Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>
Lockheed Delphi Wheel Cylinder S2A & S3 Ref: 243743D
Application: 109 4cylinder front left hand wheel cylinder. 2 per wheel. Also 88" front left hand wheel cylinder from 1980 onwards.
Description: Lockheed Delphi LW30360 single piston wheel cylinder with cast iron body.
Approximate dimensions: length 57mm (2.24"), bore 28.5mm (1.125").

Price: 12.00 (14.40 Including VAT at 20%)



Lockheed Delphi Wheel Cylinder S2A & S3
Lucas Wheel Cylinder Series 2A &3 Ref: 243744
Application: 109 4cylinder front right hand wheel cylinder. 2 per wheel. Also 88" front right hand wheel cylinder from 1980 onwards.
Description: Lucas single piston wheel cylinder with cast iron body.
Approximate dimensions: length 57mm (2.24"), bore 28.5mm (1.125").

Price: 18.00 (21.60 Including VAT at 20%)



Lucas Wheel Cylinder Series 2A &3
Lockheed Delphi Wheel Cylinder S2A & S3 Ref: 243744D
Application: 109 4cylinder front right hand wheel cylinder. 2 per wheel. Also 88" front right hand wheel cylinder from 1980 onwards.
Description: Lockheed Delphi LW30361 single piston wheel cylinder with cast iron body.
Approximate dimensions: length 57mm (2.24"), bore 28.5mm (1.125").

Price: 12.00 (14.40 Including VAT at 20%)



Lockheed Delphi Wheel Cylinder S2A & S3
Replacement Seal Kit for Wheel Cylinders Ref: 266684D
Application: 109 4cylinder front wheel cylinders. Also 88" front wheel cylinders from 1980 onwards.

Description: Replacement set of seals to repair all 4 front wheel cylinders. To suit 1.125" bore cylinders.

Price: 2.50 (3.00 Including VAT at 20%)





Related products:
1. Cylinder Hones - Brakes (Ref: ZZLAS2243)
Replacement Seal Kit for Wheel Cylinders
Replacement Wheel Cylinder S2A & S3 Ref: 600200D
Application: 109 6cylinder & V8 front left hand wheel cylinder. 2 per wheel.
Description: Replacement single piston wheel cylinder with cast iron body. Can be distinquished from 4 cylinder type by the protruding piston.

Price: 9.95 (11.94 Including VAT at 20%)



Replacement Wheel Cylinder S2A & S3
Replacement Wheel Cylinder S2A & S3 Ref: 600201D
Application: 109 6cylinder & V8 front right hand wheel cylinder. 2 per wheel.
Description: Replacement single piston wheel cylinder with cast iron body. Can be distinquished from 4 cylinder type by the protruding piston.

Price: 9.95 (11.94 Including VAT at 20%)



Replacement Wheel Cylinder S2A & S3
Bleed Screw for Wheel Cylinders Ref: 556508
Application: Series 1, 2, & 3.
Description: Bleed screw with conical seat. Suits all Series wheel cylinders (and clutch slave cylinders) except original Series 1 cylinders which had a spherical seat.
Original part number 248909

Price: 0.50 (0.60 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 11" Front (Ref: STC3944DKIT)
2. Replacement Brake Master Cylinder S2A & S3 (Ref: 90577520D)
3. Dust Cap for Bleed Screw (Ref: 594091)
Bleed Screw for Wheel Cylinders
Dust Cap for Bleed Screw Ref: 594091
Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Anchor Plate for 10inch brake shoes (Ref: 236993)
2. Axle Set of Brake Shoes - 11" Front (Ref: STC3944DKIT)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Dust Cap for Bleed Screw
Piston for Front Brake Caliper Ref: 606683D
Application: Defender 90 to 'HA' VIN number, Discovery 1 and Range Rover Classic.

Description: Chrome plated steel piston for front brake caliper.

Approximate dimensions: Outside diameter 1.625"(41.3mm), overall length 1.35"(34.3mm)

Price: 3.50 (4.20 Including VAT at 20%)



Piston for Front Brake Caliper
Stainless Steel Piston for Brake Caliper Ref: 606683S
Application: Defender 90 to 'HA' VIN number, Discovery 1 and Range Rover Classic.

Description: Stainless steel piston for front brake caliper.

Approximate dimensions: Outside diameter 1.625"(41.3mm), overall length 1.35"(34.3mm)

Price: 8.00 (9.60 Including VAT at 20%)



Stainless Steel Piston for Brake Caliper
Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -