Dingocroft Suspension Freelander

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Freelander 1 Parts > Suspension Freelander

Mounting Bush for Front Anti-roll Bar Ref: RBX101240
Application: Freelander 1 up to chassis number -YA999999.
Description: Genuine bush to locate anti-roll bar to chassis of Freelander. Usually fitted in pairs.
Approximate dimensions: length 36.5mm(1.4"), width 36.5mm(1.4"), inside diameter 21mm(0.8")
Price: £5.61 (£6.73 Including VAT at 20%)

Mounting bush for Front Anti-roll Bar Ref: RBX000010
Application: Freelander 1 from chassis number -1A000001.
Description: Genuine bush to locate anti-roll bar to chassis of Freelander. Same dimensions as RBX101240, but stiffer. Usually fitted in pairs.
Approximate dimensions: length 36.5mm(1.4"), width 36.5mm(1.4"), inside diameter 21mm(0.8")
Price: £3.33 (£4.00 Including VAT at 20%)

Link Anti-Roll Bar Ref: RBM100172
Application: Freelander One 1996 to 2006.
Description: Link for front anti-roll bar. See next two products for fixing nuts, one M10 and one M12.
Price: £17.55 (£21.06 Including VAT at 20%)

Flanged Nut M10 Ref: FX110047L
Application: Many including anti-roll bar link on Freelander One.
Description: M10 flanged locking nut.
Approximate dimensions: spanner size 15mm, overall diameter 21mm(0.83"), height 11mm(0.43")
Price: £0.35 (£0.42 Including VAT at 20%)

M12 Nyloc Nut Ref: ANR5116
Application: Many including anti-roll bar link on Freelander One.
Description: M12 nyloc nut.
Approximate dimensions: 19mm(0.75") across flats, 12mm(0.47") high.
Price: £1.25 (£1.50 Including VAT at 20%)

Genuine Bush for Longitudinal Link Ref: RGX101000
Application: Freelander One 1996 to 2006.
Description: Bush at chassis end of the longitudinal link to rear wheel hub carrier.
Approximate dimensions: overall length 55mm(2.2"), overall diameter 50.5mm(2"), bore diameter 12mm(0.47")
Bush location image
Price: £12.40 (£14.88 Including VAT at 20%)

Replacement Bush for Longitudinal Link Ref: RGX101000D
Application: Freelander One 1996 to 2006.
Description: Bush at chassis end of the longitudinal link to rear wheel hub carrier.
Approximate dimensions: overall length 55mm(2.2"), overall diameter 50.5mm(2"), bore diameter 12mm(0.47")
Bush location image
Price: £3.80 (£4.56 Including VAT at 20%)

Genuine Bush in Rear Hub Ref: RGX101010
Application: Freelander One 1996 to 2006.
Description: Suspension bush in rear hub carrier.
Approximate dimensions: overall length 40mm(1.57"), outside diameter 40mm(1.57"), inside diameter 12mm(0.47")
Bush location image
Price: £22.34 (£26.81 Including VAT at 20%)

Replacement Bush for Rear Hub Ref: RGX101010d
Application: Freelander One 1996 to 2006.
Description: Suspension bush in rear hub carrier.
Approximate dimensions: overall length 40mm(1.57"), outside diameter 40mm(1.57"), inside diameter 12mm(0.47")
Bush location image
Price: £5.75 (£6.90 Including VAT at 20%)

Genuine Bush Rear Suspension Ref: RGX101020
Application: Freelander One 1996 to 2006.
Description: Outer bush on rear lower link and both ends of adjustable link.
Approximate dimensions: overall length 45mm(1.77"), outside diameter 34.5mm(1.36"), inside diameter 12mm(0.47")
Bush location image
Price: £7.17 (£8.60 Including VAT at 20%)

Replacement Bush on Rear Suspension Ref: RGX101020d
Application: Freelander One 1996 to 2006.
Description: Outer bush on rear lower link and both ends of adjustale link.
Approximate dimensions: overall length 45mm(1.77"), outside diameter 34.5mm(1.36"), inside diameter 12mm(0.47")
Bush location image
Price: £2.65 (£3.18 Including VAT at 20%)

Genuine Bush for Bottom Link Ref: RGX101440
Application: Freelander One 1996 to 2006.
Description: Bush for inner end of lwer link on rear suspension.
Approximate dimensions: overall length 50mm(2"), outside diameter 44.5mm(1.75"), bore diameter 12mm(0.47")
Bush location image
Price: £11.65 (£13.98 Including VAT at 20%)

Replacement Bush for Bottom Link Ref: RGX101440D
Application: Freelander One 1996 to 2006.
Description: Bush for inner end of lwer link on rear suspension.
Approximate dimensions: overall length 50mm(2"), outside diameter 44.5mm(1.75"), bore diameter 12mm(0.47")
Bush location image
Price: £3.80 (£4.56 Including VAT at 20%)

Polybush set for Freelander Ref: ZZPOLYBUSHSET69
Full kit of bushes covering anti-roll bar, radius arms, lower link, front and rear wishbones.
Only available in the one set which includes composite bushes and different formulations for different functions.
Application: Freelander from 1998
Price: £158.31 (£189.97 Including VAT at 20%)

Fixings kit for Set 69 - Freelander Ref: ZZPOLYBUSHSET69FIX
The set of nuts, bolts and washers for fitting Polybush Set69 (Freelander 1998 on).
Lets you do a 'complete' job when fitting your new Polybush set. Rather than using tired and worn fixings, this set compliments the Polybushes with exact fit new fixings to give you complete peace of mind.
Price: £70.77 (£84.92 Including VAT at 20%)

Polybush Kit for Rear Suspension Ref: ZZPOLYBUSHKIT1XQ
Application: Freelander One 1996 to 2006.
Description: Set of 6 bushes equivalent to RGX101020
Bush location image
Price: £44.76 (£53.71 Including VAT at 20%)

Digital Dispensary > Freelander 1 Parts > Suspension Freelander

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO