Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAMPS and Electrical Items > Electrical Miscellany
Page:  1  2  3  4   >   >>
Spider Bypass Link Cable Ref: AMR4956
Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.

Price: 9.66 (11.59 Including VAT at 20%)



Spider Bypass Link Cable
Connector Kit for Defender Switches Ref: ZZPLUG01
Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.

Price: 4.80 (5.76 Including VAT at 20%)




People who bought this item also bought:
1. Trim Clip Assortment (Ref: ZZLAS36045)
2. Front Fog Lamp Switch (Ref: YUG000540LNF)
Connector Kit for Defender Switches
Front Fog Lamp Switch Ref: YUG000540LNF
Application: Defender 2002 onwards.
Description: Front fog lamp switch for facelift dash on Defenders 2002 onwards. Can also be used for auxillary lamps. Connector kit ZZPLUG01 fits this switch.
Approximate dimensions: overall length 66mm (2.6"), fits aperature 26.5mm(1.04") by 16mm (0.625")

Price: 49.64 (59.57 Including VAT at 20%)




People who bought this item also bought:
1. Connector Kit for Defender Switches (Ref: ZZPLUG01)
2. Trim Clip Assortment (Ref: ZZLAS36045)
Front Fog Lamp Switch
Connector Kit for Defender Switches Ref: ZZPLUG02
Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the rear wiper switch YUG000350LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.

Price: 7.49 (8.99 Including VAT at 20%)



Connector Kit for Defender Switches
Switch for Heated Seat - Defender Ref: YUG102430
Application: Defender 2002 onwards.
Description: push on/push off switch for heated seat. ZZPLUG01 or ZZPLUG02 will connect to this if fine splines are trimmed with sharp blade.

Price: 36.93 (44.32 Including VAT at 20%)



Switch for Heated Seat - Defender
Connector Kit for Bulb Holders Ref: ZZLRA102
Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.

Price: 3.67 (4.40 Including VAT at 20%)



Connector Kit for Bulb Holders
Connector Kit for Bulb Holder - 2 pole Ref: ZZLRA103
Application: Double pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to double pole (stop/tail) bulb holder BAU5028L.

Price: 4.10 (4.92 Including VAT at 20%)



Connector Kit for Bulb Holder - 2 pole
Bulb Holder & Lead - Side Repeat Lamp Ref: ZZLRA608
Application: Defender 1995 onwards, Discovery 1 1995 onwards and Range Rover Classic 1993 onwards.
Description: Bulb holder and lead for side repeater indicator lamp. Equivalent to Land Rover part number STC966. Cable length 42cm (16.5").

Price: 27.88 (33.46 Including VAT at 20%)



Bulb Holder & Lead - Side Repeat Lamp
Headlamp Connector Ref: ZZDURITE53951
Application: Sealed beam and H4 bulbs.
Description: Connector kit for sealed beam and H4 headlamps.

Price: 3.01 (3.61 Including VAT at 20%)



Headlamp Connector
Alternator Connector Kit Ref: ZZDURITE0-845-03
Application: Series3, Early Defenders and Early Classic Range Rover. Where ACR type alternators are used.
Description: Connector kit for plug-in type alternators.
Lucas part number 54960402.

Price: 9.65 (11.58 Including VAT at 20%)



Alternator Connector Kit
Digital Dispensary > LAMPS and Electrical Items > Electrical Miscellany
Page:  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Door Mirror Right Hand

Door Mirror Right Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -