Dingocroft Land Rover Series One Steering Parts

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Land Rover Series One Parts > Land Rover Series One Steering Parts

Bush for Rocker Shaft Ref: 261850
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: Old stock bush for rocker shaft in steering box.
Approximate dimensions: outside diameter 29mm (1.14"), inside diameter 25.5mm(12), height 32mm (1.26")
Price: £9.82 (£11.78 Including VAT at 20%)

Joint Washer for End Plate of Steering Box Ref: 271379
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: Joint washer/shim for end plate of steering box.
Approximate dimensions: 61mm (2.4") square, inside diameter 25.5mm(1")
Price: £0.65 (£0.78 Including VAT at 20%)

Fibre Top Bush of Steering Column Ref: 501245
Application: Series 1 88" & 109" and Series 2.
Description: Fibre bush to support top end of inner column in steering column tube.
Approximate dimensions: maximum outside diameter 35mm (1.38"), inside diameter 25.5mm(1"), height 41.5mm(1.63")
Price: £8.50 (£10.20 Including VAT at 20%)

Steel Ball for Main Nut Ref: BLS112L
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: 3/8" diameter steel ball for main recirculating nut of steering box. Set of 12 needed. Also used for selectors in gearbox.
Original part number: 1643
Price: £0.12 (£0.14 Including VAT at 20%)

Locknut for Adjuster Screw Ref: 261874
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: Locknut for adjuster screw on steering box.
Approximate dimensions: 24mm (0.94") across flats, height 7mm (0.28").
Price: £3.25 (£3.90 Including VAT at 20%)

Bearing Cup for Inner Column Ref: 271384
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: Replacement cup for ball bearings that support the inner steering column.
Approximate dimensions: outside diameter 40.5mm(1.6"), inside diameter 24.4mm(0.96"), height 11mm(7/16").
Price: £2.50 (£3.00 Including VAT at 20%)

'O' Ring Seal for Rocker Shaft Ref: 271013
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: O ring seal for rocker shaft to steering box housing.
Approximate dimensions: outside diameter 32.3mm(1.27"), inside diameter 25.4mm(1"), thickness 3.5mm(0.14")
Price: £0.15 (£0.18 Including VAT at 20%)

Gasket Steering Box Side Plate Ref: 515849
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: Replacement gasket for steering box side plate.
Original part number 261880
Price: £1.20 (£1.44 Including VAT at 20%)

Gasket to Steering Box Ref: 261857
Application: Series 1, 2 & 3.
Description: Paper gasker 0.005" thick. Used top and bottom of steering box.
Approximate dimensions: 61mm (2.4") acroos sides, inside diameter 48mm (1.9")
Price: £1.73 (£2.08 Including VAT at 20%)

Nut Droparm to Rocker Shaft Ref: NT612061
Application: Series 1 88" & 109", Series 2 and Series 3.
Description: 3/4" UNF nut to hold steering drop arm to rocker shaft.
Approximate dimensions: 1 1/8"(28.6mm) across flats, 10.5mm (0.41") high.
Price: £1.00 (£1.20 Including VAT at 20%)

Steering Relay Ref: NRC1269D
Application: Series 1, 2 & 3.
Description: Replacement steering relay ( also known as steering idler). Mounted on first chassis cross member.
Price: £19.50 (£23.40 Including VAT at 20%)

Bolt, Steering Relay to Chassis Ref: BX605281
Application: Series 1, 2 & 3.
Description: Bolt high tension 5/16"UNF x 3.5" long. Replaces original BSF bolt.
Original part number 237336
Price: £5.19 (£6.23 Including VAT at 20%)

Thrust Washer for Steering Relay Ref: 241388
Application: Series 1, 2 & 3.
Description: Thrust washer for steering idler.
Approximate dimensions: outside diameter 45mm (1.77"), inside diameter 29mm (1.14")
Price: £3.89 (£4.67 Including VAT at 20%)

Oilseal for Steering Relay Ref: 213340
Application: Series 1, 3 & 3.
Description: Oilseal for top and bottom of steering idler.
Approximate dimensions: outside diameter 39mm (1.54"), inside diameter 27mm (1.06"), depth 7mm (0.28").
Price: £2.55 (£3.06 Including VAT at 20%)

Retainer for Oilseal, Steering Idler Ref: 230294
Application: Series 1, 3 & 3.
Description: Retainer for oilseal and also end cap of steering relay.
Approximate dimensions: outside diameter 62mm (2.44"), inside diameter 32mm (1.26"), depth 10.5mm (0.41").
Price: £12.00 (£14.40 Including VAT at 20%)

Gasket, Retainer to Steering Relay Ref: 90624436
Application: Series 1, 2 & 3.
Description: Paper joint washer between oil seal retainers and body of steering relay.
Approximate dimensions: inside diameter 46mm (1.8").
Original part number 230295
Price: £0.38 (£0.46 Including VAT at 20%)

Spring for Steering Relay Bushes Ref: 230759
Application: Series 1, 2 & 3.
Description: Compression spring for bushes inside steering relay.

Price: £1.00 (£1.20 Including VAT at 20%)

Washer for Spring, Steering Relay Ref: 230760
Application: Series 1, 2 & 3.
Description: washer between spring and thrust washer in steering idler.
Approximate dimensions: outside diameter 45mm (1.77"), inside diameter 36mm (1.42"), thickness 2mm (0.08").
Price: £0.39 (£0.47 Including VAT at 20%)

Split Bush for Steering Relay Ref: 537877
Application: Series 1, 2 & 3.
Description: Split bush for steering idler. Total of 4 in idler, these provide a degree of resistance or damping to the steering system.
Original part number: 230758
Price: £2.50 (£3.00 Including VAT at 20%)

Upper Lever Arm for Steering Relay Ref: 531040
Application: Series 1, 2 & 3.
Description: Upper steering arm from steering relay.
Original part number 242180
Price: £8.00 (£9.60 Including VAT at 20%)

Lower Lever Arm of Steering Relay Ref: 535286
Application: Series 1, 2 & 3.
Description: Lower steering arm from steering relay.
Original part number 270702
Price: £8.00 (£9.60 Including VAT at 20%)

Bolt Fixing Lower Arm to Steering Relay Ref: BX607181
Application: Series 1, 2 & 3,
Description: Bolt 7/16"UNF x 2.25" long. For fixing lower lever arm to steering relay.
Replaces: 215390 BSF and 256465 UNF
Price: £0.80 (£0.96 Including VAT at 20%)

Steering Ball Joint, Right Hand Thread Ref: 608464D
Application: Series 1 and early Series 2.
Description: Steering ball joint ( or track rod end) with right hand thread. Used on track rod, drag link and longitudinal rod. NB these ball joints have shoulder to threaded spindle, whereas later Series 2 and 3 ball joints have thread for full length of spindle.
Original part number 231183.
Price: £12.00 (£14.40 Including VAT at 20%)

Steering Ball Joint, Left Hand Thread Ref: 320902D
Application: Series 1 and early Series 2.
Description: Steering ball joint ( or track rod end) with left hand thread. Used on track rod, drag link and longitudinal rod. NB these ball joints have shoulder to threaded spindle, whereas later Series 2 and 3 ball joints have thread for full length of spindle.
Original part number 231184.
Price: £12.00 (£14.40 Including VAT at 20%)

Rubber Boot for Steering Ball Joint Ref: 214649
Application: Series 1, 2 & 3.
Description: Rubber boot for track rod ends.
Price: £0.85 (£1.02 Including VAT at 20%)

Spring Ring, Boot to Body of Steering Ball Joint Ref: 214685
Application: Series 1, 2 & 3.
Description: Larger retaining ring for rubber boot to body of steering ball joint.
Approximate dimensions: 33mm (1.3") diameter
Price: £0.45 (£0.54 Including VAT at 20%)

Spring Ring retaining Small End of Rubber Boot Ref: 90214684
Application: Series 1, 2 & 3.
Description: Smaller retaining ring for rubber boot to spindle of steering ball joint.
Approximate dimensions: 25mm (1") diameter
Price: £0.45 (£0.54 Including VAT at 20%)

Digital Dispensary > Land Rover Series One Parts > Land Rover Series One Steering Parts

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO