Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2  3  4  5  ...   >   >>
Remover/Replacer Hub Ref: 204-506
Application: Discovery 3/4, Range Rover Sport and Range Rover 3 (L322).
Description: Kit of 11 tools for removing and replacing front and rear wheel hubs.

Old part number: LRT-60-030

Price: 299.58 (359.50 Including VAT at 20%)



Remover/Replacer Hub
Remover/Installer Lower Arm Rear Bush Ref: 204-535
Application: Discovery 3/4.
Description: Set of mandrels for use with press for removing and installing the rear bush on front suspension lower arm.

Price: 413.84 (496.61 Including VAT at 20%)



Remover/Installer Lower Arm Rear Bush
Remover/Installer Lower Arm Front Bush Ref: 204-536
Application: Discovery 3/4.
Description: Set of mandrels for use with press for removing and installing the front bush on front suspension lower arm.

Price: 153.76 (184.51 Including VAT at 20%)



Remover/Installer Lower Arm Front Bush
Ride Height Setting Tool Ref: 204-557B
Application: Discovery 3 and Range Rover Sport.

Description: Tool for setting the ride height for both front and rear suspension.

Approximate dimensions: overall length 65cm (25.6")

Price: 271.05 (325.26 Including VAT at 20%)



Ride Height Setting Tool
Wrench Anti Roll Bar Fixings Ref: 204-703
Application: Discovery 3, Discovery 4 and Range Rover Sport with Active Cornering Enhancement.
Description: Special wrench to access fixings for front anti roll bar.
Approximate dimensions: 1/2" square drive, opening 123mm(4.8"), throat depth 170mm(6.7")

Price: 73.40 (88.08 Including VAT at 20%)




People who bought this item also bought:
1. Wrench Anti Roll Bar Fixings (Ref: 204-705)
Wrench Anti Roll Bar Fixings
Wrench Anti Roll Bar Fixings Ref: 204-705
Application: Discovery 3, Discovery 4 and Range Rover Sport with Active Cornering Enhancement.
Description: Special wrench to access fixings for front anti roll bar.
Approximate dimensions: 1/2" square drive, opening 128mm(5"), throat depth 90mm(3.5")

Price: 78.10 (93.72 Including VAT at 20%)




People who bought this item also bought:
1. Wrench Anti Roll Bar Fixings (Ref: 204-703)
Wrench Anti Roll Bar Fixings
Ball Joint Splitter Ref: JLR-204-793
Application: Discovery 4 suspension and possiibly other models.

Description: Heavy duty ball joint splitter.

Approximate dimensions: 22cm( 8.7") x 17cm(6.7") x 5cm(2")

Price: 147.40 (176.88 Including VAT at 20%)



Ball Joint Splitter
Preload Gauge Ref: 205-067
Application: Universal.
Description: Preload guage graduated in 0.25Nm divisions from 0 to 6Nm. Has male 1/2"square drive on reverse side. Various uses including pretensioning of timing belts.
Approximate dimensions: Arm length 19cm(7.5") from centre of tool.

Price: 271.19 (325.43 Including VAT at 20%)



Preload Gauge
Installer Axle Shaft Seal Ref: 205-863
Application: Freelander 2 (LR 2) and Evoque.

Description: Installer for half-shaft seal.

Approximate dimensions: Overall length 31cm(12.2"), overall diameter 74mm(2.9").

Price: 71.65 (85.98 Including VAT at 20%)



Installer Axle Shaft Seal
Installer Pinion Oil Seal Ref: JLR-205-865
Application: Freelander 2 and Evoque.

Description: Installer for the pinion oil seal of the rear differential. Use with 307-520 handle/striker shaft..

Approximate dimensions: Overall diameter 92mm(3.62"), internal diameter 28mm(1.1"), lrngth 35mm(1.38").

Price: 47.88 (57.46 Including VAT at 20%)



Installer Pinion Oil Seal
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -