Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2  3  4   >   >>
Electric Fuel Pump Series 1 - AUB79 Ref: AUB79
Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. SU part number AUA66. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Outlet has 'push on' connector and inlet threaded connector.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6
Back in stock again!!





Price: 83.70 (100.44 Including VAT at 20%)



Electric Fuel Pump Series 1 - AUB79
SU Fuel Pump - Electronic Positive Earth Ref: AUA66EP
Application: Series 1 Land Rovers 1948 to 1958. Series 2 2litre.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. SU part number AUA66EP. For mounting in engine bay. Positive earth vehicles only.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

Back in stock

Price: 103.20 (123.84 Including VAT at 20%)



SU Fuel Pump - Electronic Positive Earth
SU Fuel Pump - Electronic Negative Earth Ref: AUA66EN
Application: Series 1 Land Rovers 1948 to 1958. Series 2 2litre.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. SU part number AUA66EN. For mounting in engine bay. Negative earth vehicles only.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

Price: 103.20 (123.84 Including VAT at 20%)



SU Fuel Pump - Electronic Negative Earth
Electric Fuel Pump - Series 1 Ref: AUA25
Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

Price: 83.70 (100.44 Including VAT at 20%)




People who bought this item also bought:
1. S1 86/88" Brake Pipe Set LHD (Ref: ZZGL5608)
2. Rubber Peg for Wiper Blade (Ref: ZZB00100)
3. Tee Piece (Ref: BTB657L)
Electric Fuel Pump - Series 1
SU Fuel Pump - Electronic Negative Earth Ref: AUA25EN
Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

Price: 102.35 (122.82 Including VAT at 20%)



SU Fuel Pump - Electronic Negative Earth
Service Kit for AUA66 Series 1 Fuel Pump Ref: ZZEPK705
Service kit for modern Series 1 fuel pump AUA66 - see above.
This is NOT applicable for the original fuel pump - see ZZEPK700.

Price: 30.35 (36.42 Including VAT at 20%)



Service Kit for AUA66 Series 1 Fuel Pump
Outlet Union for SU Fuel Pump Ref: 262294
Application: Series 1 petrol models.

Description: Outlet union threaded 1/4"BSP male. This can be fitted in place of the plain outlet spigot supplied with AUB79, AUA66EP and AUA66EN electric fuel pumps. Suits 2729 and 2728 connectors for use with 5/16" diameter copper fuel pipe.

Approximate dimensions: Length 20.6mm(0.81"), lower thread 22mm(0.87") diameter, hexagon is 18mm across flats.

Price: 7.48 (8.98 Including VAT at 20%)





Related products:
1. Nipple - Fuel pipe (Ref: 2728)
2. Nut - Fuel Pipe (Ref: 2729)
Outlet Union for SU Fuel Pump
Flow Stem 1/4" Ref: ABF2521
Application: SU Fuel pumps.

Description: Flow stem to allow push-on connection for input on SU fuel pumps. Use with 2729 union nut.

Price: 2.65 (3.18 Including VAT at 20%)





Related products:
1. Nut - Fuel Pipe (Ref: 2729)
Flow Stem 1/4
Outlet Nozzle - SU Fuel Pump Ref: AUA1424
Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

Price: 3.70 (4.44 Including VAT at 20%)



Outlet Nozzle - SU Fuel Pump
Replacement Pump Series 2A and Series 3 Ref: 549761D
Replacement fuel lift pump.
Application: Series2A and Series3 2.25 petrol engines. Kit AEU2760D services this pump

Price: 13.57 (16.28 Including VAT at 20%)




People who bought this item also bought:
1. Condensor Ducellier (Ref: RTC6620)
2. Spark Plug Champion N12YC (Ref: RTC3570)
3. Contact Breakers Lucas 25D (Ref: RTC3270)
Replacement Pump Series 2A and Series 3
Page:  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -