Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Braking System
Page:  1  2  3   >   >>
Pair of Front Brake Discs by Lockheed Ref: FRC7329DPAIR
Pair of Lockheed - Delphi boxed solid brake discs.
Application: Defender front 1983 to 2000, Range Rover Classic 1986 to 1989, Discovery 1 1989 to 1999.
Approximate dimensions: overall diameter 30cm, inside diameter 10cm, overall width 7.9cm, thickness of disc 14mm

Price: 39.50 (47.40 Including VAT at 20%)



Pair of Front Brake Discs by Lockheed
Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT01
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of early and late type hub seals, 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Range Rover Classic 1972 to June 1985, either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a pair of Discs
Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT02
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of inner and outer hub seals, 2x hub nut lockers and 2x flange gaskets. Inner oil seals are original equipment by Gaco/Angus, outer are replacement.
Application: Range Rover Classic 1985 to 1989 and non-ABS to JA624516. Discovery up to chassis # JA032850. Either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a pair of Discs
Fitting Kit for a Pair of Discs Ref: BRAKEDISCFITKIT03
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 hub oil seals, choice of 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Range Rover Classic 1990 to 1995 except non-ABS to JA624516. Discovery 1 from chassis # JA032851 onwards. Defender from chassis number LA930435. Either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a Pair of Discs
Genuine Front Brake Pads Ref: sfp500220
Application: Discovery 1 to chassis number KA034313, Classic Range Rover from 1986 to 1989. Vehicles with solid front discs.

Description: Axle set of pads (4 pads) with fitting kit. One pad fitted with wear sensor. Retained by split pins.

Approximate dimensions: each pad is 105mm (4.13") wide and 73mm (2.87") high including the tab.

Old part number: STC9187

Price: 44.26 (53.11 Including VAT at 20%)



Genuine Front Brake Pads
Mintex Front Brake Pad Set Ref: STC9187D
Application: Discovery 1 to chassis number KA034313, Classic Range Rover from 1986 to 1989. Vehicles with solid front discs.

Description: Axle set of pads (4 pads). One pad fitted with wear sensor. Retained by split pins.
Not supplied with fitting kit, use STC8573.

Approximate dimensions: each pad is 105mm (4.13") wide and 73mm (2.87") high including the tab.

Price: 18.24 (21.89 Including VAT at 20%)



Mintex Front Brake Pad Set
Genuine Front Brake Pads - Vented Discs Ref: SFP500180
Application: Vented front disc brakes on Range Rover Classic 1990 to 1995 and Discovery 1 (NB not many Discovery 1s were fitted with vented front discs).

Description: Set of 4 brake pads (one with wear sensor), plus fitting kit of 4x solid pins, 4x springs and 4x 'R' clips.

Approximate dimensions: each pad is 105mm (4.13") wide and 72mm (2.83") high.

Old part number: STC9190


Price: 32.69 (39.23 Including VAT at 20%)



Genuine Front Brake Pads - Vented Discs
Mintex Front Brake Pads - Vented Discs Ref: STC9190D
Application: Vented front disc brakes on Range Rover Classic 1990 to 1995 and Discovery 1 (NB not many Discovery 1s were fitted with front vented discs).

Description: Mintex set of 4 brake pads (one with wear sensor) part number MLB116. Not supplied with fitting kit, use STC8575 if required.

Approximate dimensions: each pad is 105mm (4.13") wide and 72mm (2.83") high.

Price: 18.50 (22.20 Including VAT at 20%)



Mintex Front Brake Pads - Vented Discs
Front Brake Pads for Defender, Classic and Discovery 1 Ref: ZZDA4153

More Bite! Less Dust!

Application: Defender 90 to approx 1986 front axle, Range Rover Classic from 1986 to approx 1989 - solid front discs, Discovery 1 from 1989 to 1993 with solid front discs.
Description: EBC Greenstuff 6000 Series front brake pads - axle set.
Equivalent to STC9186 and STC9187

Price: 30.74 (36.89 Including VAT at 20%)



Front Brake Pads for Defender, Classic and Discovery 1
Rear Brake Pad Set for Classic and Discovery 1 Ref: ZZDA4154

More Bite, Less Dust!

Application: Range Rover Classic 1985 to 1995, rear axle. Discovery 1 1995 to 1998 rear axle.
Description: EBC Greenstuff 6000 Series rear brake pads - axle set.
Equivalent to SFP500190, STC9188.

Price: 34.10 (40.92 Including VAT at 20%)





Related products:
1. Brake Pad Fitting Kit (Ref: STC8574)
Rear Brake Pad Set for Classic and Discovery 1
Digital Dispensary > RANGE ROVER Classic Parts > Range Rover Classic Braking System
Page:  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -