Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2  3  4  5   >   >>
Distributor Series 1 - reproduction Ref: 269240
Application: Series 1 2 litre 1953-1958

Description: Reproduction distributor of Lucas type.

Approximate dimensions: Overall length 20cm(7.9"), mounting shaft diameter 27mm(1 1/16")


Price: 82.15 (98.58 Including VAT at 20%)



Distributor Series 1 - reproduction
Genuine Lucas 45D4 Distributor Ref: ETC5835
Application: 4 cylinder petrol engines in Series2A, Series3 and Defender.

Description: New old stock genuine Lucas 4261B distributor.

Price: 48.00 (57.60 Including VAT at 20%)



Genuine Lucas 45D4 Distributor
V8 Waterproofing Kit Ref: ZZBA2840
Application: All V8 models with distributor ignition.

Description: Molded rubber boots for distributor and coil. Supplied with cable ties.

Price: 37.15 (44.58 Including VAT at 20%)



V8 Waterproofing Kit
Copy of Ducellier Distributor Ref: ERC6986D
Application: All Series 2A and Series 3 four cylinder petrol engines. Also 90/110 2.25 petrol engines.
Description: Complete distributor which is a good copy of the Ducellier.

Price: 73.33 (88.00 Including VAT at 20%)



Copy of Ducellier Distributor
Service Kit for Lucas 25D Distributor Ref: DISTSERVKIT01
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.

Description: Kit containing cap - 566859= now Intermotor, rotor arm - RTC3612 in red by Distributor Doctor, contact breakers (points) - RTC3270 and condensor - RTC3472.

See below for specification of kit components.

Price: 11.50 (13.80 Including VAT at 20%)



Service Kit for Lucas 25D Distributor
Service Kit for Lucas 45D Distributor Ref: DISTSERVKIT02
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines and some Defenders

Description: Kit containing genuine cap - RTC3278, red rotor arm - RTC3614R, Lucas contact breakers (points) - RTC6627 and genuine condensor - RTC6621.
See below for specification of kit components.

Price: 26.88 (32.26 Including VAT at 20%)



Service Kit for Lucas 45D Distributor
Service Kit for Ducellier Distributor Ref: DISTSERVKIT03
Application: Ducellier 4cylinder distributor as fitted to Series 2A and Series 3 petrol engines.
Description: Kit containing cap - RTC4932, rotor arm - RTC4933, contact breakers (points) - RTC6625 and condensor - RTC6620.
See below for specification of kit components.

Price: 8.50 (10.20 Including VAT at 20%)



Service Kit for Ducellier Distributor
Distributor Cap - Series 1 Ref: 261240
Application: Land Rover Series 1 1948 to 1953 with Lucas DVXH4A distributor.

Description: High quality reproduction of the original style cap for this distributor. See below for a cheaper alternative.

Approximate dimensions: Overall diameter 82mm(3.2"), height 64mm(2.5").

Lucas part number 415707

Price: 87.00 (104.40 Including VAT at 20%)



Distributor Cap - Series 1
Replacement Distributor Cap Series One Ref: 261240D
Application: Series One 1948 to 1953.

Description: The original cap with side exit HT leads has become expensive - see above. This period cap with vertical exit HT leads is a good, functional alternative.
Approximate dimensions: overall diameter 81.5mm(3.2"), height 65mm(2.56")

Price: 27.50 (33.00 Including VAT at 20%)



Replacement Distributor Cap Series One
Distributor Cap Series One Ref: 245004
Application: Series One 1954 to 1958 Lucas 40504A distributor.
Description: Luas distributor cap part number 54412480
Approximate dimensions: overall diameter 77.5mm(3.05"), height 38mm(2.7")

Price: 20.25 (24.30 Including VAT at 20%)



Distributor Cap Series One
Page:  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -