Dingocroft Fuel Tanks

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Regular Service and Repair Parts > Fuel System > Fuel Tanks

Under-seat Fuel Tank for Series vehicles Ref: 552174D
Replacement under-seat fuel tank, suitable for both petrol and diesel vehicles.
Application: Series 2, 2A & 3 SWB vehicles. Also LWB vehicles with under-seat tank (non Station Wagon up to about 1974).
Mounting kit and hose kit are available separately - see below.

Price: £58.00 (£69.60 Including VAT at 20%)

Mounting kit for Series Under-seat Tank Ref: ZZPWBRO11AFIX
Full set of fixings to bolt tank to chassis. For use with ZZPWBRO11A.
Price: £9.50 (£11.40 Including VAT at 20%)

Hose kit for Series Under-seat Tank Ref: ZZPWBRO11AHOSE
Filler hose, breather hose and 4x hose clips to suit. For use with Series under-seat tank ZZPWBRO11A.
Price: £10.61 (£12.73 Including VAT at 20%)

Rear Fuel Tank Series 3 LWB Ref: ZZPWBRO10B
Replacement rear fuel tank, suitable for both petrol and diesel vehicles.
Application: Series 3 LWB vehicles from suffix B (approx 1974) onwards. This is the tank with the sender unit secured by lock ring rather than screws.
Mounting kit and hose kit are available separately - see below.
Price: £134.46 (£161.35 Including VAT at 20%)

Replacement Fuel Tank for Defender 110 Ref: ZZPWBRO12D
Replacement rear fuel tank with side apeture only.
Application: Defender 110 upto approx 1985. This tank only has a hole in the side for a combined level unit and fuel pick-up pipe.

This tank is supplied with the support cradle.
Insert fixings included .....
Price: £105.00 (£126.00 Including VAT at 20%)

Mounting kit for ZZPWBRO12D Fuel Tank Ref: ZZPWBRO12DFIX
Full set of fixings to bolt tank to vehicle.
Use with ZZPWBRO12D.
Price: £12.00 (£14.40 Including VAT at 20%)

Replacement Fuel Tank for Defender and Range Rover Classic Ref: ZZPWBRO12E
Replacement rear fuel tank with both side apeture and top apeture.
Application: Defender 110 from approx 1985 onwards both petrol and diesel models.
Range Rover Classic from 1985 to 1990. All diesel models and petrol models without evaporative loss control.

This tank is known as the single vent type.

The tank is supplied with the support cradle

Insert fixings included .....
Price: £109.55 (£131.46 Including VAT at 20%)

Mounting kit for ZZPWBRO12E Fuel Tank. Ref: ZZPWBRO12EFIX
Full set of fixings to bolt tank to vehicle.
Use with ZZPWBRO12E.
Price: £13.50 (£16.20 Including VAT at 20%)

Replacement Fuel Tank for Classic Range Rover Ref: ZZPWBRO12F
Replacement rear fuel tank with both side apeture and top apeture. It also features a set of 3 vent pipes beside the filler neck.
Application: Range Rover Classic from 1985 to 1990, petrol models with evaporative loss control.

This tank is known as the multi vent type.

The tank is supplied with the support cradle.

Insert fixings included .....
Price: £115.60 (£138.72 Including VAT at 20%)

Mounting kit for ZZPWBRO12F Fuel Tank Ref: ZZPWBRO12FFIX
Full set of fixings to bolt tank to vehicle.
Use with ZZPWBRO12F.
Price: £12.00 (£14.40 Including VAT at 20%)

Replacement Fuel Tank for Defender 90 Ref: ZZPWBRO14B
Replacement fuel tank for Defender 90. This is the tank with 2 circular holes in top, fitted from approx 1985 onwards. Suitable for both petrol and diesel.
Insert fixings included .....
Price: £95.00 (£114.00 Including VAT at 20%)

Mounting Kit for Defender 90 Fuel Tank Ref: PWBRO14BFIX
Full set of fixings to bolt tank to vehicle.
Use with ZZPWBRO14B.
Price: £13.22 (£15.86 Including VAT at 20%)

Digital Dispensary > Regular Service and Repair Parts > Fuel System > Fuel Tanks

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Rear Brake Cylinder

£7.98

Application: Freelander One to 'YA'.
Description: Original equipment rear brake cylinder for vehicles to approx 2000. These cylinders are not handed.
Approximate dimensions: Casting 4.7cm(1.85") long
find out more

Caliper Seal Kit

£6.29

Application: Freelander One from '1A'.
Description: Replacement seals to service both front calipers on later vehicles with vented discs.
Approximate dimensions: 2 seals with outside diameter of 7cm(2.8"), 2 'O' rings with outside diameter of 6cm(2.4")
find out more

Kit of Brake Caliper Guide Pins

£17.58

Application: Freelander One from '1A'.
Description: Genuine kit of guide pins to service pair of front brake calipers.
Approximate dimensions: 2 pins 5.9cm(2.3") long, 2 pins 7.0cm(2.8") long.
find out more

Front Brake Disc - Vented

£14.03

Application: Freelander One from '1A'.
Description: Replacement vented brake disc for front wheels. Priced as single disc, but strongly recommended to be fitted in pairs.
Approximate dimensions: Overall diameter 27.6cm(10.9"), 2.0cm(0.8") thick, offset 3.2cm(1.3")
find out more

Fixing Clip kit for Front Pads

£2.96

Application: Freelander One from '1A'.
Description: Genuine set of 4 fixing clips for front brake pads on vehicles with vented front discs.
Approximate dimensions: Each clip is 7.5cm(3") long.
find out more

Front Brake Pad Set - Genuine

£42.74

Application: Freelander One from '1A'.
Description: Genuine boxed front brake pad set for later models with vented discs. Supplied with 4 new fixing bolts.
Approximate dimensions: Each pad is 13cm(5.1") long by 5.5cm(2.1") wide.
Original part number: SFP500100.
find out more

Front Brake Pad Set

£20.69

Application: Freelander One from '1A'.
Description: Mintex boxed front brake pad set for later models with vented discs.
Approximate dimensions: Each pad is 13cm(5.1") long by 5.5cm(2.1") wide.
find out more

Brake Disc - non vented

£11.40

Application: Freelander One to 'YA'.
Description: Replacement solid brake disc for front wheels. Priced as single disc, but stronglt recommended to be fitted in pairs.
Approximate dimensions: Overall diameter 26.2cm(10.3"), 1.4cm(0.55") thick, offset 4cm(1.6")
find out more

Front Brake Pad Set

£25.16

Application: Freelander One to YA.
Description: Delphi boxed set of front brake pads for early models with solid discs.
Approximate dimensions: Each pad is 13cm(5.1") long by 6.7cm(2.6") wide.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO