Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Spark Plug Champion N12YC Ref: RTC3570
Application: Series 2A and Series 3 4 cylinder engines with 8:1 compression ratio.
Description: Champion N12YC spark plug, original equipment.

Price: 1.27 (1.52 Including VAT at 20%)



Spark Plug Champion N12YC
Spark Plug Champion N5C Ref: RTC3571
Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.

Price: 1.67 (2.00 Including VAT at 20%)



Spark Plug Champion N5C
Spark Plug Champion RN9YC Ref: ERR743
Application: Defender 90/110 with 2.5 litre petrol engine.

Description: Champion RN9YC spark plug, original equipment.

Price: 1.90 (2.28 Including VAT at 20%)



Spark Plug Champion RN9YC
Spark Plug NGK BPR6ES Ref: ERR743NGK
Application: Defender 90/110 with 2.5 litre petrol engine.

Description: NGK BPR6ES spark plug, alternative to Champion. Preferred by some.

Price: 2.10 (2.52 Including VAT at 20%)




People who bought this item also bought:
1. Timing Belt 1.8 Petrol Frelander (Ref: LHN100560L=)
Spark Plug NGK BPR6ES
Spark Plug Freelander Ref: NLP100290L
Application: Freelander 1 with 1.8 petrol from VIN 1A (approx 2001) onwards and 2.5 V6 up to VIN 4A(2004 approx).
Description: Champion Platinum branded spark plug, type RC8PYPB4.
Approximate dimensions: Overall length 75mm(2.95"), thread diameter 14mm(0.55"), thread length 10mm(0.4"), electrode projection 5.8mm(0.23")

Price: 3.99 (4.79 Including VAT at 20%)



Spark Plug Freelander
Acorn for HT Leads Ref: 214278
Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")

Price: 1.24 (1.49 Including VAT at 20%)




People who bought this item also bought:
1. Split Brass Washer (Ref: 214279)
2. Rebuild kit for Solex 32PBI-2 Carburettor (Ref: 266693)
3. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)


Related products:
1. Split Brass Washer (Ref: 214279)
Acorn for HT Leads
Split Brass Washer Ref: 214279
Application: Series One and Series Two. 1948 to 1961 approx.
Description: Split brass washer for retaining high tensions leads to distributor caps and plug caps. Use with 217278 acorn nut and copper cored high tension cable.
Approximate dimensions: overall diameter 10mm(0.375")

Price: 0.45 (0.54 Including VAT at 20%)




People who bought this item also bought:
1. Acorn for HT Leads (Ref: 214278)
2. Rebuild kit for Solex 32PBI-2 Carburettor (Ref: 266693)
3. Black High Tension Lead, Copper Cored (Ref: 80603)
Split Brass Washer
Black High Tension Lead, Copper Cored Ref: 80603
Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre

Price: 1.46 (1.75 Including VAT at 20%)




People who bought this item also bought:
1. Acorn for HT Leads (Ref: 214278)
2. Oil Seal Set for Gearbox (Ref: 600603KIT)
3. Split Brass Washer (Ref: 214279)
Black High Tension Lead, Copper Cored
Spark Plug Cover Ref: ZZSB05F
Application: Series 1, Series 2 and Series3.
Description: NGK spark plug cover incorporating a resistor. For use with copper cored high tension cable. An economic replacement where originality is not an issue. Supplied with seals to make connection waterproof.

Price: 4.03 (4.84 Including VAT at 20%)




People who bought this item also bought:
1. Head Gasket Set 1600cc (Ref: ZZCB310)
2. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
3. Engine Mount Pair Series One 80" (Ref: S1ENGMNTS)
Spark Plug Cover
Lead Set 4cyl Series 3 Ref: ERC3256D
Application: Series 3 four cylinder petrol engines.
Description: Replacement high tension lead set including king lead.

Price: 6.50 (7.80 Including VAT at 20%)



Lead Set 4cyl Series 3
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -