Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  6  7
Brake Light Switch Ref: 13H3735L
Application: Series 2A post hydraulic switch, Series 3 non servo, Range Rover Classic, Discovery 1.

Description: Lucas boxed plastic bodies brake light switch. Default position of switch is ON, plunger is pushed in to turn OFF.

Approximate dimensions: Overall length 54.5mm(2.1"), fits 1/2" diameter mounting hole.

Price: 2.95 (3.54 Including VAT at 20%)



Brake Light Switch
Brake Light Switch Series 3 Ref: 575166
Application: Series 3 with servo brakes.

Description: Genuine boxed brass brake light switch used on models with servo brakes. Mounted on top of brake pedal box, under the bonnet. Supplied with lock nut.

Approximate dimensions: 3/8"unf mounting thread, overall length 46mm

Price: 35.78 (42.94 Including VAT at 20%)



Brake Light Switch Series 3
Adjuster Unit for Handbrake Ref: 37H6134L
Application: Landrover Series 2A and Series 3.

Description: Replacement hand brake adjuster unit. With 1/4"UNF mounting studs.

Approximate dimensions: 48mm(1.9") wide, 50mm(1") high.

Old part number: 515925


Price: 8.00 (9.60 Including VAT at 20%)



Adjuster Unit for Handbrake
Repair Kit for Handbrake Adjuster Ref: 515924
Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


Price: 3.71 (4.45 Including VAT at 20%)




People who bought this item also bought:
1. Clevis for Hand Brake Linkage (Ref: 215809)
Repair Kit for Handbrake Adjuster
Locker for Handbrake Adjuster Ref: 542515
Application: Series 2A and Series 3.

Description: Locking plate for handbrake adjuster.

Approximate dimensions: Overall length 57mm(1.25")

Price: 0.65 (0.78 Including VAT at 20%)



Locker for Handbrake Adjuster
Expander Unit for Hand Brake Ref: 515366D
Application: Series 2A and Series 3.

Description: Replacement hand brake actuator.

Approximate dimensions: overall length 150mm(5.9"), width 70mm(2.8"), height 34.5mm(1.4")

Price: 12.00 (14.40 Including VAT at 20%)




People who bought this item also bought:
1. Hydraulic Brake Light Switch (Ref: ZZ21B291)
2. Hydraulic Brake Light Switch (Ref: STC1689)
3. Dust Cap for Bleed Screw (Ref: 594091)
Expander Unit for Hand Brake
Fixing Kit for Expander Unit Ref: 515366FIX
Application: Series 2A and Series 3.

Description: Fixing kit for handbrake actuator. Contains 215809 clevis, 515466, 515467 and 515470 clips, 515466 boot and 2828 nut.

Price: 6.50 (7.80 Including VAT at 20%)




People who bought this item also bought:
1. Hydraulic Brake Light Switch (Ref: ZZ21B291)
2. Hydraulic Brake Light Switch (Ref: STC1689)
3. Dust Cap for Bleed Screw (Ref: 594091)
Fixing Kit for Expander Unit
Boot for Handbrake Expander Unit Ref: 515466D
Application: Series 2A and Series 3.

Description: Replacement boot for the handbrake actuator.

Price: 1.25 (1.50 Including VAT at 20%)




People who bought this item also bought:
1. 27mm Wheel Nut Socket (Ref: ZZLAS2016)
2. Replacement Water Pump S2a & S3 (Ref: STC3758D)
3. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Boot for Handbrake Expander Unit
Clip for Handbrake Expander Unit Ref: 515927
Application: Series 2A and Series 3 4cylinder and 6 cylinder models.

Description: Spring clip for retaining pistons in handbrake actuator.

Approximate dimensions: Overall length 41.5mm(1.6").

Price: 1.20 (1.44 Including VAT at 20%)



Clip for Handbrake Expander Unit
Clevis for Hand Brake Linkage Ref: 215809
Application: Series 1, 2 & 3.
Description: Reproduction clevis with pin for hand brake linkage. Threaded for 5/16"UNF rod.
Approximate dimensions: overall length 46mm (1.8")

Price: 3.05 (3.66 Including VAT at 20%)




People who bought this item also bought:
1. Repair Kit for Handbrake Adjuster (Ref: 515924)
2. Steering Box Repair Kit (Ref: STRGBOXKIT01)
3. Universal Joint for Front Half-Shafts (Ref: RTC3690)
Clevis for Hand Brake Linkage
Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  6  7

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -