Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

11.04

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.30

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Driveline > Swivel Housings and Front Axle Parts
Page:  1  2   >   >>
Replacement Swivel Pin Kit for S2A & S3 Ref: SWIVELPINKIT02
Application: Series 2A from mid 1960s with non-pendent ball joints and Series 3 (except 109 V8).
Description: Kit to rebuild one swivel housing. Contians top pin, bush and thrust washer, Timken (or NTN depending on availability) bottom bearing, swivel seal, gasket to axle tube, 'O' ring for bottom pin, 4x lock tabs and 7x assorted shims.

Price: 28.00 (33.60 Including VAT at 20%)



Replacement Swivel Pin Kit for S2A & S3
Replacement Swivel Housing S1, S2a & S3 Ref: 539741D
Application: Series 1, Series 2 & 2A, Series 3 (except 109 V8).

Description: Replacement swivel housing for front axle with chrome finish.

Original part number: 234789.


Price: 91.25 (109.50 Including VAT at 20%)




People who bought this item also bought:
1. Rear Oilseal for Crankshaft (Ref: 275807)
2. Insulation Block for Solex 32PBI-2 (Ref: 212232)
3. Needle Valve Float Chamber (Ref: 260164)
Replacement Swivel Housing S1, S2a & S3
Gaiter Kit for Swivel Housings Ref: 276954D
Application: Series 1, Series2, Series 2A and Series 3.

Description: Replacement pair of leather gaiters and fixing kit for the swivel housings on the front axle. Protect your swivel housings from road salt and other forms of corrosion.




Price: 15.85 (19.02 Including VAT at 20%)




People who bought this item also bought:
1. Seal Kit for Brake Master Cylinder (Ref: ZZSP1975-5)
2. Diaphragm Kit for Solex 32PBI-2 (Ref: ZZB17453)
3. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
Gaiter Kit for Swivel Housings
Replacement Swivel Pin Kit for Range Rover Classic Ref: SWIVELPINKIT03
Application: Range Rover Classic to June 1985. Where six bolts hold swivel housing to axle tube.

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; pair of Timken swivel bearings, 12.5mm thick swivel seal, inner seal, bottom pin gasket, gasket swivel to axle tube, 2x lockers and 7x assorted shims.


Price: 39.73 (47.68 Including VAT at 20%)



Replacement Swivel Pin Kit for Range Rover Classic
Replacement Swivel Pin Kit for Classic and Discovery 1 Ref: SWIVELPINKIT04
Application: Range Rover Classic from July 1985 on except for ABS. Discovery 1 to chassis # JA032849. Where seven bolts hold swivel housing to axle tube.

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; pair of Timken swivel bearings, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket swivel to axle tube, 2x lockers and 7x assorted shims.


Price: 40.11 (48.13 Including VAT at 20%)




People who bought this item also bought:
1. Classic Range Rover Hub Bearing Kit (Ref: WHEELBRGKIT03)
2. Lock Nut for Hub Bearing (Ref: FRC8700D)
Replacement Swivel Pin Kit for Classic and Discovery 1
Replacement Swivel Pin Kit Range Rover Classic with ABS Ref: SWIVELPINKIT05
Application: Range Rover Classic from approx 1986 to 1995 with ABS (advanced braking system). Where seven bolts hold swivel housing to axle tube.

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; top swivel pin with seal and retainer for ABS sensor, top swivel pin bush, thrust washer for top pin, one Timken swivel bearing, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket swivel to axle tube and 7x assorted shims.


Price: 47.13 (56.56 Including VAT at 20%)



Replacement Swivel Pin Kit Range Rover Classic with ABS
Replacement Swivel Pin Kit for Discovery 1 with ABS Ref: SWIVELPINKIT06
Application: Discovery 1 to 1997 with ABS (advanced braking system).

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; top swivel pin with seal and retainer for ABS sensor, top swivel pin bush, thrust washer for top pin, one Timken swivel bearing, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket swivel to axle tube and 7x assorted shims.


Price: 45.78 (54.94 Including VAT at 20%)



Replacement Swivel Pin Kit for Discovery 1 with ABS
Replacement Swivel Pin Kit for Defender Ref: SWIVELPINKIT07
Application: Defender including 110, 130 and 90 to 1994. Models with rear drum brakes.

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; top swivel pin, top swivel pin bush, thrust pad for top pin, one Timken swivel bearing, 9mm thick swivel seal and backing gasket, inner seal, bottom pin gasket, gasket swivel to axle tube and 7x assorted shims.


Price: 37.16 (44.59 Including VAT at 20%)



Replacement Swivel Pin Kit for Defender
Replacement Swivel Pin Kit for Defender Ref: SWIVELPINKIT08
Application: Defender 90, 110 and 130 from 1995 to 2000. With identical top and bottom swivel bearings.

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; pair of Timken swivel bearings, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket to axle tube and 7x assorted shims.


Price: 35.90 (43.08 Including VAT at 20%)



Replacement Swivel Pin Kit for Defender
Replacement Swivel Pin Kit for Defender - non ABS Ref: SWIVELPINKIT09
Application: Defender 90, 110 and 130 from approx 2001. Models where top swivel pin acts as inner race for top bearing. Models without ABS

Description: Kit of replacement parts to overhaul one swivel assembly. Kit contains; top swivel pin, top swivel bearing, lower Timken swivel bearing, 9mm thick swivel seal, inner seal, bottom pin gasket, gasket to axle tube and 7x assorted shims.


Price: 37.27 (44.72 Including VAT at 20%)



Replacement Swivel Pin Kit for Defender - non ABS
Digital Dispensary > REGULAR Service and Repair Parts > Driveline > Swivel Housings and Front Axle Parts
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Red Rotor Arm for 6 cylinder Distributor

Red Rotor Arm for 6 cylinder Distributor

7.20

Application: Series 2A and Series 3, 6 cylinder petrol with Lucas 25D6 distributor and Lucas 45D6.

Description: Replacement rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Previous part numbers: GRA102, 262704

Lucas Part number: 418726

find out more

Red Rotor Arm for Lucas 45D

Red Rotor Arm for Lucas 45D

7.20

Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 20mm (0.79 inches)

Lucas part number: 54422803
find out more

Red Rotor Arm for Lucas 25D

Red Rotor Arm for Lucas 25D

7.20

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines. Also applicable to the DM2 distributor to Series 1 1954 to 1958.

Description: Reproduction rotor arm. Modelled on the original, dependable 1960's design, but made from modern materials on the latest machinery to very close tolerances.
These 100% LUCAS COMPATIBLE RED ROTOR ARMS* will not let you down.
The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.
The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.
The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.

Approximate dimensions: shaft diameter 14.5mm (0.57 inches), height 16.5mm (0.65 inches)

Lucas part number: 460051
find out more

Vacuum Unit - 25D type

Vacuum Unit - 25D type

69.60

Application: Series 2A 1958 to 19566with Lucas 25D distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the 25D distributor. This is the early type with threaded connection for the vacuum pipe.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part number: 54411598

find out more

Vacuum Unit - DM2 type

Vacuum Unit - DM2 type

69.60

Application: Series 1 1954 to 1958 with Lucas DM2 distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the DM2 (40504A) distributor.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part numbers: 421943 and 54411727



find out more

Pair of Clips for Distributor Cap

Pair of Clips for Distributor Cap

12.00

Application: Lucas 25D 4 cylinder ditributor as used on Series 2, Series 2A and Series 3.

Description: Nicely made reproduction clips for distributor cap. Sold as a pair.

Approximate dimensions: Overall length 77mm(3"), width 9mm(0.35")

Lucas part number: 421824

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -