Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

11.04

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.30

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

These Superb Prices are ONLY available when you order ON-LINE

To search for a product enter search words below. The results will be displayed with links to the specified product. Note that price based searches operate on retail prices and may not match the price you pay.

Search words

Look for products containing all any of the above words
Price range

See Dingo Dotty Deals now for offers too good to miss!!!!

Welcome

Welcome to DINGOCROFT
your reliable
Land Rover parts
specialist.

We are LAND ROVER GENUINE AND ORIGINAL EQUIPMENT PARTS STOCKISTS
We supply parts for Range Rover Classic, Discovery 1, Discovery 2, Discovery 3 (LR2), Defender, Range Rover 38A (2nd generation), Range Rover Generation 3, Range Rover Sport. North American Spec. vehicles, Ser I, II, IIA, III, One Ten, Ninety, Military Models, Freelander 1 and Freelander 2.
In Dingocroft's Digital Dispensary you will find only a small proportion of the full range of the goods we can supply. Here are the goods you can self-select. However since we can supply almost anything you may require for your Land Rover, please ask for your personal quotation via e-mail, fax or telephone.
DINGOCROFT offers World-wide export including USA and Canada, from a small item in a padded envelope to a container load (or anything in between).
We also offer mail order deliveries within the U.K.
Our free van delivery service operates within a 20 mile radius of High Wycombe for orders over £75 otherwise a £4 delivery charge is made. This is available to our private customers as well as to our trade, garage and fleet customers.
DINGOCROFT also has a sales counter open 5 days a week where an ever growing range of parts, tools, accessories, books and all manner of things "Land Rover" are on display.


LAND Rover Series     One PartsLAND Rover Series One Parts
A range of Series One parts from 1948 to 1958. This covers those parts that we sell regularly and/or that we have good stock of.
Other parts are available on a quotation basis only as supply is now difficult or almost impossible on many items.
LAND Rover Series 2 & Series 3 PartsLAND Rover Series 2 & Series 3 Parts
A range of parts for Series 2, 2A and 3 models from 1959 to 1983. These are the more regularly sold maintenance and repair parts.
Most (but not all) parts are still available for these models, if you do not see what you want send us an email and we will do our best to provide a quotation.
DEFENDER PartsDEFENDER Parts
A range of parts for Defender inclluding the early models when they were called Landrover 90, Landrover 110 and Landrover 127. This covers all models from 1983 until 2015. These are the more regularly sold maintenance and repair parts.
Most (but not all) parts are still available for these models, if you do not see what you want send us an email and we will do our best to provide a quotation.
DISCOVERY 1 partsDISCOVERY 1 parts
A range of parts for Discovery 1 models from 1989 to 1998. These are the more regularly sold maintenance and repair parts.
Most (but not all) parts are still available for these models, if you do not see what you want send us an email and we will do our best to provide a quotation.
RANGE ROVER Classic PartsRANGE ROVER Classic Parts
A range of parts for Range Rover Classic models from 1972 to 1995. These are the more regularly sold maintenance and repair parts.
Unfortunately a lot of parts are no longe lavailable for these models, particularly body and trim. If you do not see what you want send us an email and we will do our best to provide a quotation.
FREELANDER 1 PartsFREELANDER 1 Parts
Freelander 1, 1996 to 2004. Here we list a range of the most frequently needed parts for this model.
However if you need something that is not listed, drop us an email and we can quote for it.
REGULAR Service and Repair PartsREGULAR Service and Repair Parts
This section covers regular service items and common distress purchases. We start with Filters, but more sections will follow soon.
STEERING WheelsSTEERING Wheels
Selection of alternative steering wheels
POLYBUSH suspension bushesPOLYBUSH suspension bushes
Polybush, the originator of polyurethane suspension bushes for Land Rover vehicles.
Polyurethane is a superior material which is strong, yet elastic, highly abrasion resistant and which doesn't age or perish, even if soaked in oils and fuel.
Polybushes and Four Wheel Drive Vehicles go together like Peaches and Cream. Four Wheel Drives really use their suspension (with poor roads and speedbumps, even the school run is starting to resembe the Sahara) so you need bushes which will withstand years of twisting, bumping, vibrating, braking and accelerating. What you don't need are bushes which move, rattle or crush causing knocks, creaks and eventually wear to their housings.
Welcome to the world of Polybush! Each bush is tailored to fit beautifully and contribute to excellent handling. The bonus is, Polybushes will give you the same ride quality long after their rubber or cheap urethane counterparts have sagged or split.
OFF-ROAD and Towinq EquipmentOFF-ROAD and Towinq Equipment
Ropes, strops, shackles, towbars, towballs and jerrycans
BOOKS and PublicationsBOOKS and Publications
This section covers Workshop Manuals, Overhaul Manuals, Circuit Diagrams, Electrical Manuals, Parts Lists, Owners Manuals, Other Technical Titles, History, Expedition and General Interest Books.

Lower prices on many books - check and compare!
LAMPS and Electrical ItemsLAMPS and Electrical Items
Auxiliary Lighting, Bulbs, Endurance Essentials, Kenlowe and Lumenition
GIFTSGIFTS
An eclectic mix of gifts and mementos most with the Land Rover theme. So far sections are Headwear, Mugs, Tribute Plaques and Street Signs, Gadgets and Gizmos, Miscellany.
SPECIAL Tools for Land RoverSPECIAL Tools for Land Rover
Bushwacka, Churchill (Land Rover specified) and Franklin tools which are directly relevant to Land Rover models
BODY and Chassis PartsBODY and Chassis Parts
Body and Chassis parts! A very broad title which will probably be refined as more is added. Just a couple of sections to start with.
INTERIOR Trim and PartsINTERIOR Trim and Parts
DINGO Dotty DealsDINGO Dotty Deals
Our special offer section. A strange mix of special purchases, slow moving or short term special offers to tempt you.
TerraFirmaTerraFirma
Terrafirma (Latin meaning Solid Earth)

The Terrafirma range of accessories and equipment has been created to meet the exceptional demands of Land Rover users and enthusiasts. Distributed Internationally through Allmakes 4x4 authorized parts and accessory dealers Terrafirma is one of the most recognized 4x4 accessory brands in the World.

Terrafirma offers choice, clear product identification and application, ensuring the correct product can be selected from the extensive and increasing range of accessories. To satisfy the diverse requirements of 4x4 owners both on and off road Terrafirma have produced an amazing selection of accessories for Land Rovers. In Particular Terrafirma suspension, which is by far the most comprehensive category including the largest range of upgrade shock absorbers, steering dampers, coil springs and suspension hardware available anywhere in the marketplace.

Terrafirma accessories are designed to fit using original or existing mounting points. Only minimal customising may be required with minor trimming or drilling needed to maximise the performance of the vehicle. Trends change and new vehicle models are introduced, as such new products are continually being evaluated and tested for introduction.

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Red Rotor Arm for 6 cylinder Distributor

Red Rotor Arm for 6 cylinder Distributor

7.20

Application: Series 2A and Series 3, 6 cylinder petrol with Lucas 25D6 distributor and Lucas 45D6.

Description: Replacement rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Previous part numbers: GRA102, 262704

Lucas Part number: 418726

find out more

Red Rotor Arm for Lucas 45D

Red Rotor Arm for Lucas 45D

7.20

Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 20mm (0.79 inches)

Lucas part number: 54422803
find out more

Red Rotor Arm for Lucas 25D

Red Rotor Arm for Lucas 25D

7.20

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines. Also applicable to the DM2 distributor to Series 1 1954 to 1958.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 16.5mm (0.65 inches)

Lucas part number: 460051
find out more

Vacuum Unit - 25D type

Vacuum Unit - 25D type

69.60

Application: Series 2A 1958 to 19566with Lucas 25D distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the 25D distributor. This is the early type with threaded connection for the vacuum pipe.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part number: 54411598

find out more

Vacuum Unit - DM2 type

Vacuum Unit - DM2 type

69.60

Application: Series 1 1954 to 1958 with Lucas DM2 distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the DM2 (40504A) distributor.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part numbers: 421943 and 54411727



find out more

Pair of Clips for Distributor Cap

Pair of Clips for Distributor Cap

12.00

Application: Lucas 25D 4 cylinder ditributor as used on Series 2, Series 2A and Series 3.

Description: Nicely made reproduction clips for distributor cap. Sold as a pair.

Approximate dimensions: Overall length 77mm(3"), width 9mm(0.35")

Lucas part number: 421824

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -