Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Oil Pressure Guage Ref: ZZ070.006
Application: Universal.
Description: 52mm diameter oil pressure guage reading to 100psi. Chrome rim and black face. Use with sender unit ZZ070-185 and adaptor ZZ070.033 for Defender 2.5 petrol, 2.5 diesel, 2.5 turbo diesel, 200TDi and 300Tdi.

Price: 52.68 (63.22 Including VAT at 20%)





Related products:
1. Sender Unit - Oil Pressure (Ref: ZZ070.185)
2. Adaptor for Oil Pressure Sender (Ref: ZZ070.033)
Oil Pressure Guage
Sender Unit - Oil Pressure Ref: ZZ070.185
Application: For use with ZZ070.006 oil pressure guage.
Description: Oil pressure sender unit with 1/8" x27 NPTF male thread connector.

Price: 54.38 (65.26 Including VAT at 20%)



Sender Unit - Oil Pressure
Warning Lamp - Charge Ref: 555837
Application: Series 2a suffix D onwards and Series 3.

Description: Warning lamp module for charge with red lens. Fits in bottom segment of minor guages assembly.

Approximate dimensions: Overall length 70mm(2.75"), height 40mm(1.6"), depth 23mm(0.9").

Price: 3.50 (4.20 Including VAT at 20%)



Warning Lamp - Charge
Adaptor for Oil Pressure Sender Ref: ZZLMA050
Application: Defender with 2.5petrol, 2.5diesel, 2.5 turbo diesel, 200TDi or 300TDi. Discovery 1 and Range Rover Classic with 200TDi or 300TDI.
Description: This adaptor screws into oil filter housing in place of oil pressure switch. The switch then screws into one outlet and the oil pressure sender into the other. Thus allowing addition of oil pressure guage to vehicle.
Approximate dimensions: Overall length 60mm(2.4"), body 22mm(0.87") across flats. Threads, male end M10x1.0, female end M10x1.0, tee female 1/8"NPTF-27tpi.

Price: 19.51 (23.41 Including VAT at 20%)



Adaptor for Oil Pressure Sender
Adaptor for Oil Pressure Sender Ref: ZZ070.033
Application: Early models with 1/8"NPTF-27tpi threaded oil pressure switch
Description: This adaptor screws into oil filter housing in place of oil pressure switch. The switch then screws into one outlet and the oil pressure sender into the other. Thus allowing addition of oil pressure guage to vehicle. All three threads are the same.

Price: 13.75 (16.50 Including VAT at 20%)



Adaptor for Oil Pressure Sender
Speedo Drive Cable Ref: RTC3484D
Application: Series One, Series 2 and 2A.
Description: Speedo cable assembly incorporating both inner and ouiter cables.
Approximate dimensions: Overall length 73"(85cm)
Original part numbers: 234536 & 234537, 270717 and 270718.

Price: 8.00 (9.60 Including VAT at 20%)




People who bought this item also bought:
1. Exhaust Mounting Bracket Assembly (Ref: BRKT1)
2. Gaiter for High/Low Gear Lever (Ref: 338871=)
3. Gaiter for Main Gear Lever (Ref: 301437A)
Speedo Drive Cable

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -