Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > FREELANDER 1 Parts > Lamps for Freelander 1
Page:  1  2   >   >>
Rear Lamp Left Hand Ref: AMR3989
Application: Freelander One 1996 to 2001
Description: Left hand rear lower lamp (in bumper), stop/tail and indicator functions. Comes complete with bulb holders and bulbs.
Approximate dimensions: overall length 290mm(11.14"), height of lens 70mm(2.8")

Price: 38.41 (46.09 Including VAT at 20%)



Rear Lamp Left Hand
Rear Lamp Right Hand Ref: AMR3990
Application: Freelander One 1996 to 2001
Description: Right hand rear lower lamp (in bumper), stop/tail and indicator functions. Comes complete with bulb holders and bulbs.
Approximate dimensions: overall length 290mm(11.14"), height of lens 70mm(2.8")

Price: 38.41 (46.09 Including VAT at 20%)



Rear Lamp Right Hand
Rear Lamp Left Hand Ref: AMR4002
Application: Freelander One 1996 to 2003
Description: Left hand rear upper lamp with rear fog and reverse lamp functions. Comes complete with bulb holders and bulbs
Approximate dimensions: height of lens 230mm(9.1"), width of lens 155mm(6.1")

Price: 51.51 (61.81 Including VAT at 20%)



Rear Lamp Left Hand
Rear Lamp Right Hand Ref: AMR4003
Application: Freelander One 1996 to 2003
Description: Right hand rear upper lamp with rear fog and reverse lamp functions. Comes complete with bulb holders and bulbs
Approximate dimensions: height of lens 230mm(9.1"), width of lens 155mm(6.1")

Price: 51.51 (61.81 Including VAT at 20%)



Rear Lamp Right Hand
Rear Lamp Right Hand Ref: XFB000280
Application: Freelander One chassis number 2A to 3A
Description: Right hand rear lower lamp (in bumper) stop/tail and indicator functions. Comes complete with bulb holders and bulbs.
Approximate dimensions: overall length 290mm(11.4"), height of lens 70mm(2.76")

Price: 44.15 (52.98 Including VAT at 20%)



Rear Lamp Right Hand
Rear Lamp Left Hand Ref: XFB000290
Application: Freelander One chassis number 2A to 3A
Description: Left hand rear lower lamp (in bumper) stop/tail and indicator functions. Comes complete with bulb holders and bulbs.
Approximate dimensions: overall length 290mm(11.4"), height of lens 70mm(2.76")

Price: 44.15 (52.98 Including VAT at 20%)



Rear Lamp Left Hand
RH Rear Lamp Ref: XFB500180
Application: Freelander One 2004 to 2006.
Description: Right hand rear lower lamp from chassis number 4A onwards. Supplied with bulb holders and bulbs.
Approximate dimensions: lens 14.5cm(5.7") wide by 11.2cm(4.4") high.

Price: 46.50 (55.80 Including VAT at 20%)



RH Rear Lamp
LH Rear Lamp Ref: XFB500190
Application: Freelander One 2004 to 2006.
Description: Left hand rear lower lamp from chassis number 4A onwards. Supplied with bulb holders and bulbs.
Approximate dimensions: lens 14.5cm(5.7") wide by 11.2cm(4.4") high.

Sorry, currently unavailable.

Price: 46.50 (55.80 Including VAT at 20%)


LH Rear Lamp
Side Repeater Lamp Ref: XGB000030
Application: Freelander One 1996 to 2006, Defender and Discovery Two.
Description: Side indicator repeater lamp. Comes with bulb and bulb holder.
Approximate dimensions: length 86mm(3.4"), width 38.5mm(1.5")

Price: 17.01 (20.41 Including VAT at 20%)



Side Repeater Lamp
Bulb Holder Single Pole Ref: XBP100180
Application: Defender 1995 onwards, Discovery One, Discovery Two, Range Rover Two(38A) Freelander One.
Description: Bulb holder for single filament one pole bulbs. 2pin connector. Takes ZZLRA102 connector kit.
Approximate dimensions: overall length 45mm(1.8"), overall diameter 40mm(1.6")

Price: 1.85 (2.22 Including VAT at 20%)





Related products:
1. Connector Kit for Bulb Holders (Ref: ZZLRA102)
Bulb Holder Single Pole
Digital Dispensary > FREELANDER 1 Parts > Lamps for Freelander 1
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Door Mirror Right Hand

Door Mirror Right Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -