Dingocroft Gearbox and Transfer Box Tools

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Special Tools for Land Rover > Churchill Tools > Gearbox and Transfer Box Tools

Adaptor for the Removal of Layshaft Bearing Ref: LRT-37-001
Application: The following gearboxes (transmissions); LT95, LT77 and R380.
Description: Adaptor for the removal of the layshaft bearings of the above gearboxes. Used in conjunction with LRT-99-002 hand press.
Old part number: 18G.47BA
Price: £108.75 (£130.50 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Conversion Ring - Primary Shaft Bearing Removal Ref: LRT-37-002
Application: LT77 and R380 gearboxes (tramsmissions).
Description: Conversion ring to allow the removal of the primary shaft bearing with the hand press LRT-99-002.
Old part number: 18G.47BAX
Approximate dimensions: Overall diameter 60mm (2.36"), inside diameter 38.5mm (1.5"), thickness 12mm (0.47")

Price: £19.15 (£22.98 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Adaptor/Remover Input Shaft Bearing Ref: LRT-37-004
Application: LT77 and R380 gearboxes(transmissions)
Description: Adaptor/remover for the input shaftpilot bearing track. Used in conjunction with the impulse extractor (slide hammer), tool number LRT-99-004 - see below near bottom of this page.
Old part number 18G.284AAH
Price: £167.96 (£201.55 Including VAT at 20%)

Related products:

1. Impuse Extractor (Slide Hammer) - Main Tool (Ref: LRT-99-004)

Remover, Bearing Race Centre - Main Tool Ref: LRT-37-009
Description: Main tool for the removal of bearing race centre in gearbox.
Application: LT77 & R380 gearboxes.
Old part number: 18G.705
Used in conjunction with LRT-37-010 and LRT-37-011
Price: £105.18 (£126.22 Including VAT at 20%)

Adaptor for Removal of Oil Seal Collar Ref: LRT-37-010
Description: Adaptor tool for the removal of the oil seal collar on the rear of the mainshaft in gearbox.
Application: LT77 & R380 gearboxes.
Old part number: 18G.705-1A
Used in conjunction with LRT-37-009
Price: £88.74 (£106.49 Including VAT at 20%)

Related products:

1. Remover, Bearing Race Centre - Main Tool (Ref: LRT-37-009)

Adaptor for Removal of Layshaft Bearings Ref: LRT-37-011
Application: LT77 gearbox to suffix E inclusive. Fitted to Defender, Discovery 1 and Classic Range Rover.
Description: Adator for the removal of layshaft bearings. Used with LRT-37-009.
Old tool number: 18G.705-5
Price: £66.39 (£79.67 Including VAT at 20%)

Related products:

1. Remover, Bearing Race Centre - Main Tool (Ref: LRT-37-009)

Remover 1st Speed Hub and Gear Cluster Ref: LRT-37-012
Application: LT77 and LT85 gearboxes.
Description: Remover for the first speed hub and gear cluster from the mainshaft of the above gearboxes.
Old part number 18G.1400
Price: £350.44 (£420.53 Including VAT at 20%)

Adaptor for Removal of Mainshaft 5th Gear Ref: LRT-37-013
Application: LT77 gearbox (transmission).
Description: Adaptor for the removal of 5th gear from the mainshaft. Used in conjunction with LRT-37-012.
Old part number: 18G.1400-1.

Price: £51.04 (£61.25 Including VAT at 20%)

Related products:

1. Remover 1st Speed Hub and Gear Cluster (Ref: LRT-37-012)

Replacer Mainshaft Rear Oilseal Ref: LRT-37-014
Application: LT77 and R380 gearboxes. Used in Defender, Discovery 1, Discovery 2 and Range Rover 38A (2nd generation)
Description: Tool for replacing the rear oilseal on to the mainshaft. Allows the easy fitting of the seal to correct depth and squarely to shaft and housing.
Overall length 21cm (8.3")
Old tool number: 18G.1422

Price: £68.10 (£81.72 Including VAT at 20%)

Replacer Mainshaft Fifth Gear and Collar Ref: LRT-37-015
Description: Replacer for fifth gear and collar on gearbox mainshaft.
Application: LT77, LT85 and R380 gearboxes.
Old part number: 18G.1431
Price: £93.89 (£112.67 Including VAT at 20%)

Layshaft Bearing Remover Ref: LRT-37-017
Application: LT77 gearbox (transmission).
Description: Remover for the layshaft bearing. Used in conjunction with LRT-37-009.
Old part number: 18G.705-7.
Price: £73.42 (£88.10 Including VAT at 20%)

Related products:

1. Remover, Bearing Race Centre - Main Tool (Ref: LRT-37-009)

Adaptor for replacing Oil Seal Collar Ref: LRT-37-021
Application: R380 gearbox in Defender 1995>2006, Discovery 1 1995>1998, Discovery 2 1998>2006 and Range Rover 38A 1995>2001.
Description: Adaptor for fitting LRT-37-015 to end of mainshaft of R380 gearbox. Used for replacing mainshaft oilseal collar and 5th gear.
Price: £15.92 (£19.10 Including VAT at 20%)

Related products:

1. Replacer Mainshaft Fifth Gear and Collar (Ref: LRT-37-015)

Remover Layshaft Bearing Ref: LRT-37-022
Application: R380 gearbox in Defender, Discovery1, Discovery2 and Range Rover 2.
Description: Adaptor for use with hand press LRT-99-002 to remove layshaft bearings on R380 gearbox.

Price: £101.37 (£121.64 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Retainer for Layshaft Gear - R380 Ref: LRT-37-023
Description: Tool to retain layshaft gear during gearbox assembly.
Application: R380 gearbox.
Price: £104.12 (£124.94 Including VAT at 20%)

Adaptor/Remover Layshaft Bearing Ref: LRT-37-024
Application: R380 gearbox.
Description: Adaptor for the removal of layshaft bearing track. Use in conjunction with LRT-37-009.
New tool number: 308-528
Price: £72.49 (£86.99 Including VAT at 20%)

Related products:

1. Remover, Bearing Race Centre - Main Tool (Ref: LRT-37-009)

Remover/Replacer Selector Pin Ref: LRT-37-049
Application: Freelander 1 from 2001 with Getrag gearbox (fitted with TD4 engine).
Description: Three part tool for romving and replacing the roll pin the retains the selector quadrant.
Price: £99.67 (£119.60 Including VAT at 20%)

Remover Selector Gear Linkage Ref: LRT-37-050
Application: Freelander 1 from 2001 with Getrag gearbox (fitted with TD4 engine).
Description: Remver for the selector gear linkage.
Old part number: 18G1592
Price: £22.54 (£27.05 Including VAT at 20%)

Gear Dismantling Fork Ref: LRT-37-051
Application: Freelander 1 from 2001 with Getrag gearbox (fitted with TD4 engine).
Description: Simple fork for dismantling gears on the Getrag gearbox.
Old part number: 18G1593
Price: £37.41 (£44.89 Including VAT at 20%)

Wrench mainshaft nut S1 - S3 Ref: LRT-37-509
Application: Gearbox Ser1 to Ser3.
Description: Tool to remove & replace slotted nut on rear of mainshaft in Ser1 to Ser3 gearboxes
Weight: 3.271kg
Old part number: RO600300

Price: £202.40 (£242.88 Including VAT at 20%)

Adaptor Centre Differential Bearing Removal Ref: LRT-41-001
Application: LT230R and LT230T transfer gearboxes.
Description: Adaptor for removing centre differential bearings. Used with LRT-99-002
Old tool number: 18G47BB
Price: £187.03 (£224.44 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Adaptor Centre Differential Bearing Removal Ref: LRT-41-002
Application: LT230R and LT230T transfer gearbox.
Description: Remover for front bearing (23 roller type) from centre differential. Used in conjunction with LRT-99-002.
Old tool number: LST47-1
Price: £119.76 (£143.71 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Bearing Remover Input Gear Cluster Ref: LRT-41-003
Application: LT230R and LT230T transfer gearboxes.
Description: Tool for removing the bearings from the input gear cluster, used in conjunction with LRT-99-002.
Old tool number: 18G47-7
Price: £129.84 (£155.81 Including VAT at 20%)

Related products:

1. Hand Press (Ref: LRT-99-002)

Dummy Shaft Intermediate Gear Cluster Ref: LRT-41-004
Application: LT230T transfer gearbox.
Description: Dummy shaft for assemblibg intermediate gear cluster, bearings and shims prior to fitting to gearbox.
Old tool number: LST004
Price: £18.54 (£22.25 Including VAT at 20%)

Input Gear Turning Mandrel Ref: LRT-41-005
Application: LT230T transfer gearbox.
Description: Mandrel ( or tool) for rotating the input shaft during assembly of transfer box.
Old tool number: LST105
Price: £61.13 (£73.36 Including VAT at 20%)

Adator Replacer Intermediate Gear Bearing Ref: LRT-41-006
Application: LT230T transfer gearbox.
Description: Adaptor used with LRT-99-003 to seat bearings onto intermediate gear cluster.
Old tool number: LST550-4
Price: £20.41 (£24.49 Including VAT at 20%)

Related products:

1. Replacer Bearings and Oilseals - Main Tool (Ref: LRT-99-003)

Adaptor Socker for Centre Diff Stake Nut Ref: LRT-41-007
Application: LT230R and LT230T transfer gearboxes.
Description: Adaptor for centre differential stake nut to allow tightening by standard 1/2" drive socket tools.
Old tool number: 18G1423
Price: £67.67 (£81.20 Including VAT at 20%)

Centre Differential Bearing Replacer Ref: LRT-41-008
Application: LT230R and LT230T transfer gearboxes.
Description: Tool for replacing bearings on centre differential.
Old tool number: 18G1424
Price: £74.78 (£89.74 Including VAT at 20%)

Guide Studs - Alignment Ref: LRT-41-009
Application: LT230T and LRT230R transfer gearboxes.
Description: Set of 3 guide studs for correct alignment of transfer box to main gearbox..
Old tool number: 18G1425
Price: £36.97 (£44.36 Including VAT at 20%)

Oil Seal Replacer for Transfer Gearbox Ref: LRT-41-012
Application: LT230Q, LT230T &LT230SE transfer gearboxes as fitted to Defender, Discovery 1 and Discovery 2.
Description: Tool for replacing front and rear output oil seals.
Approximate dimensions: overall diameter 80mm, length 120mm.
Price: £74.67 (£89.60 Including VAT at 20%)

Setting Tool for Selector Position Ref: LRT-44-011
Application: ZF automatic gearbox as fitted to Range Rover 38A 1995>2001 and Discovery 2 1998>2006
Price: £76.62 (£91.94 Including VAT at 20%)

Digital Dispensary > Special Tools for Land Rover > Churchill Tools > Gearbox and Transfer Box Tools

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO