Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAMPS and Electrical Items > Series2, Series3 and Defender Lighting
Page:  1  2   >   >>
Front Side Lamp - Wipac Ref: RTC5012
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with clear lens. No bulb included. Wires, one black and one red.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.05 (4.86 Including VAT at 20%)




People who bought this item also bought:
1. Bulb Holder - Push-In (Ref: ZZAS612)
2. Nut - Steering Column (Ref: 552804)
Front Side Lamp - Wipac
Front Indicator Lamp - Wipac Ref: RTC5013
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with amber lens. No bulb included. Wires, one black and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.05 (4.86 Including VAT at 20%)



Front Indicator Lamp - Wipac
Stop/Tail Lamp - Wipac Ref: RTC5523
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with red lens. No bulb included. Wires, one black, one red and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.95 (5.94 Including VAT at 20%)



Stop/Tail Lamp - Wipac
Rear Indicator Lamp - Wipac Ref: RTC5524
Application: Series 3 and Defender to 1994.

Description: L E Perei branded lamp with amber lens but no bulb. Wires - one black and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 37cm(14.6").

Price: 3.75 (4.50 Including VAT at 20%)




People who bought this item also bought:
1. Rear Lamp (Ref: 589446)
2. Rear Reflector (Ref: 551595)
3. Bonnet Rest Strip (Ref: 300824A)
Rear Indicator Lamp - Wipac
Rear Lamp Ref: 589446
Application: Series 2/2A and early Series 3

Description: Replacement rear lamp, red lens with clear window for number plate illumination. With reflector in centre.

Approximate dimensions: Overall diameter 78mm(3.1"), height 37mm(1.5")

Price: 4.50 (5.40 Including VAT at 20%)




People who bought this item also bought:
1. Rear Indicator Lamp - Wipac (Ref: RTC5524)
2. Rear Reflector (Ref: 551595)
3. Bonnet Rest Strip (Ref: 300824A)
Rear Lamp
Number Plate Lamp Ref: XFC100550
Application: Series 2A, Series 3 and Defender.

Description: UK made rear number plate lamp. Supplied with 2 bulbs.

Approximate dimensions: Length 11cm(4.3"), depth 5cm(2"), width 4cm(1.6").

Price: 9.22 (11.06 Including VAT at 20%)



Number Plate Lamp
Rear Reflector Ref: 551595
Application: Series 3.

Description: Red rear reflector UK made. With fixing stud and nut.

Approximate dimensions: Overall diameter 59.4mm(2.3"),

Price: 3.30 (3.96 Including VAT at 20%)




People who bought this item also bought:
1. Rear Indicator Lamp - Wipac (Ref: RTC5524)
2. Rear Lamp (Ref: 589446)
3. Bonnet Rest Strip (Ref: 300824A)
Rear Reflector
Lens Military Stop/Tail Lamp Ref: 600858
Application: Series 2, 2A & 3 military models.
Description: Lucas glass screw-in red lens.
Approximate dimensions: Overall diameter 64.5mm(2.5") height 39mm(1.5")

Price: 6.00 (7.20 Including VAT at 20%)



Lens Military Stop/Tail Lamp
Lens - Indicator Lamp Ref: STC319
Application: Series 2 and Series 3.

Description: Indicator lamp lens.

Approximate dimensions: Overall diameter 70mm(2.75"), height 36mm(1.4").

Original part number: 542048

Price: 2.50 (3.00 Including VAT at 20%)



Lens - Indicator Lamp
Lens Sidelamp Ref: 589284D
Application: Series 3 and Defender to 1994.

Description: Clear lens for sidelamp - non genuine.

Approximate dimensions: Diameter 68mm(2.7"), height 38.5mm(1.5").

Price: 1.50 (1.80 Including VAT at 20%)



Lens Sidelamp
Digital Dispensary > LAMPS and Electrical Items > Series2, Series3 and Defender Lighting
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -