Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Wiper Motor with switch Ref: ZZS14602
Application: Series 1 and Series 2 with twin wiper motors.
Description: Affordable replacement 12volt 4amp wiper motor. Functional but not cosmetically correct. This motor has a 8mm(0.31") diameter shaft 63mm(2.5") long. Through this projects a 6mm(0.24") diameter spindle which rotates through an arc of 110 degrees.

Price: 63.54 (76.25 Including VAT at 20%)



Wiper Motor with switch
Wiper Motor Ref: RTC3867
Application: Late Series 2A, Series 3, Range Rover Classic rear, Defender to 2001.

Description: Replacement wiper motor supplied with parking switch but NOT with gear and link arm. 12 volt, 14 watt

Price: 52.72 (63.26 Including VAT at 20%)



Wiper Motor
Wiper Drive Cable Ref: RTC202
Application: Series 3 and Defender to 2001.

Description: Genuine wiper drive cable (also know as wiper rack).

Approximate dimensions: Overall length 1.51m(5').

Price: 15.85 (19.02 Including VAT at 20%)



Wiper Drive Cable
Wiper Wheel Box Ref: PRC8495
Application: Series 3 and early Defender.

Description: UK made wheel box for wiper system.

Approximate dimensions: Mounting centres 60.5mm(2.4"), length 94mm(3.7"). width 74.5mm(2.9").

Price: 18.00 (21.60 Including VAT at 20%)



Wiper Wheel Box
Spindle - Wiper Wheel Box Ref: 605904
Application: Late Series 2A and Series 3.

Description: Spindle and wheel for wiper wheel box. Supplied with wiper arm adaptor and spindle seal.

Approximate dimensions: Overall length 91mm(3.6"), wheel diameter 30.6mm(1.2").


Price: 7.50 (9.00 Including VAT at 20%)



Spindle - Wiper Wheel Box
Adaptor for Wiper Arm Ref: STC987D
Application: Defender, Series 3 with modification.

Description: Replacement adaptor piece between wheelbox spindle and wiper arm, also known as 'splined drum'. Will also fit Series 3 if a flat is filed on to the spindle shaft. Supplied with grub screw.

Approximate dimensions: Length 20mm(0.8"), overall diameter 19mm(0.75").


Price: 1.80 (2.16 Including VAT at 20%)



Adaptor for Wiper Arm
Motor and Linkage Set Ref: DLB500080
Application: Freelander One RHD, Discovery Three, Range Rover Sport.
Description: Original Equipment wiper motor and linkage set for windscreen on right hand drive vehicles.
Approximate dimensions: 55cm(21.7") spindle bto spindle.
Original part numbers: DLB101500 and DLB000020

Price: 139.95 (167.94 Including VAT at 20%)



Motor and Linkage Set
Universal Wash Bottle Kit Ref: ZZWB1
Application: Series1, 2 & 3.
Description: Universal wash bottle kit comprising; bottle with electric pump, 2x jets, switch, wiring and tubing.

Price: 28.17 (33.80 Including VAT at 20%)



Universal Wash Bottle Kit
Manual Washer Pump Ref: RTC3639
Application: Series 2/2A.
Descrition: New old stock genuine manual washer pump.
Approximate dimensions: Overall length 93mm(3.7"), to fit 5/8"(16mm) diameter hole, 25mm(1") projection from front of dash.

Price: 11.72 (14.06 Including VAT at 20%)




People who bought this item also bought:
1. Lock Nut for Hub Bearing (Ref: FRC8700D)
2. Heater Control Valve (Ref: 88G588L)
3. Clip for Handbrake Expander Unit (Ref: 515927)
Manual Washer Pump
Washer Jet - Single Nozzle Ref: DRC1021
Application: Original fit Light Weight Land Rover.
Description: Single nozzle washer jet for Light Weight Land Rover, but also would suit many other vehicles.
Approximate dimensions: Overall length 28.5mm(1.1"), projection 13mm(0.5"), head 16mm(0.6") by 14mm(0.55"), mounting hole diameter 8.5mm(0.3")

Price: 3.00 (3.60 Including VAT at 20%)



Washer Jet - Single Nozzle
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -