Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > POLYBUSH suspension bushes > Polybush for Discovery 3&4 and Range Rover Sport
Page:  1  2   >   >>
Front Lower Wishbone, Front Bush Ref: ZZPOLYBUSHKIT1BG
Application: Range Rover Sport, Discovery 3 and Discovery 4.
Description: Equivalent to RBX500432 on Sport and RBX500311 on Discovery 3 & 4. Kit contains 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 32.72 (39.26 Including VAT at 20%)



Front Lower Wishbone, Front Bush
Front Lower Wishbone, Rear Bush - Discovery only Ref: ZZPOLYBUSHKIT1BH
Application: Discovery 3 & 4.
Description: Equivalent to RBX500291, kit of 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 42.34 (50.81 Including VAT at 20%)



Front Lower Wishbone, Rear Bush - Discovery only
Front Lower Wishbone, Rear Bush - Sport only Ref: ZZPOLYBUSHKIT1BU
Application: Range Rover Sport.
Description: Equivalent to RBX500531, kit of 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 42.34 (50.81 Including VAT at 20%)



Front Lower Wishbone, Rear Bush - Sport only
Front Upper Wishbone Bushes Ref: ZZPOLYBUSHKIT1BJ
Application: Range Rover Sport, Discovery 3 and Discovery 4.
Description: Equivalent to RBX500443 on Sport and RBX500301 on Discovery 3 & 4. Kit contains 4 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 51.67 (62.00 Including VAT at 20%)



Front Upper Wishbone Bushes
Rear Lower Wishbone, Front Bush Ref: ZZPOLYBUSHKIT1BL
Application: Range Rover Sport, Discovery 3 and Discovery 4.
Description: Equivalent to RBX500211 on Sport and RBX500101 on Discovery 3 & 4. Kit contains 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 58.59 (70.31 Including VAT at 20%)



Rear Lower Wishbone, Front Bush
Rear Lower Wishbone, Rear Bush Ref: ZZPOLYBUSHKIT1BM
Application: Range Rover Sport, Discovery 3 and Discovery 4.
Description: Equivalent to RGX500111 on Sport and on Discovery 3 & 4. Kit contains 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 31.49 (37.79 Including VAT at 20%)



Rear Lower Wishbone, Rear Bush
Rear Upper Wishbone, Front Bush Ref: ZZPOLYBUSHKIT1BN
Application: Range Rover Sport, Discovery 3 and Discovery 4.
Description: Equivalent to RGX500201 on Sport and RGX500131 on Discovery 3 & 4. Kit contains 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 58.52 (70.22 Including VAT at 20%)



Rear Upper Wishbone, Front Bush
Rear Upper Wishbone, Rear Bush Ref: ZZPOLYBUSHKIT1BP
Application: Range Rover Sport, Discovery 3 and Discovery 4.
Description: Equivalent to RHF500130 on Sport and RGX500121 on Discovery 3 & 4. Kit contains 2 bushes.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 44.43 (53.32 Including VAT at 20%)



Rear Upper Wishbone, Rear Bush
Front Anti-Roll Bar Bushes Ref: ZZPOLYBUSHKIT1BK
Application: Discovery 3 and Discovery 4.
Description: Pair of bushes for front anti-roll bar to chassis. Equivalent to 2x RBX000571
Approximate dimensions: Length 66mm(2.6"), internal diameter 27.5mm(1.1")

Price: 14.35 (17.22 Including VAT at 20%)



Front Anti-Roll Bar Bushes
Full Set of Wishbone Bushes for Discovery3 & 4 Ref: ZZPOLYBUSHSET105
Application: Discovery 3 & 4.
Description: Full set of wishbone bushes for front and rear suspension. Includes the above part kits 1BG, 1BH, 1BJ, 1BL, 1BM, 1BN & 1BP.

N O T E: Vehicle suspension geometry must be checked/reset once bushes have been fitted.

Available in Dynamic orange formulation only. Polybush Dynamic is our intermediate hardness grade. It behaves more like the original bushes for Sport and Discovery 3 & 4.

Price: 295.00 (354.00 Including VAT at 20%)



Full Set of Wishbone Bushes for Discovery3 & 4
Digital Dispensary > POLYBUSH suspension bushes > Polybush for Discovery 3&4 and Range Rover Sport
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -