Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Brake Parts
Page:   <<   <  1  2  3  4  5   >   >>
Seal Kit - front wheel cylinders Ref: 275744
Application: Series 1, 2 & 3.
Description: Replacement seal kit for pair of 1.25" bore wheel cylinders. Contains 4 cup seals for pistons, 4 dust seals for cylinder ends and 2 dust caps for bleed screws. Suits cylinders 243296 and 243297.

Price: 2.50 (3.00 Including VAT at 20%)




People who bought this item also bought:
1. Pack of 10 Male Unions for 3/16" Pipe (Ref: ZZHU0110)
2. Clutch Hose and Fittings (Ref: RTC5940DKIT)
3. Pair of Replacement Brake Hoses Series 3 (Ref: RTC5903DKIT)


Related products:
1. Cylinder Hones - Brakes (Ref: ZZLAS2243)
2. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Seal Kit - front wheel cylinders
Lockheed Delphi Wheel Cylinder S1, S2A & S3 Ref: 243302D
Application: 88 inch wheel base rear right hand to 1980. Used in 10 inch drums.

Description: Cast iron wheel cylinder by Lockheed Delphi. Internal bore 25mm (1 inch), length 84mm (3.3 ionches). NB on early vehicles this cylinder was used on the left hand rear drum.

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Lockheed Delphi Wheel Cylinder S1, S2A & S3 (Ref: 243303D)
2. Replacement Propshaft Gaiter Kit (Ref: 276484D)
3. Rubber Boot for Steering Ball Joint (Ref: 214649)
Lockheed Delphi Wheel Cylinder S1, S2A & S3
Lockheed Delphi Wheel Cylinder S1, S2A & S3 Ref: 243303D
Application: 88 inch wheel base rear left hand to 1980. Used in 10 inch drums.

Description: Cast iron wheel cylinder by Lockheed Delphi. Internal bore 25mm (1 inch), length 84mm (3.3 ionches). NB on early vehicles this cylinder was used on the right hand rear drum.

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Lockheed Delphi Wheel Cylinder S1, S2A & S3 (Ref: 243302D)
2. Replacement Propshaft Gaiter Kit (Ref: 276484D)
3. Rubber Boot for Steering Ball Joint (Ref: 214649)
Lockheed Delphi Wheel Cylinder S1, S2A & S3
Replacement Seal Kit for Wheel Cylinders Ref: 266687
Application: Series 1, 2, & 3 with 1" diameter bore wheel cylinders as fitted to rear of 86" & 88" wheel base Land Rovers.
Description: Seal kit for pair of 1" diameter wheel cylinders. Kit contains 4 cup seals, 4 cylinder dust seals and 2 dust caps for bleed screws. Suits 243302 and 243303 wheel cylinders.

Please note that this is now a replacement kit as the Lockheed kit is no longer available.

Price: 2.50 (3.00 Including VAT at 20%)




People who bought this item also bought:
1. Screw for retaining Brake Drums (Ref: 1510)
2. Replacement Propshaft Gaiter Kit (Ref: 276484D)
3. Rubber Boot for Steering Ball Joint (Ref: 214649)


Related products:
1. Cylinder Hones - Brakes (Ref: ZZLAS2243)
Replacement Seal Kit for Wheel Cylinders
Bleed Screw for Wheel Cylinders Ref: 556508
Application: Series 1, 2, & 3.
Description: Bleed screw with conical seat. Suits all Series wheel cylinders (and clutch slave cylinders) except original Series 1 cylinders which had a spherical seat.
Original part number 248909

Price: 0.50 (0.60 Including VAT at 20%)




People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Grommet Series 1 Pedals (Ref: 70620)
3. Grommet - Brake Pipe Support (Ref: 6860L)
Bleed Screw for Wheel Cylinders
Dust Cap for Bleed Screw Ref: 594091
Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Screw for retaining Brake Drums (Ref: 1510)
2. Replacement Seal Kit for Wheel Cylinders (Ref: 266687)
3. Rubber Boot for Steering Ball Joint (Ref: 214649)
Dust Cap for Bleed Screw
Brake Hose Ref: 219824KIT
Application: Series One 1948 to 1953.

Description: Large diameter brake hose for early models with 1/4" diameter brake pipes. This hose has 7/16"UNF threaded ends. Supplied with copper washer, star washer and locking nut.

Overall length 38cm (15").

Price: 22.50 (27.00 Including VAT at 20%)



Brake Hose
Brake Hose Series 1, 2A & S3 Ref: RTC3386=
Application: Series 1 from 1954 to 1958, Series 2A 88" front and rear, Series 2A 109" front, Series 3 88" rear.

Description: Bearmach brand flexible brake hose, overall length 39.5cm (15.6"), thread 3/8UNF.

Price: 10.00 (12.00 Including VAT at 20%)




People who bought this item also bought:
1. Split Pin - Shocker Retention (Ref: 4063A)
2. Rubber Boot for Steering Ball Joint (Ref: 214649)
3. Spring Ring, Boot to Body of Steering Ball Joint (Ref: 214685)
Brake Hose Series 1, 2A & S3
Pair of Brake Hoses S2A & S3 Ref: RTC3386KIT
Application: Series 2A 88" front and rear, Series 2A 109" front.

Description: Pair of Bearmach flexible brake hoses with star washers, retaining nuts and copper sealing washers. Overall length of each hose 39.5cm (15.6"), thread 3/8UNF.

Price: 18.50 (22.20 Including VAT at 20%)





Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Pair of Brake Hoses S2A & S3
Tee Piece Ref: BTB657L
Application: Series 1 from 1954, Series 2/2A and Series 3 to 1980.
Description: Reproduction tee piece in brass to take 3x 3/16" brake pipes with 3/8"UNF threaded unions. Also with mounting hole.
Original part number 234928

Price: 9.64 (11.57 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Set for Gearbox (Ref: 600603KIT)
2. Clevis for Hand Brake Linkage (Ref: 215809)
3. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
Tee Piece
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Brake Parts
Page:   <<   <  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -