Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Clutch Parts
Clutch Release Bearing Ref: FTC5200=
Application: Series 3, Defender, Discovery 1 and Range Rover Classic.
Description: Latest design self centering release bearing by NSK. Standard equipment on Defender and Discovery 1, can be used on Series 3 and Range Rover Classic.

Price: 15.00 (18.00 Including VAT at 20%)



Clutch Release Bearing
Clutch Release Arm Ref: 576137
Application: Series 3, Defender V8 and TD5, Range Rover Classic V8, Discovery 1 V8 and Discovery 2 TD5.

Description: Cast steel clutch release arm.

Approximate dimensions: Overall length 21.2cm(8.3").

Price: 28.68 (34.42 Including VAT at 20%)



Clutch Release Arm
Clutch Arm Service Kit Ref: 576137FIX
Application: Series 3, Defender V8 and TD5, Range Rover Classic V8, Discovery 1 V8 and Discovery 2 TD5.

Description: Set of clips, inserts etc for the cast steel clutch release arm.

Price: 4.50 (5.40 Including VAT at 20%)



Clutch Arm Service Kit
Clutch Slave Cylinder - R380 Gearbox Ref: FTC5072
Application: The following vehicles when fitted with R380 gearbox. Discovery 1 V8, 300TDi and MPi, Classic Range Rover V8 and 300TDi, Defender 300TDi.
Description: Lockheed Delphi LL15965 clutch slave cylinder.
Approximate dimensions: overall length 110mm (4.33"), bore 22.5mm (0.89"), mounting hole centres 63mm (2.48").

Price: 27.52 (33.02 Including VAT at 20%)



Clutch Slave Cylinder - R380 Gearbox
Seal Kit for Clutch Master Cylinder Ref: STC1126
Application: Discovery 1 1989 to 1998, Range Rover Classic 1972 to 1995. Suitable for clucth master cylinders AEU1714 and ANR2186.
Description: Genuine seal kit with instructions. Old parrt number BAU1252.

Price: 6.72 (8.06 Including VAT at 20%)



Seal Kit for Clutch Master Cylinder
Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Clutch Parts

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -