Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Filters
Page:  1  2  3   >   >>
Replacement Filter Service Kit for Range Rover 1975 to 1985 Ref: FILTERSRR1CARBR
Replacement filter service kit for Range Rover Classic V8 from 1975 to 1985.

Kit comprises;
oil filter - Coopers Z1159, 2x air filter - Coopers AG410A, Mann petrol fuel filter element P65/1, filter gauze for Facet electric fuel pump and washer for engine sump drain plug.
NB - manufacturer of filters may change depending on availability. However quality will not alter.

Price: 18.85 (22.62 Including VAT at 20%)



Replacement Filter Service Kit for Range Rover 1975 to 1985
Replacement Filter Service Kit for Range Rover Ref: FILTERSRR1EFIR1
Replacement filter service kit for Range Rover Classic Efi from 1986 to 1990 (to GA464553 chassis number). These are vehicles with the steel fuel tank, the fuel filter has 'push on' connections N.B. some vehicles in this range have been converted to 'screw on' connection fuel filter.

Kit comprises;
oil filter - Coopers Z1159, air filter - Coopers AG1120, fuel filter - Lucas FDB101 and washer for engine sump drain plug.
NB - manufacturer of filters may change depending on availability. However quality will not alter.

Price: 12.80 (15.36 Including VAT at 20%)



Replacement Filter Service Kit for Range Rover
Genuine Filter Service Kit for Range Rover Ref: FILTERSRR1EFIG2
Genuine filter service kit for Range Rover Classic Efi from 1990 to 1994 (chassis number HA464553 to LA647644). These are vehicles with the plastic fuel tank, the fuel filter has 'screw on' connections N.B. some vehicles with steel fuel tanks have been converted to 'screw on' connection fuel filter.

Kit comprises;
oil filter, air filter, fuel filter and washer for engine sump drain plug.
NB - manufacturer of filters may change depending on availability. However quality will not alter.

Price: 19.40 (23.28 Including VAT at 20%)



Genuine Filter Service Kit for Range Rover
Replacement Filter Service Kit for Range Rover Ref: FILTERSRR1EFIR2
Replacement filter service kit for Range Rover Classic Efi from 1990 to 1994 (chassis number HA464553 to LA647644). These are vehicles with the plastic fuel tank, the fuel filter has 'screw on' connections N.B. some vehicles with steel fuel tanks have been converted to 'screw on' connection fuel filter.

Kit comprises;
oil filter - Coopers Z1159, air filter - Coopers AG1120, fuel filter - Coopers FIG7010 and washer for engine sump drain plug.
NB - manufacturer of filters may change depending on availability. However quality will not alter.

Price: 9.92 (11.90 Including VAT at 20%)



Replacement Filter Service Kit for Range Rover
Genuine Oil Filter Canister - ERR3340 Ref: ERR3340
Application:
Defender 2.5 petrol, 2.5 diesel naturally aspirated, 2.5 diesel turbo, 200TDi, 300TDI and V8.
Discovery I 200TDi, 300TDi and V8.
Range Rover Classic V8 post approx 1975, 200TDi and 300TDi.
Range Rover 2nd Generation (38A) 4.0 V8 and 4.6 V8.

Approx diamensions: 95mm dia x 106mm long

Price: 5.91 (7.09 Including VAT at 20%)



Genuine Oil Filter Canister - ERR3340
Replacement alternative to ERR3340 Ref: ERR3340D
Coopers oil filter element Z1159 ( Crosland or Fram may be supplied depending on availability)
Application:
Defender 2.5 petrol, 2.5 diesel naturally aspirated, 2.5 diesel turbo, 200TDi, 300TDI and V8.
Discovery I 200TDi, 300TDi and V8.
Range Rover Classic V8 post approx 1975, 200TDi and 300TDi.
Range Rover 2nd Generation (38A) 4.0 V8 and 4.6 V8.

Approx diamensions: 95mm dia x 106mm long

Price: 2.94 (3.53 Including VAT at 20%)



Replacement alternative to ERR3340
Replacement Equivalent to RTC3186 Ref: RTC3186
Mahle oil filter element.

Application: Range Rover V8 1970 to 1975 approx, engine types 341, 355 & 359 up to suffix E inclusive.

Approximate dimensions: 95mm diameter x 105mm long.

Price: 8.63 (10.36 Including VAT at 20%)



Replacement Equivalent to RTC3186
Replacement Equivalent to 605191 Ref: 605191
Application: Range Rover Classic V8 fitted with carburretors (either Sromberg or SU), Discovery 1 V8 fitted with carburretors and some V8 Defenders (but not many!)
You need 2 of these filters per vehicle.

Price: 2.00 (2.40 Including VAT at 20%)



Replacement Equivalent to 605191
Genuine Air Filter Element - ESR1445 Ref: ESR1445
Genuine air filter element.

Application: Discovery 300TDi, Discovery 3.9V8 from MA081991, Range Rover Classic 300TDi, Range Rover Classic 3.9V8 from MA647645

Approx dimensions: 205mm wide x 280mm long x 57mm deep


Price: 5.40 (6.48 Including VAT at 20%)



Genuine Air Filter Element - ESR1445
Replacement Alternative to ESR1445 Ref: ESR1445=
Coopers air filter element AG1103 ( Mann, Fram or equivalent may be supplied depending on availability)

Application: Discovery 300TDi, Discovery 3.9V8 from MA081991, Range Rover Classic 300TDi, Range Rover Classic 3.9V8 from MA647645

Approx dimensions: 205mm wide x 280mm long x 57mm deep


Price: 4.70 (5.64 Including VAT at 20%)



Replacement Alternative to ESR1445
Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Filters
Page:  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -