Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Driveline
Page:  1  2   >   >>
Nut and Bolt Kit for Propshafts Ref: PROPFIX01
Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
2. Replacement Propshaft Gaiter Kit (Ref: 276484D)
3. Shim for Outer Bearing of Diff Pinion, 0.020" (Ref: 233677)
Nut and Bolt Kit for Propshafts
GKN boxed Universal Joint Kit Ref: RTC3346
Application: Late Series 2A, Series 3, Classic Range Rover to 1985 and early 90/110.
Description: GKN Driveline U100 universal joint repair kit including 4 circlips and a grease nipple.
Approximate Dimensions: Distance across faces of joint 82mm (3.23"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").

Price: 9.95 (11.94 Including VAT at 20%)




People who bought this item also bought:
1. Distributor Cap Lucas V8 (Ref: STC8368)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)


Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
GKN boxed Universal Joint Kit
Replacement Universal Joint Kit Ref: RTC3346D
Application: Late Series 2A, Series 3, Classic Range Rover to 1985 and early 90/110.

Description: Replacement universal joint repair kit including 4 circlips and a grease nipple.

Approximate Dimensions: Distance across faces of joint 82mm (3.23"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").

Price: 7.00 (8.40 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Replacement Universal Joint Kit
GKN Heavy Duty Universal Joint Repair Kit Ref: TVC100010=
Application: Defender to 2000 and rear only from 2001 onwards, Classic Range Rover 1985 to 1995, Discovery 1 and Discovery 2.

Description: Hardy Spicer/GKN universal joint repair kit including 4 circlips and a grease nipple. Caps are longer than standard giving greater bearing area.

Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 19mm ( 0.75").

Price: 17.03 (20.44 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
GKN Heavy Duty Universal Joint Repair Kit
GKN boxed Universal Joint Repair Kit Ref: TVC100010D
Application: Defender to 2000 and rear only from 2001 onwards, Classic Range Rover 1985 to 1995, Discovery 1 and Discovery 2.

Description: GKN Driveline U110 universal joint repair kit including 4 circlips and a grease nipple. This kit uses standard length caps.

Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").

Price: 10.49 (12.59 Including VAT at 20%)





Related products:
1. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
GKN boxed Universal Joint Repair Kit
Genuine Propshaft Gaiter Ref: 276484
Application: Series 1, Series 2/2A, Series 3, early 90/110, Classic Range Rover.

Description: Genuine gaiter and 2 clips for sliding joint on front and rear propellor shafts.

Price: 22.58 (27.10 Including VAT at 20%)



Genuine Propshaft Gaiter
Replacement Propshaft Gaiter Kit Ref: 276484D
Application: Series 1, Series 2/2A, Series 3, early 90/110, Classic Range Rover.

Description: Replacement gaiter and 2 clips for sliding joint on front and rear propellor shafts.

Price: 3.00 (3.60 Including VAT at 20%)




People who bought this item also bought:
1. Blanking Gommet for Bell Housing (Ref: 232604)
2. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
3. Lockheed Delphi Wheel Cylinder S1, S2A & S3 (Ref: 243302D)
Replacement Propshaft Gaiter Kit
Classic Range Rover Hub Bearing Kit Ref: WHEELBRGKIT03
Application: Range Rover Classic 1972 to 1985. Suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, single lip and twin lip Gaco inner seals, flange gasket and hub nut locker.

Price: 19.16 (22.99 Including VAT at 20%)



Classic Range Rover Hub Bearing Kit
Hub Bearing Kit - Defender, Discovery and Classic Range Rover Ref: WHEELBRGKIT04
Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.

Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.

Price: 23.03 (27.64 Including VAT at 20%)




People who bought this item also bought:
1. Rotor Arm Lucas V8 (Ref: STC1857)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
Hub Bearing Kit - Defender, Discovery and Classic Range Rover
Locker for Hub Nuts Ref: 217353=
Application: Series 1, 2 & 3. Range Rover Classic and early Defender.
Description: Locker for wheel hub nuts.
Approximate dimensions: outside diameter 64.5mm (2.54"), inside diameter 41.6mm (1.64"), thickness 1.0mm *(0.040")

Price: 0.45 (0.54 Including VAT at 20%)




People who bought this item also bought:
1. Flange Gasket (Ref: 231505=)
2. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
3. Inner Wheel Hub Seal (Ref: RTC3510)
Locker for Hub Nuts
Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Driveline
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -