/Rover 38A
Standard Set for Defender 2002 on Ref: ZZPOLYBUSHSET68
Standard set of Polybush covers both ends of front radius arms, both ends of rear lower link and Panhard rod bushes.
Application: Defender 2002 onwards.
Available in Classic and Comfort Formulas.
Formula information .....
Price: £118.42 (£142.10 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Set for Defender 2002 on
Fixing kit for Standard Set 68 Ref: ZZPOLYBUSHSET68FIX
The set of nuts, bolts and washers for fitting Polybush Set68.
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £34.10 (£40.92 Including VAT at 20%)



Fixing kit for Standard Set 68
Standard Set Plus for Defender 2002 on Ref: ZZPOLYBUSHSET68A
Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 2002 onwards.
Available in Classic and Comfort Formulas.
Formula information .....
Price: £137.37 (£164.84 Including VAT at 20%)

Choose Classic or Comfort
Classic - Red   
Comfort - Blue   
Dynamic - Orange   



Standard Set Plus for Defender 2002 on
Fixing kit for Polybush Set Plus 68A Ref: ZZPOLYBUSHSET68AFIX
The set of nuts, bolts and washers for fitting Polybush Set68A.
(Standard Set Plus for Defender 2002 onwards)
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £37.40 (£44.88 Including VAT at 20%)



Fixing kit for Polybush Set Plus 68A
Polybush set for Freelander Ref: ZZPOLYBUSHSET69
Full kit of bushes covering anti-roll bar, radius arms, lower link, front and rear wishbones.
Only available in the one set which includes composite bushes and different formulations for different functions.
Application: Freelander from 1998
Price: £158.31 (£189.97 Including VAT at 20%)



Polybush set for Freelander
Fixings kit for Set 69 - Freelander Ref: ZZPOLYBUSHSET69FIX
The set of nuts, bolts and washers for fitting Polybush Set69 (Freelander 1998 on).
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £70.77 (£84.92 Including VAT at 20%)



Fixings kit for Set 69 - Freelander
Polybush Set for Discovery 2 Ref: ZZPOLYBUSHSET20
Full kit of bushes covering front and rear radius arms, panhard rod and rear Watts links to rear axle.
Only available in the one set which includes composite bushes and different formulations for different functions.
Application: Discovery 2, 1998 to 2004.
Price: £179.53 (£215.44 Including VAT at 20%)



Polybush Set for Discovery 2
Fixing Kit for Polybush Set 20 Ref: ZZPOLYBUSHSET20FIX
Application: Discovery 2 1998 to 2004.
Description: Full nut and bolt set to fit Polybush Set 20. Only available as genuine Land Rover parts, hence the price!
Price: £76.13 (£91.36 Including VAT at 20%)



Fixing Kit for Polybush Set 20
Full Set of Wishbone Bushes for Discovery3 & 4 Ref: ZZPOLYBUSHSET105
Application: Discovery 3 & 4.
Description: Full set of wishbone bushes for front and rear suspension. Includes the above part kits 1BG, 1BH, 1BJ, 1BL, 1BM, 1BN & 1BP.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in either Classic red or Dynamic orange formulations.
Formula information . . .
Price: £296.76 (£356.11 Including VAT at 20%)

Choose Classic or Dynamic formulation



Full Set of Wishbone Bushes for Discovery3 & 4
Full Set of Wishbone Bushes for Range Rover Sport Ref: ZZPOLYBUSHSET113
Application: Range Rover Sport.
Description: Full set of wishbone bushes for front and rear suspension. Includes the above part kits 1BG, 1BU, 1BJ, 1BL, 1BM, 1BN & 1BP.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in either Classic red or Dynamic orange formulations.
Formula information . . .
Price: £296.76 (£356.11 Including VAT at 20%)

Choose Classic or Dynamic formulation



Full Set of Wishbone Bushes for Range Rover Sport
Digital Dispensary > Polybush suspension bushes > Polybush full vehicle sets

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Rear Brake Cylinder

Rear Brake Cylinder

£7.98

Application: Freelander One to 'YA'.
Description: Original equipment rear brake cylinder for vehicles to approx 2000. These cylinders are not handed.
Approximate dimensions: Casting 4.7cm(1.85") long
find out more

Caliper Seal Kit

Caliper Seal Kit

£6.29

Application: Freelander One from '1A'.
Description: Replacement seals to service both front calipers on later vehicles with vented discs.
Approximate dimensions: 2 seals with outside diameter of 7cm(2.8"), 2 'O' rings with outside diameter of 6cm(2.4")
find out more

Kit of Brake Caliper Guide Pins

Kit of Brake Caliper Guide Pins

£17.58

Application: Freelander One from '1A'.
Description: Genuine kit of guide pins to service pair of front brake calipers.
Approximate dimensions: 2 pins 5.9cm(2.3") long, 2 pins 7.0cm(2.8") long.
find out more

Front Brake Disc - Vented

Front Brake Disc - Vented

£14.03

Application: Freelander One from '1A'.
Description: Replacement vented brake disc for front wheels. Priced as single disc, but strongly recommended to be fitted in pairs.
Approximate dimensions: Overall diameter 27.6cm(10.9"), 2.0cm(0.8") thick, offset 3.2cm(1.3")
find out more

Fixing Clip kit for Front Pads

Fixing Clip kit for Front Pads

£2.96

Application: Freelander One from '1A'.
Description: Genuine set of 4 fixing clips for front brake pads on vehicles with vented front discs.
Approximate dimensions: Each clip is 7.5cm(3") long.
find out more

Front Brake Pad Set - Genuine

Front Brake Pad Set - Genuine

£42.74

Application: Freelander One from '1A'.
Description: Genuine boxed front brake pad set for later models with vented discs. Supplied with 4 new fixing bolts.
Approximate dimensions: Each pad is 13cm(5.1") long by 5.5cm(2.1") wide.
Original part number: SFP500100.
find out more

Front Brake Pad Set

Front Brake Pad Set

£20.69

Application: Freelander One from '1A'.
Description: Mintex boxed front brake pad set for later models with vented discs.
Approximate dimensions: Each pad is 13cm(5.1") long by 5.5cm(2.1") wide.
find out more

Brake Disc - non vented

Brake Disc - non vented

£11.40

Application: Freelander One to 'YA'.
Description: Replacement solid brake disc for front wheels. Priced as single disc, but stronglt recommended to be fitted in pairs.
Approximate dimensions: Overall diameter 26.2cm(10.3"), 1.4cm(0.55") thick, offset 4cm(1.6")
find out more

Front Brake Pad Set

Front Brake Pad Set

£25.16

Application: Freelander One to YA.
Description: Delphi boxed set of front brake pads for early models with solid discs.
Approximate dimensions: Each pad is 13cm(5.1") long by 6.7cm(2.6") wide.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO