Dingocroft Rover V8 Engine Parts

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Regular Service and Repair Parts > Engine Parts > Rover V8 Engine Parts

Replacement Hydraulic Tappets - set of 16 Ref: ERC4949SET
Set of 16 (full engine set) hydraulic camshaft tappets (also known as cam followers). These are not genuine Land Rover but are to original equipment specification.
Application: all Rover V8 engines from 1972 to 2004.
Price: £48.00 (£57.60 Including VAT at 20%)

Replacement Timing Chain Set Ref: ERC7929DSET
Timing chain, crank wheel and camshaft wheel. These items are of US manufacture.
Application: All Rover V8s from 1972 to 1994.
Price: £17.88 (£21.46 Including VAT at 20%)

Replacement Gasket Set in Black Ref: ERR7306DSET
Set of gaskets comprising Teflon coated valley gasket with seals, 2x silicon rocker box gaskets with longer rocker box fixing screws.
Application: All Rover V8s from 1972 to 2004.
Price: £28.60 (£34.32 Including VAT at 20%)

Composite Head Gasket Pair for 3.5litre Ref: ZZRSAZ744PAIR
Pair of composite head gaskets for 3.5litre V8. 1.00mm (.040") thick.
Application: 3.5litre V8 from 1972 to 1990.
Price: £25.00 (£30.00 Including VAT at 20%)

Composite Head Gasket Pair for 3.9litre V8 Ref: ZZRSAZ900PAIR
Pair of composite head gaskets for 3.9litre V8. 1.20mm (.046") thick.
Application: 3.9litre V8 from 1989 to 1994. Not suitable for the 4.0litre V8.
Price: £28.00 (£33.60 Including VAT at 20%)

Replacement Gasket Exhaust Manifold V8 Ref: ERR6733
Application: 3.9, 4.0 & 4.6 litre V8 engine. Discovery 1, Discovery 2, Range Rover Classic 1989 to 1995, Range Rover 2 (38A).
Description: Gasket for 2 ports of exhaust manifold, not handed. 4 per engine.
Price: £2.95 (£3.54 Including VAT at 20%)

Locker for Exhaust Manifold Ref: ERC7321
Application: All Rover V8 engines.
Description: Locker for bolts retaining exhaust manifold to cylinder head. 4 per cylinder head, 8 per engine.
Price: £0.93 (£1.12 Including VAT at 20%)

Exhaust Manifold Locker Set in Stainless Steel Ref: ERC7321SS
Application: All Rover V8 engines.
Description: Set of lockers for bolts retaining exhaust manifold to cylinder heads. This is an engine set of 8 in stainless steel.
Price: £11.76 (£14.11 Including VAT at 20%)

Gasket Exhaust Manifold to Down pipe Ref: ETC4524
Application: Rover V8 EFi engines 3.5 litre and 3.9 litre. Discovery 1, Range Rover Classic and Defender.
Description: Replacement gasket between exhaust manifold and exhaust downpipe.
Price: £2.00 (£2.40 Including VAT at 20%)

Cylinder Head Bolt Set Ref: ERR29434SET
Application: 4.0 and 4.6 litre engines from approx 1994 onwards. When only 10 bolts were used to hold cylinder head to block.
Description: Genuine bolt set comprising 14x ERR2943 bolt 7/16UNC x 2.6" and 6x ERR2944 bolt 7/16UNC x 3.78". One set fixes 2 cylinder heads.
Price: £33.48 (£40.18 Including VAT at 20%)

Fitting Kit for Exhaust Manifold Ref: EXHMANIFITKIT01
Application: 3.9 V8 engine Discovery 1 and Range Rover Classic.
Description: Full kit of parts to fit manifold to cylinder head and downpipe to manifold.
Price: £22.00 (£26.40 Including VAT at 20%)

Digital Dispensary > Regular Service and Repair Parts > Engine Parts > Rover V8 Engine Parts

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO