Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > POLYBUSH suspension bushes > Polybush part sets and additional bushes
Page:  1  2  3  4   >   >>
Steering damper for Series, Classic and Discovery - additional bush set. Ref: ZZPOLYBUSHSET15
Additional set of bushes for steering damper. Equivalent to 4x 568858.

Application: Series 1-3, Range Rover Classic and Discovery1.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 19.71 (23.65 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Steering damper for Series, Classic and Discovery - additional bush set.
Steering Damper for Defender - additional set. Ref: ZZPOLYBUSHSET16
Set of 3 bushes and 1 tube. Equivalent to 2x 568858 and 1x NRC1775.

Application: Defender 1983 onwards. One set per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 16.60 (19.92 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Steering Damper for Defender - additional set.
Front anti-roll bar - additional set. Ref: ZZPOLYBUSHSET17
Set of 6 bushes. Equivalent to 2x NTC6828 and 4x 552819.

Application: Front anti-roll bar bush set for Defender 90, 110 & 130, Discovery 1 and Range Rover Classic. NB only where fitted with genuine anti-roll bar, please check before ordering. One set per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 33.74 (40.49 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   




People who bought this item also bought:
1. Rotor Arm Lucas V8 (Ref: STC1857)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
Front anti-roll bar - additional set.
Rear anti-roll bar - additional set. Ref: ZZPOLYBUSHSET18
Set of 6 bushes. Equivalent to 2x NTC7394 and 4x 552819.

Application: Rear anti-roll bar bush set for Defender 90, Discovery 1 and Range Rover Classic. NB only where fitted with genuine anti-roll bar, please check before ordering. One set per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 30.72 (36.86 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Rear anti-roll bar - additional set.
Rear anti-roll bar - additional set. Ref: ZZPOLYBUSHSET51
Set of 6 bushes. Equivalent to 2x NRC5674 and 4x 552819.

Application: Rear anti-roll bar bush set for Defender 110 & 130. NB only where fitted with genuine anti-roll bar, please check before ordering. One set per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 31.29 (37.55 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   




People who bought this item also bought:
1. Rotor Arm Lucas V8 (Ref: STC1857)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
Rear anti-roll bar - additional set.
Front Radius Arm to Axle - part set Ref: ZZPOLYBUSHKIT1A
Kit of 8 half bushes and 4 centre tubes for the front radius arms to axle bushes. Equivalent to 4x NTC7307. One kit per vehicle.

Application: Range Rover Classic to 1985, Defender 90, 110 and 130 to 1993.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 45.53 (54.64 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Front Radius Arm to Axle - part set
Front Radius Arm to Axle - part set Ref: ZZPOLYBUSHKIT1B
Kit of 8 half bushes and 4 centre tubes for the front radius arms to axle bushes. Equivalent to 4x NTC6781/NTC6860. One kit per vehicle.

Application: Range Rover Classic to 1986 to 1995, Defender 90, 110 and 130 to 1994 onwards, Discovery 1989 to 1999.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 45.53 (54.64 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Front Radius Arm to Axle - part set
Rear radius arm to axle - part set Ref: ZZPOLYBUSHKIT1C
Set of 4 half bushes and two centre tubes. Equivalent to 2x NTC1772.

Application: Range Rover Classic 1972 to 1995, Defender 1983 onwards, Discovery 1 1989 to 1999. One kit per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 22.26 (26.71 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   




People who bought this item also bought:
1. Rear 'A' Frame to Chassis Bushes (Ref: ZZPOLYBUSHKIT1Q)
2. Rear radius arms to chassis - part set (Ref: ZZPOLYBUSHKIT1G)
Rear radius arm to axle - part set
Panhard rod bushes - part set Ref: ZZPOLYBUSHKIT1D
Kit of 4 half bushes and 2 centre tubes. Equivalent to 2x ANR3410 bush.

Application: Range Rover Classic 1986 to 1995, Defender 1983 onwards, Discovery 1989 to 1999. One kit per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.

Price: 18.20 (21.84 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Panhard rod bushes - part set
Panhard rod bushes - part set Ref: ZZPOLYBUSHKIT1E
Kit of 4 half bushes and 2 centre tubes. Equivalent to 2x 575580 bush.

Application: Range Rover Classic 1972 to 1985. One kit per vehicle.

Available in Classic - red, Dynamic - orange and Comfort - blue formulas.
.

Price: 18.20 (21.84 Including VAT at 20%)

  • Classic - Red   
  • Comfort - Blue   
  • Dynamic - Orange   



Panhard rod bushes - part set
Digital Dispensary > POLYBUSH suspension bushes > Polybush part sets and additional bushes
Page:  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Door Mirror Right Hand

Door Mirror Right Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -