Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4   >   >>
Relay for Fuel Pump Ref: AGU1068L
Application: Range Rover Classic with fuel injection.

Description: This is the latest Bosch supersession of the fuel pump relay. Originally in an aluminium case. Five terminals marked - 85, 86, 87, 87, 30.

Approximate dimensions including terminals; 28mm(1.1"0 x 28mm(1.1") x 36mm(1.4").

Price: 18.00 (21.60 Including VAT at 20%)



Relay for Fuel Pump
Replacement Fuel Pump ERR5057 & kit. Ref: ERR5057=KIT
OE specification replacement diesel liftpump with fitting kit of 2x union nuts, 2x olives and 2x gaskets.

Application: Discovery 1 300TDi, Defender 300TDi and Range Rover Classic 300TDi.

Price: 30.00 (36.00 Including VAT at 20%)



Replacement Fuel Pump ERR5057 & kit.
Replacement 'In Tank' Pump & Sender Unit Ref: ESR1111=KIT
Original Equipment 'in tank' pump and fuel guage sender unit assembly.

Application: 2nd Generation Range Rover (38A) with BMW diesel engine.

Approximate dimensions: diameter of top plate 120mm x 420mm long.


Price: 128.00 (153.60 Including VAT at 20%)



Replacement 'In Tank' Pump & Sender Unit
Replacement 'In Tank' Fuel Pump Ref: ESR3926=KIT
Application: Discovery 1 V8 from KA chassis number, Discovery 1 NAS - except 'advanced evaporative loss system' vehicles, Range Rover Classic from KA chassis number.

Description: Replacement 'in tank' fuel pump and fuel level unit, seal ring, 2x olives and 2x union nuts.

Price: 145.00 (174.00 Including VAT at 20%)



Replacement 'In Tank' Fuel Pump
Overhaul Kit for DPA Injection Pump Ref: 7135-70
Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.

Description: Replacement seal and gasket set containing approximately 70 items.

Price: 18.50 (22.20 Including VAT at 20%)




People who bought this item also bought:
1. Shut Off Bar for DPA Pump (Ref: 7123-304B)
Overhaul Kit for DPA Injection Pump
Shut Off Bar for DPA Pump Ref: 7123-304B
Application: Series 2a and Series 3 with 2.25 diesel engine.

Description: Fuel shut off bar internal to the CAV-Lucas Injection pump.

Approximate dimensions: Overall length 97mm(3.8")

Price: 10.00 (12.00 Including VAT at 20%)




People who bought this item also bought:
1. Overhaul Kit for DPA Injection Pump (Ref: 7135-70)
Shut Off Bar for DPA Pump
Return Spring DPS Injection Pump Ref: 7174-139
Application: Defender 2.5 diesel and 2.5 diesel turbo.

Description: Return spring for DPS injection pump.

Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")

Price: 3.50 (4.20 Including VAT at 20%)



Return Spring DPS Injection Pump
Overhaul Kit DPS Injection Pump Ref: 7135-121
Application: Defender 2.5 diesel and 2.5 diesel turbo.

Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc

Price: 27.39 (32.87 Including VAT at 20%)




People who bought this item also bought:
1. Diaphragm Kit for DPS Injection Pump (Ref: 7135-277)
Overhaul Kit DPS Injection Pump
Diaphragm Kit for DPS Injection Pump Ref: 7135-277
Application: Defender 2.5 diesel and 2.5 diesel turbo.

Description: Replacement diaphragm and fitting kit for DPS injection pump.

Approximate dimensions: Overall diameter for diaphragm 43.5mm(1.7").

Price: 21.75 (26.10 Including VAT at 20%)




People who bought this item also bought:
1. Overhaul Kit DPS Injection Pump (Ref: 7135-121)
Diaphragm Kit for DPS Injection Pump
Seal Kit for Bosch Injection Pump Ref: ZZRGK223/1
Application: Defender 1990 to 1999, Discovery 1 and Range Rover Classic 1990 to 1995 when fitted with either 200TDi or 300TDi engine.

Description: Replacement seal kit for Bosch EP/VE 4 & 6 cylinder injection pumps.

Price: 24.65 (29.58 Including VAT at 20%)



Seal Kit for Bosch Injection Pump
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -