Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Gearbox Parts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>
Gasket Set for Series Gearboxes Ref: 600603D
Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.

Price: 3.50 (4.20 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Set for Gearbox (Ref: 600603KIT)
2. Gasket for Differential to Axle Casing (Ref: 7316)
3. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
Gasket Set for Series Gearboxes
Oil Seal Set for Gearbox Ref: 600603KIT
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.

Price: 10.48 (12.58 Including VAT at 20%)




People who bought this item also bought:
1. Gasket Set for Series Gearboxes (Ref: 600603D)
2. Gasket for Differential to Axle Casing (Ref: 7316)
3. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
Oil Seal Set for Gearbox
Bearing First Motion Shaft Ref: 55714D
Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Bearing for 1st motion shaft (input shaft) of gearbox. This is a replacement bearing - not SKF as pictured.
Bearing number: RLS12.
Approximate dimensions: outside diameter 3.25" (82.6mm), inside diameter 1.5" (38mm), thickness 0.75" (19mm).

Price: 5.00 (6.00 Including VAT at 20%)



Bearing First Motion Shaft
Bearing First Motion Shaft Ref: 6397
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.

Description: OEM caged roller bearing between first motion shaft and main shaft with 10 rollers.. Made in the EU.

Approximate dimensions: Cage length 23.6mm(0.93"), rollers 6mm diameter, 19.4mm long.

Price: 4.55 (5.46 Including VAT at 20%)




People who bought this item also bought:
1. Bearing Mainshaft Rear (Ref: 1645)
Bearing First Motion Shaft
Bearing Mainshaft Rear Ref: 1645
Application: Series 1, Series 2 and Series 3 with either 4 or 6 cylinder engine.

Description: OEM boxed bearing for rear of mainshaft on both part syncromesh and full syncromesh gearboxes. Bearing number is 6307C3 and is a single row ball bearing.

Approximate dimensions: Outside diameter 80mm(3.15"), inside diameter 35mm(1.38"), thickness 21mm(0.83")

Price: 11.95 (14.34 Including VAT at 20%)




People who bought this item also bought:
1. Bearing First Motion Shaft (Ref: 6397)
Bearing Mainshaft Rear
Roller Bearing - Mainshaft to Rear Cover Plate Ref: 217478
Application: Series 1, Series 2, Series 2A and Series 3.

Description: Needle roller bearing in steel cage for rear of mainshaft where it is supported in cover plate to rear of transfer case.

Approximate dimensions: Outside diameter 28mm(1.1"), inside diameter 19.5mm(0.75"), length 24mm(0.95").


Price: 26.16 (31.39 Including VAT at 20%)




People who bought this item also bought:
1. Bearing Layshaft Rear (Ref: RTC1412D)
2. Oil Seal Set for Gearbox (Ref: 600603KIT)
3. Caged Needle Bearing Assembly (Ref: 599869)
Roller Bearing - Mainshaft to Rear Cover Plate
Bearing Layshaft Front Ref: 576207
Application: Series1 and Series2 to suffix 'A' gearboxes.

Description: Original equipment specification single row ball bearing for front of layshaft.

Approximate dimensions: Outside diameter 2"(50.8mm), inside diameter 3/4"(19mm), thickness 19/32"(15mm)

Previous part numbers: 09962, 9962.

Price: 35.63 (42.76 Including VAT at 20%)



Bearing Layshaft Front
Bearing Layshaft Front - Replacement Ref: 576207D
Application: Series1 and Series2 to suffix 'A' gearboxes.

Description: Replacement single row ball bearing for front of layshaft.

Approximate dimensions: Outside diameter 2"(50.8mm), inside diameter 3/4"(19mm), thickness 19/32"(15mm)

Previous part numbers: 09962, 9962.

Price: 6.50 (7.80 Including VAT at 20%)



Bearing Layshaft Front - Replacement
Bearing Layshaft Front Ref: 528701
Application: Series 2A suffix B gearbox onwards, Series 3.

Description: Singlre row ball bearing (6305C3) to Original Equipment specification. Supports front end of layshaft.

Approximate dimensions: Outside diameter 80mm(3.15"), inside diameter 25mm(12), thickness 17mm(0.7").

Price: 7.05 (8.46 Including VAT at 20%)



Bearing Layshaft Front
Bearing Layshaft Rear Ref: RTC1412D
Application: Series1, Series2, Series2A and Series3 with LT76 gearbox.

Description: Replacement single row roller bearing for rear of layshaft. Bearing number CFL-7.

Approximate dimensions: Outside diameter 2"(50.8mm), inside diameter 7/8"(22mm), thickness 9/16"(14.3mm).

Previous part number: 55715


Price: 6.05 (7.26 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Set for Gearbox (Ref: 600603KIT)
2. Caged Needle Bearing Assembly (Ref: 599869)
3. Sleeve Laysaft (Ref: 263878)
Bearing Layshaft Rear
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Gearbox Parts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -