Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5  ...   >   >>
Remover Camshaft Seals Ref: 303-1118
Application: TDV^ fitted to Discovery 3, Discovery 4 and Range Rover Sport.

Description: Tool kit in 4 parts for removing front and rear seals from camshafts.

Approximate dimensions: Overall length 62.5mm(2.46"), body diameter 32mm(1.26").

Price: 85.38 (102.46 Including VAT at 20%)



Remover Camshaft Seals
Installer Camshaft Seal Ref: 303-1119
Application: TDV6 engines in Discovery 3, Discovery 4 and Range Rover Sport.

Descrition: Tool for installing camshaft seals.

Approximate dimensions: Overall diameter 60mm(2.36"), internal diameter 12.5mm(0.5"), height 28mm(1.1").

Price: 34.89 (41.87 Including VAT at 20%)



Installer Camshaft Seal
Remover Crankshaft Front Seal Ref: 303-1120
Application: TDV6 - 3 litre as fitted to Discovery 3, Discovery 4, Range Rover Sport and Range Rover L322.

Description: Tool for removing crankshaft front seal whilst front cover remains in position.

Approximate dimensions: Main body - outside diameter 48mm(1.9"), length 89mm(3.5"), hex 30mm(1.18") across flats. Force screw - overall length 69mm(2.72"), head 27mm(1.06") across flats, thread diameter 18mm(0.71"). Thrust pad - overall length 34mm(1.34"), thread 13.5mm(0.53"), head diameter 35mm(1.38").

Price: 129.96 (155.95 Including VAT at 20%)



Remover Crankshaft Front Seal
Installer Crank Seal Ref: 303-1121A
Application: Discovery 3, Discovery 4, Range Rover L322 and Range Rover Sport when fitted with the 2.7TDV6 or the 3.0TDV6 engine.

Description: Installer for crankshaft front oilseal. Used with guide 303-1122

Approximate dimensions: Overall diameter 60mm( 2.36"), internal diameter 35mm(1.38"), overall length 60mm(2.36")

Price: 49.36 (59.23 Including VAT at 20%)



Installer Crank Seal
Guide for Crank Seal Ref: 303-1122
Application: Discovery 3, Discovery 4, Range Rover L322 and Range Rover Sport when fitted with the 2.7TDV6 or the 3.0TDV6 engine.

Description: Guide for installing crankshaft front oilseal. Used with 303-1121A.

Approximate dimensions: Overall length 97mm(3.82"), mainbody diameter 36mm(1.42")

Price: 105.15 (126.18 Including VAT at 20%)



Guide for Crank Seal
Flywheel Locking Tool Ref: 303-1123
Application: Discovery 3, Discovery 4, Range Rover L322 and Range Rover Sport when fitted with the 2.7TDV6 or the 3.0TDV6 engine.

Description: Flywheel locking tool.

Approximate dimensions: Overall length 18cm(7.1"), height 5cm(2")

Price: 153.26 (183.91 Including VAT at 20%)



Flywheel Locking Tool
Pins, Timing Cam Pulleys Ref: 303-1126
Application: Discovery 3 and Range Rover Sport with TDV6 2.7litre diesel engine.
Description: Pair of pins to set camshaft front sprockets in position.

Price: 64.06 (76.87 Including VAT at 20%)



Pins, Timing Cam Pulleys
Installer Crankshaft Trigger Wheel Ref: 303-1130
Application: Discovery 3, Discovery 4 and Range Rover Sport when fitted with the TDV6 engine.

Description: Tool for installing the crankshaft trigger wheel.

Approximate dimensions: Overall diameter 12.5cm(4.9")

Price: 217.98 (261.58 Including VAT at 20%)



Installer Crankshaft Trigger Wheel
Checking Pin Ref: 303-1132
Application: Discovery 3 and Range Rover Sport with TDV6 2.7litre diesel engine.
Description: Pin to check timed position of camshaft sprockets.

Price: 26.24 (31.49 Including VAT at 20%)



Checking Pin
Viscous Fan Nut Wrench Ref: 303-1142
Application: Discovery3, Range Rover 3 and Range Rover Sport with either TDV6 diesel or V8 petrol engine.
Description: Wrench for nut on viscous unit (36mm across flats), used inconjunction with 303-1143 for TDV6 or 303-1167 for V8 petrol.
Approximate dimensions: overall length 65cm

Price: 113.33 (136.00 Including VAT at 20%)





Related products:
1. Holding Tool for Viscous Fan (Ref: 303-1143)
Viscous Fan Nut Wrench
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -