Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:

Product Sections


Best Sellers

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

4.08

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Steering Ball Joint Series 3 - RH thread

Steering Ball Joint Series 3 - RH thread

11.52

Application: Late Series 2a and Series 3.

Description: Lemfoerder OE track rod end with right hand thread for adjustment. Supplied with nyloc nut.

Approximate dimensions: Length 11cm(4.3"), height 78mm(3.1"). thread for tube is 11/16" UNF.

Previous part numbers: GSJ152, NTC2026, RTC1808.

find out more

Steering Ball Joint Series 3 - LH thread

Steering Ball Joint Series 3 - LH thread

11.52

Application: Late Series 2a and Series 3.

Description: Lemfoerder OE track rod end with left hand thread for adjustment. Supplied with nyloc nut.

Approximate dimensions: Length 11cm(4.3"), height 78mm(3.1"). thread for tube is 11/16" UNF.

Previous part numbers: GSJ153, NTC2021, RTC1809.


find out more

These Superb Prices are ONLY available when you order ON-LINE

Pack of 10 1/4" BSF Plain Nuts Ref: 3819x10
Pack of ten 1/4" BSF plain nuts 27/64"(10.7mm) across flats, 0.2"(5mm) high.

Price: 0.50 (0.60 Including VAT at 20%)



Pack of 10 1/4
Pack of 10 5/16" BSF Plain Nuts Ref: 2828x10
Pack of ten 5/16"BSF plain nuts, 33/64"(13.2mm) across flats, 0.24"(6.2mm) high.

Price: 3.00 (3.60 Including VAT at 20%)



Pack of 10 5/16
Pack of 10 3/8" BSF Plain Nuts Ref: NH406041L
Pack of ten 3/8"BSF plain nuts, 19/32"(15mm) across flats, 0.35"(8.8mm) high.
Original part number 2827

Price: 0.90 (1.08 Including VAT at 20%)



Pack of 10 3/8
Pack of 10 7/16" BSF Plain Nuts Ref: 594104x10
Pack of ten 7/16" BSF plain nuts, 45/64"(17.8mm) across flats, 3/8"(9.3mm) high.

Price: 1.10 (1.32 Including VAT at 20%)




People who bought this item also bought:
1. Pack of 10 7/16" BSF Nyloc Nuts (Ref: 251323x10)
Pack of 10 7/16
Pack of 10 5/16" BSF Locking Nuts Ref: 251321
Pack of ten 5/16"BSF locking nuts, 33/64"(13.2mm) across flats, 0.32"(8.2mm) high.

Price: 3.60 (4.32 Including VAT at 20%)



Pack of 10 5/16
Pack of 10 3/8"BSF Nyloc Nuts Ref: 251322x10
Pack of ten 3/8"BSF nyloc nuts, 19/32"(15mm) across flats, 0.45"(11.5mm) high.

Price: 1.40 (1.68 Including VAT at 20%)



Pack of 10 3/8
Pack of 10 3/8" BSF Philidas Nuts Ref: 50526x10
Pack of ten 3/8"BSF philidas locking nuts, 19/32"(15mm) across flats, 0.33"(8.5mm) high.
Used for securing hand brake drum on Series vehicles, plus other applications.

Price: 3.60 (4.32 Including VAT at 20%)



Pack of 10 3/8
Pack of 10 7/16" BSF Nyloc Nuts Ref: 251323x10
Pack of ten 7/16" BSF nyloc nuts, 45/64"(17.8mm) across flats, 0.52"(13.2mm) high.

Price: 1.90 (2.28 Including VAT at 20%)




People who bought this item also bought:
1. Pack of 10 7/16" BSF Plain Nuts (Ref: 594104x10)
Pack of 10 7/16
Pack of 10 1/2" BSF Nyloc Nuts Ref: 251324x10
Pack of ten 1/2" BSF nyloc nuts, 13/16"(20.5mm) across flats, 0.66"(16.8mm) high.

Price: 2.70 (3.24 Including VAT at 20%)



Pack of 10 1/2

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Fuel Tank Sender Wrench

Fuel Tank Sender Wrench

51.44

Application: Defender TD5, Discovery 2, Freelander 1 and Range Rover 38A.

Description: Wrench for removing the fuel tank sender/pump unit. On these models the sender unit (which incorporates fuel pump in most cases) is retained by a large plastic threaded ring. This is difficult to remove without damage unless this tool is used.

Approximate dimensions: Overall diameter: 140mm(5.5"), inside diameter 115mm(4.5").

Equivalent to Land Rover tool number: LRT-19-009 and 310-118

find out more

Clutch Alignment Tool

Clutch Alignment Tool

13.24

Application: Defender 2007>2016 with Puma TDCi engine.

Description: Tool for centering clutch plate to flywheel.

Approximate dimensions: overall length 20cm(7.8"), end diameter 15mm(0.6") x 24.5mm(0.96") long, body diameter 22.6mm(0.89") x 61mm(2.4") long.

Equivalent to Land Rover tool number: 308-419.

find out more

Timing Pins - TD5

Timing Pins - TD5

9.79

Application: Defender with TD5 engine, Discovery Two with TD5 engine.

Description: Laser kit comprising camshaft locking pin and crankshaft locking pin. Supplied with basic instructions for use.

Approximate dimensions: Crank pin overall length 65mm(2.6"), diameter 7.7mm(0.3"). Camshaft pin overall length 90mm(3.5"), end of pin 8mm(0.31")

Equivalent to Land Rover tools: LRT-12-058 and LRT-12-158

find out more

Remover - Diesel Injection Pump -BMW

Remover - Diesel Injection Pump -BMW

19.20

Application: Range Rover 38A (1994- 2001) fitted with BMW 2.5 diesel engine.

Description: Tool to remove fuel injection pump from BMW diesel engine. It also holds drive gear for pump in position until pump is replaced.

Equivalent to BMW tool number: 13-5-120 and Land Rover tool number: LRT-12-119

Approximate dimensions: Bolt - overall length 74mm (2.9"), head 19mm(3/4") acrossflats. Body - overall length 56mm(2.2"), overall diameter 31.5mm(1.24"), hex 22mm(0.9") across flats

find out more

Set of 8 Whitworth Combination Spanners

Set of 8 Whitworth Combination Spanners

27.00

Set of eight Whitworth combination spanners for use on early Land Rovers (these sizes also crop up on some later vehicles in odd corners).
Sizes are - 1/8",3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 9/16". Supplied in tool roll.

Approximate dimensions: spanner lengths vary from 13cm(5.1") for the 1/8 spanner to 30cm(11.8") for the 9/16 spanner.

find out more

27mm Wheel Nut Socket

27mm Wheel Nut Socket

3.82

Application: Late Series 2A, Series 3, Range Rover Classic, Defender and Discovery 1.

Description: 6 point impact socket x 1/2" drive to fit 27mm(1 1/16") wheel nuts. ZZLAS1343 breaker bar is the ideal partner for this socket.

Approximate dimensions: overall length 42mm(1.65"), overall diameter 38mm(1.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -