Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Cooling System
Thermostat 88 degrees Ref: ETC4765
Application: Rover V8 engine, 3.5 litre and 3.9 litre as fitted to Defender, Discovery 1 and Range Rover Classic.

Description: 'Waxstat' 88 degree thermostat from Adwest Western Thomson Ltd

Price: 3.31 (3.97 Including VAT at 20%)



Thermostat 88 degrees
Filler Plug 300TDI Ref: ERR4686B
Application: Defender, Discovery 1 and Range Rover Classic.

Description: Brass plug and 'O' ring to replace original plastic plug. This is used on several radiators and thermostat housing of 300TDi.

Approximate dimensions: Length 25mm(1"), overall diameter 31.2mm(1.23")

Previous part number: NTC4609

Price: 1.95 (2.34 Including VAT at 20%)



Filler Plug 300TDI
Replacement Viscous Unit 2.5Dt & 200TDi Ref: ETC7238=
Replacement viscous unit.

Application: Defender 2.5DT UK & Europe, 200TDI UK & Europe in Defender, Discovery and Classic Range Rover.

Approximate dimensions: overall diameter 15cm, height 5.7cm, left hand thread mounting nut 32mm across flats.

Price: 56.25 (67.50 Including VAT at 20%)



Replacement Viscous Unit 2.5Dt & 200TDi
Replacement Water Pump V8 Ref: STC1611D
Replacement water pump supplied with gasket. Non viscous unit type, fan is bolted directly to pump.

Application: Range Rover Classic carb engines to approx 1980, Defender V8 non air con.

Approximate dimensions: 27cm x 20cm, spindle height 16.5cm.

Price: 24.00 (28.80 Including VAT at 20%)




People who bought this item also bought:
1. Distributor Cap Lucas V8 (Ref: STC8368)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
Replacement Water Pump V8
Replacement Water Pump for V8 EFI Ref: STC483D
Replacement water pump for V8 EFi engines, both 3.5 and 3.9 litre. Supplied with gasket.

Application: Discovery 1 1989 to 1994, Range Rover Classic 1986 to 1994.

Aproximate dimensions: 27.5cm x 20cm , spindle height 14cm

Price: 47.50 (57.00 Including VAT at 20%)



Replacement Water Pump for V8 EFI
Replacement Water Pump for 200TDi Ref: RTC6395D
Replacement water pump for 200TDi engines. Supplied with gasket.

Application: Discovery and Range Rover Classic, NOT Defender.

Approximate dimensions: 27cm x 17cm, spindle height 12.5cm

Price: 45.00 (54.00 Including VAT at 20%)



Replacement Water Pump for 200TDi
Genuine Water Pump 300TDi Ref: PEB500090
Genuine Land Rover water pump with gasket.

Application: 300TDi engine when fitted to Defender, Discovery or Range Rover Classic.

Approximate dimensions: 21.5cm x 12.5cm, spindle height 6cm.

Price: 64.23 (77.08 Including VAT at 20%)



Genuine Water Pump 300TDi
Replacement Water Pump 300TDi Ref: PEB500090=
Application: 300TDi engine when fitted to Defender, Discovery or Range Rover Classic.

Description: Airtex water pump with gasket.

Approximate dimensions: 21.5cm x 12.5cm, spindle height 6cm.

Price: 21.44 (25.73 Including VAT at 20%)



Replacement Water Pump 300TDi
Replacement Vscous Unit 300TDi Ref: ERR2266=
Replacement viscous unit for 300TDi engines.

Application: Discovery 1994 to 1999, Defender 1994 to 2002ish, Range Rover Classic 1994 to 1995.

Approximate dimensions: overall diameter 165mm, height 70mm. Left hand thread mounting nut 32mm across flats.

Price: 62.00 (74.40 Including VAT at 20%)



Replacement Vscous Unit 300TDi
Replacement Viscous Unit - V8 Serpentine Engine Ref: ERR3443=
Replacement viscous drive unit for cooling fan.

Application: Discovery V8 from 1994 to 1999, Range Rover Classic 1994 to 1995, Defender V8i (not NAS models). This is for engines using a multi-groove serpentine auxilliary drive belt.

Approximate dimensions: overall diameter 17cm, height 7cm, mounting has left hand thread and is 36mm across flats.

Price: 75.00 (90.00 Including VAT at 20%)



Replacement Viscous Unit - V8 Serpentine Engine
Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Cooling System

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -